diff options
Diffstat (limited to 'board/palkia/board.h')
-rw-r--r-- | board/palkia/board.h | 130 |
1 files changed, 0 insertions, 130 deletions
diff --git a/board/palkia/board.h b/board/palkia/board.h deleted file mode 100644 index 3e1baf8a4f..0000000000 --- a/board/palkia/board.h +++ /dev/null @@ -1,130 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Palkia board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* Baseboard features */ -#include "baseboard.h" - -#define CONFIG_POWER_BUTTON -#define CONFIG_KEYBOARD_PROTOCOL_8042 -#define CONFIG_LED_COMMON -#define CONFIG_LOW_POWER_IDLE - -#define CONFIG_HOSTCMD_ESPI - -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 4096 - -/* Keyboard features */ -#define CONFIG_PWM_KBLIGHT -#define CONFIG_KEYBOARD_CUSTOMIZATION - -/* Enable board_config_pre_init() */ -#define CONFIG_BOARD_PRE_INIT - -/* USB Type C and USB PD defines */ -#define CONFIG_USB_PD_COMM_LOCKED -#define CONFIG_USB_PD_TCPM_PS8751 -#define BOARD_TCPC_C0_RESET_HOLD_DELAY PS8XXX_RESET_DELAY_MS -#define BOARD_TCPC_C0_RESET_POST_DELAY 0 -#define GPIO_USB_C0_TCPC_RST GPIO_USB_C0_TCPC_RST_ODL - -/* USB Type A Features */ -#define CONFIG_USB_PORT_POWER_SMART -#undef CONFIG_USB_PORT_POWER_SMART_PORT_COUNT -#define CONFIG_USB_PORT_POWER_SMART_PORT_COUNT 1 -#define CONFIG_USB_PORT_POWER_SMART_CDP_SDP_ONLY -#define GPIO_USB1_ILIM_SEL GPIO_USB_A_LOW_PWR_ODL - -/* - * Palkia' battery takes several seconds to come back out of its disconnect - * state (~4.2 seconds on the unit I have, so give it a little more for margin). - */ -#undef CONFIG_POWER_BUTTON_INIT_TIMEOUT -#define CONFIG_POWER_BUTTON_INIT_TIMEOUT 6 - -/* BC 1.2 */ -#define CONFIG_BC12_DETECT_PI3USB9201 - -/* Fan features */ -#define CONFIG_FANS 1 -#undef CONFIG_FAN_INIT_SPEED -#define CONFIG_FAN_INIT_SPEED 50 -#define CONFIG_TEMP_SENSOR_POWER_GPIO GPIO_EN_A_RAILS -#define CONFIG_THERMISTOR -#define CONFIG_THROTTLE_AP -#define CONFIG_STEINHART_HART_3V3_30K9_47K_4050B - -/* DPTF */ -#define CONFIG_DPTF_MULTI_PROFILE - -/* - * Macros for GPIO signals used in common code that don't match the - * schematic names. Signal names in gpio.inc match the schematic and are - * then redefined here to so it's more clear which signal is being used for - * which purpose. - */ -#define GPIO_PCH_RSMRST_L GPIO_EC_PCH_RSMRST_L -#define GPIO_PCH_SLP_S0_L GPIO_SLP_S0_L -#define GPIO_CPU_PROCHOT GPIO_EC_PROCHOT_ODL -#define GPIO_AC_PRESENT GPIO_ACOK_OD -#define GPIO_RSMRST_L_PGOOD GPIO_PG_EC_RSMRST_L -#define GPIO_PCH_SYS_PWROK GPIO_EC_PCH_SYS_PWROK -#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L -#define GPIO_PCH_SLP_S4_L GPIO_SLP_S4_L -#define GPIO_EN_PP5000 GPIO_EN_PP5000_A - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" - -enum adc_channel { - ADC_TEMP_SENSOR_1, /* ADC0 */ - ADC_TEMP_SENSOR_2, /* ADC1 */ - ADC_TEMP_SENSOR_3, /* ADC3 */ - ADC_TEMP_SENSOR_4, /* ADC2 */ - ADC_CH_COUNT -}; - -enum pwm_channel { - PWM_CH_KBLIGHT, - PWM_CH_FAN, - PWM_CH_COUNT -}; - -enum fan_channel { - FAN_CH_0 = 0, - /* Number of FAN channels */ - FAN_CH_COUNT, -}; - -enum mft_channel { - MFT_CH_0 = 0, - /* Number of MFT channels */ - MFT_CH_COUNT, -}; - -enum temp_sensor_id { - TEMP_SENSOR_1, - TEMP_SENSOR_2, - TEMP_SENSOR_3, - TEMP_SENSOR_4, - TEMP_SENSOR_COUNT -}; - -/* List of possible batteries */ -enum battery_type { - BATTERY_DYNAPACK_UX48144, - BATTERY_TYPE_COUNT, -}; - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ |