diff options
Diffstat (limited to 'board/peppy/board.h')
| -rw-r--r-- | board/peppy/board.h | 80 |
1 files changed, 1 insertions, 79 deletions
diff --git a/board/peppy/board.h b/board/peppy/board.h index b586816fc9..e3a85db5bc 100644 --- a/board/peppy/board.h +++ b/board/peppy/board.h @@ -57,85 +57,7 @@ /* USB ports */ #define USB_PORT_COUNT 2 -/* GPIO signal definitions. */ -enum gpio_signal { - /* Inputs with interrupt handlers are first for efficiency */ - GPIO_POWER_BUTTON_L = 0, /* Power button */ - GPIO_LID_OPEN, /* Lid switch */ - GPIO_AC_PRESENT, /* AC power present */ - GPIO_PCH_BKLTEN, /* Backlight enable signal from PCH */ - GPIO_PCH_SLP_S0_L, /* SLP_S0# signal from PCH */ - GPIO_PCH_SLP_S3_L, /* SLP_S3# signal from PCH */ - GPIO_PCH_SLP_S5_L, /* SLP_S5# signal from PCH */ - GPIO_PCH_SLP_SUS_L, /* SLP_SUS# signal from PCH */ - GPIO_PP1050_PGOOD, /* Power good on 1.05V */ - GPIO_PP1350_PGOOD, /* Power good on 1.35V (DRAM) */ - GPIO_PP5000_PGOOD, /* Power good on 5V */ - GPIO_VCORE_PGOOD, /* Power good on core VR */ - GPIO_PCH_EDP_VDD_EN, /* PCH wants EDP enabled */ - GPIO_RECOVERY_L, /* Recovery signal from servo */ - GPIO_WP_L, /* Write protect input */ - GPIO_JTAG_TCK, /* JTAG clock input */ - GPIO_UART0_RX, /* UART0 RX input */ - - /* Other inputs */ - GPIO_FAN_ALERT_L, /* From thermal sensor */ - GPIO_PCH_SUSWARN_L, /* SUSWARN# signal from PCH */ - GPIO_USB1_OC_L, /* USB port overcurrent warning */ - GPIO_USB2_OC_L, /* USB port overcurrent warning */ - GPIO_BOARD_VERSION1, /* Board version stuffing resistor 1 */ - GPIO_BOARD_VERSION2, /* Board version stuffing resistor 2 */ - GPIO_BOARD_VERSION3, /* Board version stuffing resistor 3 */ - GPIO_CPU_PGOOD, /* Power good to the CPU */ - GPIO_BAT_PRESENT_L, /* Battery present. Repurposed BAT_TEMP */ - - /* Outputs */ - GPIO_CPU_PROCHOT, /* Force CPU to think it's overheated */ - GPIO_PP1350_EN, /* Enable 1.35V supply */ - GPIO_PP3300_DX_EN, /* Enable power to lots of peripherals */ - GPIO_PP3300_LTE_EN, /* Enable LTE radio */ - GPIO_PP3300_WLAN_EN, /* Enable WiFi power */ - GPIO_SUSP_VR_EN, /* Enable 1.05V regulator */ - GPIO_VCORE_EN, /* Stuffing option - not connected */ - GPIO_PP5000_EN, /* Enable 5V supply */ - GPIO_PP5000_FAN_EN, /* Enable fan power rail */ - GPIO_SYS_PWROK, /* EC thinks everything is up and ready */ - GPIO_WLAN_OFF_L, /* Disable WiFi radio */ - GPIO_CHARGE_L, /* Allow battery to charge when on AC */ - - GPIO_ENABLE_BACKLIGHT, /* Enable backlight power */ - GPIO_ENABLE_TOUCHPAD, /* Enable touchpad power */ - GPIO_ENTERING_RW, /* Indicate when EC is entering RW code */ - GPIO_PCH_DPWROK, /* Indicate when VccDSW is good */ - - GPIO_PCH_HDA_SDO, /* HDA_SDO signal to PCH; when high, ME - * ignores security descriptor */ - GPIO_PCH_WAKE_L, /* Wake signal from EC to PCH */ - GPIO_PCH_NMI_L, /* Non-maskable interrupt pin to PCH */ - GPIO_PCH_PWRBTN_L, /* Power button output to PCH */ - GPIO_PCH_PWROK, /* PWROK / APWROK signals to PCH */ - GPIO_PCH_RCIN_L, /* RCIN# line to PCH (for 8042 emulation) */ - GPIO_PCH_RSMRST_L, /* Reset PCH resume power plane logic */ - GPIO_PCH_SMI_L, /* System management interrupt to PCH */ - GPIO_TOUCHSCREEN_RESET_L, /* Reset touch screen */ - GPIO_EC_EDP_VDD_EN, /* Enable EDP (passthru from PCH) */ - GPIO_LPC_CLKRUN_L, /* Dunno. Probably important, though. */ - - GPIO_USB1_ENABLE, /* USB port 1 output power enable */ - GPIO_USB2_ENABLE, /* USB port 2 output power enable */ - - GPIO_PCH_SUSACK_L, /* Acknowledge PCH SUSWARN# signal */ - GPIO_PCH_RTCRST_L, /* Not supposed to be here */ - GPIO_PCH_SRTCRST_L, /* Not supposed to be here */ - - GPIO_BAT_LED0_L, /* Battery charging LED - blue */ - GPIO_BAT_LED1_L, /* Battery charging LED - orange */ - GPIO_PWR_LED0_L, /* Power LED - blue */ - GPIO_PWR_LED1_L, /* Power LED - orange */ - - /* Number of GPIOs; not an actual GPIO */ - GPIO_COUNT -}; +#include "gpio_signal.h" /* power signal definitions */ enum power_signal { |