diff options
Diffstat (limited to 'board/puff/gpio.inc')
| -rw-r--r-- | board/puff/gpio.inc | 150 |
1 files changed, 0 insertions, 150 deletions
diff --git a/board/puff/gpio.inc b/board/puff/gpio.inc deleted file mode 100644 index f578c2b6c9..0000000000 --- a/board/puff/gpio.inc +++ /dev/null @@ -1,150 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Declare symbolic names for all the GPIOs that we care about. - * Pin names follow the schematic, and are aliased to other names if necessary. - * Note: Those with interrupt handlers must be declared first. */ - -/* Wake Source interrupts */ -GPIO_INT(EC_WP_ODL, PIN(A, 1), GPIO_INT_BOTH, switch_interrupt) -GPIO_INT(H1_EC_PWR_BTN_ODL, PIN(0, 1), GPIO_INT_BOTH, power_button_interrupt) - -/* Power sequencing interrupts */ -GPIO_INT(PG_PP5000_A_OD, PIN(D, 7), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(PG_PP1800_A_OD, PIN(3, 1), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(PG_VPRIM_CORE_A_OD, PIN(2, 3), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(PG_PP1050_A_OD, PIN(2, 2), GPIO_INT_BOTH, power_signal_interrupt) -#ifndef CONFIG_HOSTCMD_ESPI_VW_SLP_S4 -GPIO_INT(SLP_S4_L, PIN(D, 4), GPIO_INT_BOTH, power_signal_interrupt) -#endif -GPIO_INT(PG_PP2500_DRAM_U_OD, PIN(2, 0), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(PG_PP1200_U_OD, PIN(2, 1), GPIO_INT_BOTH, power_signal_interrupt) -#ifndef CONFIG_HOSTCMD_ESPI_VW_SLP_S3 -GPIO_INT(SLP_S3_L, PIN(A, 5), GPIO_INT_BOTH, power_signal_interrupt) -#endif -GPIO_INT(PG_PP950_VCCIO_OD, PIN(1, 7), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(SLP_S0_L, PIN(D, 5), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(CPU_C10_GATE_L, PIN(6, 7), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(IMVP8_VRRDY_OD, PIN(1, 6), GPIO_INT_BOTH, power_signal_interrupt) - -/* Other interrupts */ -GPIO_INT(USB_C0_TCPPC_INT_ODL, PIN(E, 0), GPIO_INT_FALLING, ppc_interrupt) -GPIO_INT(USB_C0_TCPC_INT_ODL, PIN(6, 2), GPIO_INT_FALLING, tcpc_alert_event) -GPIO_INT(H1_EC_RECOVERY_BTN_ODL, PIN(2, 4), GPIO_INT_BOTH, button_interrupt) - -/* PCH/CPU signals */ -GPIO(EC_PCH_SYS_PWROK, PIN(3, 7), GPIO_OUT_LOW) -GPIO(EC_PCH_RSMRST_L, PIN(A, 6), GPIO_OUT_LOW) -GPIO(EC_PCH_PWR_BTN_ODL, PIN(C, 1), GPIO_ODR_HIGH) -GPIO(EC_PCH_RTCRST, PIN(7, 6), GPIO_ODR_HIGH) -GPIO(EC_PCH_WAKE_ODL, PIN(7, 4), GPIO_ODR_HIGH) -GPIO(EC_PROCHOT_IN_OD, PIN(3, 4), GPIO_INPUT) -GPIO(EC_PROCHOT_ODL, PIN(6, 3), GPIO_ODR_HIGH) -GPIO(SYS_RST_ODL, PIN(C, 5), GPIO_ODR_HIGH) - -/* Power control outputs */ -GPIO(EN_PP5000_A, PIN(A, 4), GPIO_OUT_LOW) -GPIO(EN_PP3300_INA_H1_EC_ODL, PIN(5, 7), GPIO_ODR_HIGH) -GPIO(EN_PP1800_A, PIN(1, 5), GPIO_OUT_LOW) -GPIO(VCCST_PG_OD, PIN(1, 4), GPIO_ODR_HIGH) -GPIO(EN_S0_RAILS, PIN(1, 1), GPIO_OUT_LOW) -GPIO(EN_ROA_RAILS, PIN(A, 3), GPIO_OUT_LOW) -GPIO(EN_PP950_VCCIO, PIN(1, 0), GPIO_OUT_LOW) -GPIO(EC_IMVP8_PE, PIN(A, 7), GPIO_OUT_LOW) -GPIO(EN_IMVP8_VR, PIN(F, 4), GPIO_OUT_LOW) - -/* Barreljack */ -GPIO(EN_PPVAR_BJ_ADP_L, PIN(0, 4), GPIO_OUT_LOW) -GPIO(BJ_ADP_PRESENT_L, PIN(8, 2), GPIO_INPUT) - -/* USB type A */ -GPIO(EN_PP5000_USB_VBUS, PIN(8, 3), GPIO_OUT_LOW) -GPIO(USB_A_LOW_PWR_OD, PIN(9, 4), GPIO_ODR_HIGH) -GPIO(USB_A0_OC_ODL, PIN(E, 4), GPIO_ODR_HIGH) -GPIO(USB_A1_OC_ODL, PIN(A, 2), GPIO_ODR_HIGH) -GPIO(USB_A2_OC_ODL, PIN(F, 5), GPIO_ODR_HIGH) -GPIO(USB_A3_OC_ODL, PIN(0, 3), GPIO_ODR_HIGH) -GPIO(USB_A4_OC_ODL, PIN(B, 0), GPIO_ODR_HIGH) - -/* USB type C */ -GPIO(USB_C0_TCPC_RST, PIN(9, 7), GPIO_OUT_LOW) - -/* Misc. */ -GPIO(M2_SSD_PLN, PIN(A, 0), GPIO_INPUT) -GPIO(EC_ENTERING_RW, PIN(E, 3), GPIO_OUT_LOW) -GPIO(CCD_MODE_ODL, PIN(E, 5), GPIO_ODR_HIGH) -GPIO(HDMI_CONN0_OC_ODL, PIN(0, 7), GPIO_ODR_HIGH) -GPIO(HDMI_CONN1_OC_ODL, PIN(0, 6), GPIO_ODR_HIGH) -GPIO(EN_PP_MST_OD, PIN(9, 6), GPIO_ODR_LOW) - -/* I2C pins - Alternate function below configures I2C module on these pins */ -GPIO(I2C0_SCL, PIN(B, 5), GPIO_INPUT) /* EC_I2C_INA_SCL */ -GPIO(I2C0_SDA, PIN(B, 4), GPIO_INPUT) /* EC_I2C_INA_SDA */ -GPIO(I2C1_SCL, PIN(9, 0), GPIO_INPUT) /* EC_I2C_USB_C0_TCPPC_SCL */ -GPIO(I2C1_SDA, PIN(8, 7), GPIO_INPUT) /* EC_I2C_USB_C0_TCPPC_SDA */ -GPIO(I2C3_SCL, PIN(D, 1), GPIO_INPUT) /* EC_I2C_USB_C0_TCPC_SCL */ -GPIO(I2C3_SDA, PIN(D, 0), GPIO_INPUT) /* EC_I2C_USB_C0_TCPC_SDA */ -GPIO(I2C5_SCL, PIN(3, 3), GPIO_INPUT) /* EC_I2C_IMVP8_SCL */ -GPIO(I2C5_SDA, PIN(3, 6), GPIO_INPUT) /* EC_I2C_IMVP8_SDA */ -GPIO(I2C7_SCL, PIN(B, 3), GPIO_INPUT) /* EC_I2C_EEPROM_SCL */ -GPIO(I2C7_SDA, PIN(B, 2), GPIO_INPUT) /* EC_I2C_EEPROM_SDA */ - -/* Alternate functions GPIO definitions */ -ALTERNATE(PIN_MASK(B, 0x30), 0, MODULE_I2C, 0) /* I2C0 */ -ALTERNATE(PIN_MASK(9, 0x01), 0, MODULE_I2C, 0) /* I2C1 SCL */ -ALTERNATE(PIN_MASK(8, 0x80), 0, MODULE_I2C, 0) /* I2C1 SDA */ -ALTERNATE(PIN_MASK(D, 0x03), 0, MODULE_I2C, 0) /* I2C3 */ -ALTERNATE(PIN_MASK(3, 0x48), 0, MODULE_I2C, 0) /* I2C5 */ -ALTERNATE(PIN_MASK(B, 0x0C), 0, MODULE_I2C, 0) /* I2C7 */ - -/* PWM */ -ALTERNATE(PIN_MASK(C, 0x08), 0, MODULE_PWM, 0) /* PWM0 - Red Led */ -ALTERNATE(PIN_MASK(C, 0x10), 0, MODULE_PWM, 0) /* PWM2 - Green Led */ -ALTERNATE(PIN_MASK(B, 0x80), 0, MODULE_PWM, 0) /* PWM5 - Fan 1 */ -ALTERNATE(PIN_MASK(4, 0x01), 0, MODULE_PWM, 0) /* TA1 - Fan Tachometer */ - -/* ADC */ -ALTERNATE(PIN_MASK(4, 0x3E), 0, MODULE_ADC, 0) /* ADC0-4 */ -ALTERNATE(PIN_MASK(E, 0x02), 0, MODULE_ADC, 0) /* ADC7 */ -ALTERNATE(PIN_MASK(F, 0x01), 0, MODULE_ADC, 0) /* ADC9 */ - -/* UART */ -ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0) /* UART from EC to Servo */ - -/* Unused pins */ -UNUSED(PIN(1, 3)) /* EC_GP_SEL1_ODL */ -UNUSED(PIN(F, 2)) /* EC_I2C_RFU_SDA */ -UNUSED(PIN(F, 3)) /* EC_I2C_RFU_SCL */ -UNUSED(PIN(C, 0)) /* FAN_PWM_2 */ -UNUSED(PIN(7, 3)) /* FAN_SPEED_TACH_2 */ -UNUSED(PIN(8, 0)) /* LED_BLUE_L */ -UNUSED(PIN(4, 2)) /* TEMP_SENSOR_3 */ -UNUSED(PIN(9, 2)) /* K8 NC */ -UNUSED(PIN(9, 1)) /* L8 NC */ -UNUSED(PIN(1, 2)) /* C6 NC */ -UNUSED(PIN(6, 1)) /* L3 NC */ -UNUSED(PIN(C, 7)) /* B9 NC */ -UNUSED(PIN(6, 6)) /* H4 NC */ -UNUSED(PIN(8, 1)) /* L6 NC */ -UNUSED(PIN(C, 6)) /* B11 NC */ -UNUSED(PIN(E, 2)) /* B8 NC */ -UNUSED(PIN(8, 5)) /* L7 NC */ -UNUSED(PIN(0, 0)) /* D11 NC */ -UNUSED(PIN(3, 2)) /* E5 NC */ -UNUSED(PIN(D, 6)) /* F6 NC */ -UNUSED(PIN(3, 5)) /* F5 NC */ -UNUSED(PIN(5, 6)) /* M2 NC */ -UNUSED(PIN(5, 0)) /* G4 NC */ -UNUSED(PIN(D, 2)) /* C11 NC */ -UNUSED(PIN(D, 3)) /* E9 NC */ -UNUSED(PIN(8, 6)) /* J8 NC */ -UNUSED(PIN(7, 5)) /* J6 NC */ -UNUSED(PIN(C, 2)) /* A12 NC */ -UNUSED(PIN(6, 0)) /* G5 NC */ -UNUSED(PIN(9, 3)) /* M11 NC */ -UNUSED(PIN(7, 2)) /* H6 NC */ -UNUSED(PIN(F, 1)) /* G3 NC */ |