diff options
Diffstat (limited to 'board/ryu_p1/board.c')
-rw-r--r-- | board/ryu_p1/board.c | 178 |
1 files changed, 178 insertions, 0 deletions
diff --git a/board/ryu_p1/board.c b/board/ryu_p1/board.c new file mode 100644 index 0000000000..eb336131a0 --- /dev/null +++ b/board/ryu_p1/board.c @@ -0,0 +1,178 @@ +/* Copyright (c) 2014 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ +/* ryu board configuration */ + +#include "adc.h" +#include "adc_chip.h" +#include "battery.h" +#include "charger.h" +#include "common.h" +#include "console.h" +#include "gpio.h" +#include "hooks.h" +#include "host_command.h" +#include "i2c.h" +#include "inductive_charging.h" +#include "lid_switch.h" +#include "power.h" +#include "power_button.h" +#include "registers.h" +#include "task.h" +#include "usb_pd.h" +#include "usb_pd_config.h" +#include "util.h" + +void vbus_evt(enum gpio_signal signal) +{ + ccprintf("VBUS %d, %d!\n", signal, gpio_get_level(signal)); + task_wake(TASK_ID_PD); +} + +void unhandled_evt(enum gpio_signal signal) +{ + ccprintf("Unhandled INT %d,%d!\n", signal, gpio_get_level(signal)); +} + +#include "gpio_list.h" + +/* Initialize board. */ +static void board_init(void) +{ + /* + * Determine recovery mode is requested by the power, volup, and + * voldown buttons being pressed. + */ + if (power_button_signal_asserted() && + !gpio_get_level(GPIO_BTN_VOLD_L) && + !gpio_get_level(GPIO_BTN_VOLU_L)) + host_set_single_event(EC_HOST_EVENT_KEYBOARD_RECOVERY); + + /* + * Enable CC lines after all GPIO have been initialized. Note, it is + * important that this is enabled after the CC_DEVICE_ODL lines are + * set low to specify device mode. + */ + gpio_set_level(GPIO_USBC_CC_EN, 1); + + /* Enable interrupts on VBUS transitions. */ + gpio_enable_interrupt(GPIO_CHGR_ACOK); +} +DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT); + +/* power signal list. Must match order of enum power_signal. */ +const struct power_signal_info power_signal_list[] = { + {GPIO_AP_HOLD, 1, "AP_HOLD"}, + {GPIO_AP_IN_SUSPEND, 1, "SUSPEND_ASSERTED"}, +}; +BUILD_ASSERT(ARRAY_SIZE(power_signal_list) == POWER_SIGNAL_COUNT); + +/* ADC channels */ +const struct adc_t adc_channels[] = { + /* Vbus sensing. Converted to mV, /10 voltage divider. */ + [ADC_VBUS] = {"VBUS", 30000, 4096, 0, STM32_AIN(0)}, + /* USB PD CC lines sensing. Converted to mV (3000mV/4096). */ + [ADC_CC1_PD] = {"CC1_PD", 3000, 4096, 0, STM32_AIN(1)}, + [ADC_CC2_PD] = {"CC1_PD", 3000, 4096, 0, STM32_AIN(3)}, + /* Charger current sensing. Converted to mA. */ + [ADC_IADP] = {"IADP", 7500, 4096, 0, STM32_AIN(8)}, + [ADC_IBAT] = {"IBAT", 37500, 4096, 0, STM32_AIN(13)}, +}; +BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); + +/* I2C ports */ +const struct i2c_port_t i2c_ports[] = { + {"master", I2C_PORT_MASTER, 100, + GPIO_MASTER_I2C_SCL, GPIO_MASTER_I2C_SDA}, + {"slave", I2C_PORT_SLAVE, 100, + GPIO_SLAVE_I2C_SCL, GPIO_SLAVE_I2C_SDA}, +}; +const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); + +void board_set_usb_mux(int port, enum typec_mux mux, int polarity) +{ + /* reset everything */ + gpio_set_level(GPIO_USBC_SS_EN_L, 1); + gpio_set_level(GPIO_USBC_DP_MODE_L, 1); + gpio_set_level(GPIO_USBC_DP_POLARITY, 1); + gpio_set_level(GPIO_USBC_SS1_USB_MODE_L, 1); + gpio_set_level(GPIO_USBC_SS2_USB_MODE_L, 1); + + if (mux == TYPEC_MUX_NONE) + /* everything is already disabled, we can return */ + return; + + if (mux == TYPEC_MUX_USB || mux == TYPEC_MUX_DOCK) { + /* USB 3.0 uses 2 superspeed lanes */ + gpio_set_level(polarity ? GPIO_USBC_SS2_USB_MODE_L : + GPIO_USBC_SS1_USB_MODE_L, 0); + } + + if (mux == TYPEC_MUX_DP || mux == TYPEC_MUX_DOCK) { + /* DP uses available superspeed lanes (x2 or x4) */ + gpio_set_level(GPIO_USBC_DP_POLARITY, polarity); + gpio_set_level(GPIO_USBC_DP_MODE_L, 0); + } + /* switch on superspeed lanes */ + gpio_set_level(GPIO_USBC_SS_EN_L, 0); +} + +int board_get_usb_mux(int port, const char **dp_str, const char **usb_str) +{ + int has_ss = !gpio_get_level(GPIO_USBC_SS_EN_L); + int has_usb = !gpio_get_level(GPIO_USBC_SS1_USB_MODE_L) || + !gpio_get_level(GPIO_USBC_SS2_USB_MODE_L); + int has_dp = !gpio_get_level(GPIO_USBC_DP_MODE_L); + + if (has_dp) + *dp_str = gpio_get_level(GPIO_USBC_DP_POLARITY) ? "DP2" : "DP1"; + else + *dp_str = NULL; + + if (has_usb) + *usb_str = gpio_get_level(GPIO_USBC_SS1_USB_MODE_L) ? + "USB2" : "USB1"; + else + *usb_str = NULL; + + return has_ss; +} + +void board_flip_usb_mux(int port) +{ + int usb_polarity; + + /* Flip DP polarity */ + gpio_set_level(GPIO_USBC_DP_POLARITY, + !gpio_get_level(GPIO_USBC_DP_POLARITY)); + + /* Flip USB polarity if enabled */ + if (gpio_get_level(GPIO_USBC_SS1_USB_MODE_L) && + gpio_get_level(GPIO_USBC_SS2_USB_MODE_L)) + return; + usb_polarity = gpio_get_level(GPIO_USBC_SS1_USB_MODE_L); + + /* + * Disable both sides first so that we don't enable both at the + * same time accidentally. + */ + gpio_set_level(GPIO_USBC_SS1_USB_MODE_L, 1); + gpio_set_level(GPIO_USBC_SS2_USB_MODE_L, 1); + + gpio_set_level(GPIO_USBC_SS1_USB_MODE_L, !usb_polarity); + gpio_set_level(GPIO_USBC_SS2_USB_MODE_L, usb_polarity); +} + +/** + * Discharge battery when on AC power for factory test. + */ +int board_discharge_on_ac(int enable) +{ + return charger_discharge_on_ac(enable); +} + +int extpower_is_present(void) +{ + return gpio_get_level(GPIO_CHGR_ACOK); +} |