diff options
Diffstat (limited to 'board/sand/gpio.inc')
| -rw-r--r-- | board/sand/gpio.inc | 16 |
1 files changed, 5 insertions, 11 deletions
diff --git a/board/sand/gpio.inc b/board/sand/gpio.inc index 00e3ba9ecf..32d1a3cde9 100644 --- a/board/sand/gpio.inc +++ b/board/sand/gpio.inc @@ -29,21 +29,11 @@ GPIO_INT(AC_PRESENT, PIN(C, 1), GPIO_INT_BOTH, extpower_interrupt) /* ACOK_OD /* TODO: We might remove external pull-up for POWER_BUTTON_L in EVT */ GPIO_INT(POWER_BUTTON_L, PIN(0, 4), GPIO_INT_BOTH, power_button_interrupt) /* MECH_PWR_BTN_ODL */ GPIO_INT(LID_OPEN, PIN(6, 7), GPIO_INT_BOTH, lid_interrupt) -/* Volume up and down buttons need to be swapped. The one closer to the hinge - * should be volume up and the one closer to the user should be volume down. - * (cros.bug/p/60057) */ -GPIO_INT(EC_VOLDN_BTN_ODL_SWAPPED, PIN(8, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) -GPIO_INT(EC_VOLUP_BTN_ODL_SWAPPED, PIN(8, 2), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) -#define GPIO_EC_VOLDN_BTN_ODL GPIO_EC_VOLUP_BTN_ODL_SWAPPED -#define GPIO_EC_VOLUP_BTN_ODL GPIO_EC_VOLDN_BTN_ODL_SWAPPED -/* Tablet switch is active-low. L: lid is attached (360 position) H: detached */ -GPIO_INT(TABLET_MODE_L, PIN(3, 6), GPIO_INT_BOTH, tablet_mode_interrupt) GPIO_INT(WP_L, PIN(4, 0), GPIO_INT_BOTH | GPIO_SEL_1P8V, switch_interrupt) /* EC_WP_ODL */ GPIO_INT(BASE_SIXAXIS_INT_L, PIN(9, 3), GPIO_INT_FALLING | GPIO_SEL_1P8V, bmi160_interrupt) -GPIO(LID_ACCEL_INT_L, PIN(C, 7), GPIO_INPUT | GPIO_SEL_1P8V) /* I2C GPIOs will be set to alt. function later. */ GPIO(EC_I2C_GYRO_SDA, PIN(8, 7), GPIO_INPUT | GPIO_SEL_1P8V) @@ -78,6 +68,11 @@ GPIO(PCH_SLP_S0_L, PIN(7, 5), GPIO_INPUT) /* SLP_S0_L */ ALTERNATE(PIN_MASK(4, 0x08), 1, MODULE_ADC, 0) GPIO(EC_BRD_ID_EN_ODL, PIN(3, 5), GPIO_INPUT) +GPIO(NC_36, PIN(3, 6), GPIO_INPUT | GPIO_PULL_UP) /* NC */ +GPIO(NC_82, PIN(8, 2), GPIO_INPUT | GPIO_PULL_UP) /* NC */ +GPIO(NC_83, PIN(8, 3), GPIO_INPUT | GPIO_PULL_UP) /* NC */ +GPIO(NC_C7, PIN(C, 7), GPIO_INPUT | GPIO_PULL_UP) /* NC */ + GPIO(CCD_MODE_ODL, PIN(6, 3), GPIO_INPUT) GPIO(EC_HAVEN_RESET_ODL, PIN(0, 2), GPIO_ODR_HIGH) GPIO(ENTERING_RW, PIN(7, 6), GPIO_OUTPUT) /* EC_ENTERING_RW */ @@ -163,7 +158,6 @@ ALTERNATE(PIN(4, 5), 6, MODULE_ADC, 0) /* TEMP_SENSOR_CHARGER (FIXME: alt funct ALTERNATE(PIN_MASK(8, 0x80), 1, MODULE_I2C, 0) /* GPIO87 for EC_I2C_GYRO_SDA */ ALTERNATE(PIN_MASK(9, 0x01), 1, MODULE_I2C, 0) /* GPIO90 for EC_I2C_GYRO_SCL */ -ALTERNATE(PIN_MASK(9, 0x06), 1, MODULE_I2C, 0) /* GPIO92-91 for EC_I2C_SENSOR_SDA/SCL */ ALTERNATE(PIN_MASK(B, 0x30), 1, MODULE_I2C, 0) /* GPIOB5-B4 for EC_I2C_USB_C0_PD_SDA/SCL */ ALTERNATE(PIN_MASK(B, 0x0C), 1, MODULE_I2C, 0) /* GPOPB3-B2 for EC_I2C_USB_C1_PD_SDA/SCL */ ALTERNATE(PIN_MASK(D, 0x03), 1, MODULE_I2C, 0) /* GPIOD1-D0 for EC_I2C_POWER_SDA/SCL */ |