diff options
Diffstat (limited to 'board/servo_micro/board.c')
-rw-r--r-- | board/servo_micro/board.c | 261 |
1 files changed, 261 insertions, 0 deletions
diff --git a/board/servo_micro/board.c b/board/servo_micro/board.c new file mode 100644 index 0000000000..f22bda4342 --- /dev/null +++ b/board/servo_micro/board.c @@ -0,0 +1,261 @@ +/* Copyright 2016 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ +/* Servo micro board configuration */ + +#include "common.h" +#include "ec_version.h" +#include "gpio.h" +#include "hooks.h" +#include "i2c.h" +#include "queue_policies.h" +#include "registers.h" +#include "spi.h" +#include "task.h" +#include "usart-stm32f0.h" +#include "usart_tx_dma.h" +#include "usart_rx_dma.h" +#include "usb_gpio.h" +#include "usb_i2c.h" +#include "usb_spi.h" +#include "usb-stream.h" +#include "util.h" + + +/****************************************************************************** + * Build GPIO tables and expose a subset of the GPIOs over USB. + */ + +#include "gpio_list.h" + +static enum gpio_signal const usb_gpio_list[] = { +GPIO_UART1_EN_L, +GPIO_SERVO_JTAG_TRST_L, +GPIO_SPI1_BUF_EN_L, +GPIO_SPI2_BUF_EN_L, +GPIO_UART2_EN_L, +GPIO_SPI1_VREF_33, +GPIO_SPI1_VREF_18, +GPIO_SPI2_VREF_33, +GPIO_SPI2_VREF_18, +GPIO_SERVO_JTAG_TRST_DIR, +GPIO_SERVO_JTAG_TDI_DIR, +GPIO_TCA6416_RESET_L +}; + +/* + * This instantiates struct usb_gpio_config const usb_gpio, plus several other + * variables, all named something beginning with usb_gpio_ + */ +USB_GPIO_CONFIG(usb_gpio, + usb_gpio_list, + USB_IFACE_GPIO, + USB_EP_GPIO); + + +/****************************************************************************** + * Forward UARTs as a USB serial interface. + */ + +#define USB_STREAM_RX_SIZE 16 +#define USB_STREAM_TX_SIZE 16 + +/****************************************************************************** + * Forward USART2 as a simple USB serial interface. + */ + +static struct usart_config const usart2; +struct usb_stream_config const usart2_usb; + +static struct queue const usart2_to_usb = QUEUE_DIRECT(64, uint8_t, + usart2.producer, usart2_usb.consumer); +static struct queue const usb_to_usart2 = QUEUE_DIRECT(64, uint8_t, + usart2_usb.producer, usart2.consumer); + +static struct usart_config const usart2 = + USART_CONFIG(usart2_hw, + usart_rx_interrupt, + usart_tx_interrupt, + 115200, + usart2_to_usb, + usb_to_usart2); + +USB_STREAM_CONFIG(usart2_usb, + USB_IFACE_USART2_STREAM, + USB_STR_USART2_STREAM_NAME, + USB_EP_USART2_STREAM, + USB_STREAM_RX_SIZE, + USB_STREAM_TX_SIZE, + usb_to_usart2, + usart2_to_usb) + + +/****************************************************************************** + * Forward USART3 as a simple USB serial interface. + */ + +static struct usart_config const usart3; +struct usb_stream_config const usart3_usb; + +static struct queue const usart3_to_usb = QUEUE_DIRECT(64, uint8_t, + usart3.producer, usart3_usb.consumer); +static struct queue const usb_to_usart3 = QUEUE_DIRECT(64, uint8_t, + usart3_usb.producer, usart3.consumer); + +static struct usart_config const usart3 = + USART_CONFIG(usart3_hw, + usart_rx_interrupt, + usart_tx_interrupt, + 115200, + usart3_to_usb, + usb_to_usart3); + +USB_STREAM_CONFIG(usart3_usb, + USB_IFACE_USART3_STREAM, + USB_STR_USART3_STREAM_NAME, + USB_EP_USART3_STREAM, + USB_STREAM_RX_SIZE, + USB_STREAM_TX_SIZE, + usb_to_usart3, + usart3_to_usb) + + +/****************************************************************************** + * Forward USART4 as a simple USB serial interface. + */ + +static struct usart_config const usart4; +struct usb_stream_config const usart4_usb; + +static struct queue const usart4_to_usb = QUEUE_DIRECT(64, uint8_t, + usart4.producer, usart4_usb.consumer); +static struct queue const usb_to_usart4 = QUEUE_DIRECT(64, uint8_t, + usart4_usb.producer, usart4.consumer); + +static struct usart_config const usart4 = + USART_CONFIG(usart4_hw, + usart_rx_interrupt, + usart_tx_interrupt, + 115200, + usart4_to_usb, + usb_to_usart4); + +USB_STREAM_CONFIG(usart4_usb, + USB_IFACE_USART4_STREAM, + USB_STR_USART4_STREAM_NAME, + USB_EP_USART4_STREAM, + USB_STREAM_RX_SIZE, + USB_STREAM_TX_SIZE, + usb_to_usart4, + usart4_to_usb) + + +/****************************************************************************** + * Define the strings used in our USB descriptors. + */ + +const void *const usb_strings[] = { + [USB_STR_DESC] = usb_string_desc, + [USB_STR_VENDOR] = USB_STRING_DESC("Google Inc."), + [USB_STR_PRODUCT] = USB_STRING_DESC("Servo Micro"), + [USB_STR_SERIALNO] = USB_STRING_DESC("1234-a"), + [USB_STR_VERSION] = USB_STRING_DESC(CROS_EC_VERSION32), + [USB_STR_USART4_STREAM_NAME] = USB_STRING_DESC("Servo UART3"), + [USB_STR_CONSOLE_NAME] = USB_STRING_DESC("Servo EC Shell"), + [USB_STR_USART3_STREAM_NAME] = USB_STRING_DESC("Servo UART2"), + [USB_STR_USART2_STREAM_NAME] = USB_STRING_DESC("Servo UART1"), +}; + +BUILD_ASSERT(ARRAY_SIZE(usb_strings) == USB_STR_COUNT); + + +/****************************************************************************** + * Support SPI bridging over USB, this requires usb_spi_board_enable and + * usb_spi_board_disable to be defined to enable and disable the SPI bridge. + */ + +/* SPI devices */ +/* Set clock divider to 7 since our SPI routing is non-optimal. */ +const struct spi_device_t spi_devices[] = { + { CONFIG_SPI_FLASH_PORT, 7, GPIO_SPI_CS}, +}; +const unsigned int spi_devices_used = ARRAY_SIZE(spi_devices); + +void usb_spi_board_enable(struct usb_spi_config const *config) +{ + /* Remap SPI2 to DMA channels 6 and 7 */ + /* STM32F072 SPI2 defaults to using DMA channels 4 and 5 */ + /* but cros_ec hardcodes a 6/7 assumption in registers.h */ + STM32_SYSCFG_CFGR1 |= (1 << 24); + + /* Configure SPI GPIOs */ + gpio_config_module(MODULE_SPI_FLASH, 1); + + /* Set all four SPI pins to high speed */ + STM32_GPIO_OSPEEDR(GPIO_B) |= 0xff000000; + + /* Enable clocks to SPI2 module */ + STM32_RCC_APB1ENR |= STM32_RCC_PB1_SPI2; + + /* Reset SPI2 */ + STM32_RCC_APB1RSTR |= STM32_RCC_PB1_SPI2; + STM32_RCC_APB1RSTR &= ~STM32_RCC_PB1_SPI2; + + spi_enable(CONFIG_SPI_FLASH_PORT, 1); +} + +void usb_spi_board_disable(struct usb_spi_config const *config) +{ + spi_enable(CONFIG_SPI_FLASH_PORT, 0); + + /* Disable clocks to SPI2 module */ + STM32_RCC_APB1ENR &= ~STM32_RCC_PB1_SPI2; + + /* Release SPI GPIOs */ + gpio_config_module(MODULE_SPI_FLASH, 0); +} + +USB_SPI_CONFIG(usb_spi, USB_IFACE_SPI, USB_EP_SPI); + + +/****************************************************************************** + * Support I2C bridging over USB, this requires usb_i2c_board_enable and + * usb_i2c_board_disable to be defined to enable and disable the SPI bridge. + */ + +/* I2C ports */ +const struct i2c_port_t i2c_ports[] = { + {"master", I2C_PORT_MASTER, 100, + GPIO_MASTER_I2C_SCL, GPIO_MASTER_I2C_SDA}, +}; +const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); + +USB_I2C_CONFIG(usb_i2c, USB_IFACE_I2C, USB_EP_I2C); + + +/****************************************************************************** + * Initialize board. + */ +static void board_init(void) +{ + /* USB to serial queues */ + queue_init(&usart2_to_usb); + queue_init(&usb_to_usart2); + queue_init(&usart3_to_usb); + queue_init(&usb_to_usart3); + queue_init(&usart4_to_usb); + queue_init(&usb_to_usart4); + + /* UART init */ + usart_init(&usart2); + usart_init(&usart3); + usart_init(&usart4); + + /* Enable GPIO expander. */ + gpio_set_level(GPIO_TCA6416_RESET_L, 1); + + /* Structured enpoints */ + usb_spi_enable(&usb_spi, 1); +} +DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT); |