diff options
Diffstat (limited to 'board/servo_micro/board.h')
-rw-r--r-- | board/servo_micro/board.h | 134 |
1 files changed, 0 insertions, 134 deletions
diff --git a/board/servo_micro/board.h b/board/servo_micro/board.h deleted file mode 100644 index 306bc0e5d7..0000000000 --- a/board/servo_micro/board.h +++ /dev/null @@ -1,134 +0,0 @@ -/* Copyright 2016 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Servo micro configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -#define CONFIG_LTO - -/* 48 MHz SYSCLK clock frequency */ -#define CPU_CLOCK 48000000 - -#define CONFIG_BOARD_PRE_INIT - -/* Enable USART1,3,4 and USB streams */ -#define CONFIG_STREAM_USART -#define CONFIG_STREAM_USART2 -#define CONFIG_STREAM_USART3 -#define CONFIG_STREAM_USART4 -#define CONFIG_STREAM_USB -#define CONFIG_CMD_USART_INFO - -/* The UART console is on USART1 (PA9/PA10) */ -#undef CONFIG_UART_CONSOLE -#define CONFIG_UART_CONSOLE 1 -#undef CONFIG_UART_TX_DMA -#undef CONFIG_UART_RX_DMA - -/* Optional features */ -#define CONFIG_STM_HWTIMER32 -#define CONFIG_HW_CRC -#define CONFIG_PVD -/* See 'Programmable voltage detector characteristics' in the STM32F072x8 Datasheet. - PVD Threshold 1 corresponds to a falling voltage threshold of min:2.09V, max:2.27V. */ -#define PVD_THRESHOLD (1) - -/* USB Configuration */ -#define CONFIG_USB -#define CONFIG_USB_PID 0x501a -#define CONFIG_USB_CONSOLE -#define CONFIG_USB_UPDATE - -#undef CONFIG_USB_MAXPOWER_MA -#define CONFIG_USB_MAXPOWER_MA 100 - -#define CONFIG_USB_SERIALNO -#define DEFAULT_SERIALNO "Uninitialized" - -/* USB interface indexes (use define rather than enum to expand them) */ -#define USB_IFACE_USART4_STREAM 0 -#define USB_IFACE_UPDATE 1 -#define USB_IFACE_SPI 2 -#define USB_IFACE_CONSOLE 3 -#define USB_IFACE_I2C 4 -#define USB_IFACE_USART3_STREAM 5 -#define USB_IFACE_USART2_STREAM 6 -#define USB_IFACE_COUNT 7 - -/* USB endpoint indexes (use define rather than enum to expand them) */ -#define USB_EP_CONTROL 0 -#define USB_EP_USART4_STREAM 1 -#define USB_EP_UPDATE 2 -#define USB_EP_SPI 3 -#define USB_EP_CONSOLE 4 -#define USB_EP_I2C 5 -#define USB_EP_USART3_STREAM 6 -#define USB_EP_USART2_STREAM 7 -#define USB_EP_COUNT 8 - -/* Enable console recasting of GPIO type. */ -#define CONFIG_CMD_GPIO_EXTENDED - -/* Enable control of SPI over USB */ -#define CONFIG_USB_SPI -#define CONFIG_SPI_CONTROLLER -#define CONFIG_SPI_FLASH_PORT 0 /* First SPI master port */ - -/* This is not actually an EC so disable some features. */ -#undef CONFIG_WATCHDOG_HELP -#undef CONFIG_LID_SWITCH - -/* Enable control of I2C over USB */ -#define CONFIG_USB_I2C -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define I2C_PORT_MASTER 0 - -/* See i2c_ite_flash_support.c for more information about these values */ -#define CONFIG_ITE_FLASH_SUPPORT -#define CONFIG_I2C_XFER_LARGE_TRANSFER -#undef CONFIG_USB_I2C_MAX_WRITE_COUNT -#undef CONFIG_USB_I2C_MAX_READ_COUNT -#define CONFIG_USB_I2C_MAX_WRITE_COUNT ((1<<9) - 4) -#define CONFIG_USB_I2C_MAX_READ_COUNT ((1<<9) - 6) - -/* - * Allow dangerous commands all the time, since we don't have a write protect - * switch. - */ -#define CONFIG_SYSTEM_UNLOCKED - -#ifndef __ASSEMBLER__ - -/* Timer selection */ -#define TIM_CLOCK32 2 - -#include "gpio_signal.h" - -/* GPIO signal mapping */ -#define GPIO_USART4_SERVO_TX_DUT_RX GPIO_UART3_TX_SERVO_JTAG_TCK -#define GPIO_USART4_SERVO_RX_DUT_TX GPIO_UART3_RX_JTAG_BUFFER_TO_SERVO_TDO - -/* USB string indexes */ -enum usb_strings { - USB_STR_DESC = 0, - USB_STR_VENDOR, - USB_STR_PRODUCT, - USB_STR_SERIALNO, - USB_STR_VERSION, - USB_STR_I2C_NAME, - USB_STR_USART4_STREAM_NAME, - USB_STR_CONSOLE_NAME, - USB_STR_USART3_STREAM_NAME, - USB_STR_USART2_STREAM_NAME, - USB_STR_UPDATE_NAME, - - USB_STR_COUNT -}; - -#endif /* !__ASSEMBLER__ */ -#endif /* __CROS_EC_BOARD_H */ |