diff options
Diffstat (limited to 'board/stryke/battery.c')
-rw-r--r-- | board/stryke/battery.c | 93 |
1 files changed, 0 insertions, 93 deletions
diff --git a/board/stryke/battery.c b/board/stryke/battery.c deleted file mode 100644 index 0144c049b5..0000000000 --- a/board/stryke/battery.c +++ /dev/null @@ -1,93 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Battery pack vendor provided charging profile - */ - -#include "battery_fuel_gauge.h" -#include "common.h" -#include "util.h" - -/* - * Battery info for all Stryke battery types. Note that the fields - * start_charging_min/max and charging_min/max are not used for the charger. - * The effective temperature limits are given by discharging_min/max_c. - * - * Fuel Gauge (FG) parameters which are used for determining if the battery - * is connected, the appropriate ship mode (battery cutoff) command, and the - * charge/discharge FETs status. - * - * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery - * register. For some batteries, the charge/discharge FET bits are set when - * charging/discharging is active, in other types, these bits set mean that - * charging/discharging is disabled. Therefore, in addition to the mask for - * these bits, a disconnect value must be specified. Note that for TI fuel - * gauge, the charge/discharge FET status is found in Operation Status (0x54), - * but a read of Manufacturer Access (0x00) will return the lower 16 bits of - * Operation status which contains the FET status bits. - * - * The assumption for battery types supported is that the charge/discharge FET - * status can be read with a sb_read() command and therefore, only the register - * address, mask, and disconnect value need to be provided. - */ -const struct board_batt_params board_battery_info[] = { - /* SMP LIS Dell FMXMT Battery Information */ - [BATTERY_SMP_LIS] = { - .fuel_gauge = { - .manuf_name = "SMP-LIS3.78", - .ship_mode = { - .reg_addr = 0x0, - .reg_data = { 0x10, 0x10 }, - }, - .fet = { - .reg_addr = 0x0, - .reg_mask = 0x2000, - .disconnect_val = 0x2000, - } - }, - .batt_info = { - .voltage_max = 8800, - .voltage_normal = 7660, /* mV */ - .voltage_min = 6000, /* mV */ - .precharge_current = 256, /* mA */ - .start_charging_min_c = 0, - .start_charging_max_c = 60, - .charging_min_c = 0, - .charging_max_c = 60, - .discharging_min_c = 0, - .discharging_max_c = 60, - }, - }, - - /* SMP SDI Dell FMXMT Battery Information */ - [BATTERY_SMP_SDI] = { - .fuel_gauge = { - .manuf_name = "SMP-SDI-3727", - .ship_mode = { - .reg_addr = 0x0, - .reg_data = { 0x10, 0x10 }, - }, - .fet = { - .reg_addr = 0x0, - .reg_mask = 0x2000, - .disconnect_val = 0x2000, - } - }, - .batt_info = { - .voltage_max = 8800, - .voltage_normal = 7660, /* mV */ - .voltage_min = 6000, /* mV */ - .precharge_current = 256, /* mA */ - .start_charging_min_c = 0, - .start_charging_max_c = 60, - .charging_min_c = 0, - .charging_max_c = 60, - .discharging_min_c = 0, - .discharging_max_c = 60, - }, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT); - -const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_SMP_SDI; |