diff options
Diffstat (limited to 'board/tigertail/board.h')
-rw-r--r-- | board/tigertail/board.h | 140 |
1 files changed, 0 insertions, 140 deletions
diff --git a/board/tigertail/board.h b/board/tigertail/board.h deleted file mode 100644 index 3b15c4c774..0000000000 --- a/board/tigertail/board.h +++ /dev/null @@ -1,140 +0,0 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Tigertail configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* 48 MHz SYSCLK clock frequency */ -#define CPU_CLOCK 48000000 - -/* Enable USART1 USB streams */ -#define CONFIG_STREAM_USART -#define CONFIG_STREAM_USART1 -#define CONFIG_STREAM_USB -#define CONFIG_CMD_USART_INFO - -/* The UART console is on USART1 (PA9/PA10) */ -#undef CONFIG_UART_CONSOLE -#define CONFIG_UART_CONSOLE 2 -#undef CONFIG_UART_TX_DMA -#undef CONFIG_UART_RX_DMA - -/* Optional features */ -#define CONFIG_STM_HWTIMER32 -#define CONFIG_HW_CRC - -/* USB Configuration */ -#define CONFIG_USB -#define CONFIG_USB_PID 0x5027 -#define CONFIG_USB_CONSOLE -#define CONFIG_USB_UPDATE - -#undef CONFIG_USB_MAXPOWER_MA -#define CONFIG_USB_MAXPOWER_MA 100 - -#define CONFIG_USB_SERIALNO -#define DEFAULT_SERIALNO "Uninitialized" - -/* USB interface indexes (use define rather than enum to expand them) */ -#define USB_IFACE_CONSOLE 0 -#define USB_IFACE_UPDATE 1 -#define USB_IFACE_USART1_STREAM 2 -#define USB_IFACE_I2C 3 -#define USB_IFACE_COUNT 4 - -/* USB endpoint indexes (use define rather than enum to expand them) */ -#define USB_EP_CONTROL 0 -#define USB_EP_CONSOLE 1 -#define USB_EP_UPDATE 2 -#define USB_EP_USART1_STREAM 3 -#define USB_EP_I2C 4 -#define USB_EP_COUNT 5 - -/* Enable console recasting of GPIO type. */ -#define CONFIG_CMD_GPIO_EXTENDED - -/* This is not actually an EC so disable some features. */ -#undef CONFIG_WATCHDOG_HELP -#undef CONFIG_LID_SWITCH - -/* Enable control of I2C over USB */ -#define CONFIG_USB_I2C -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define I2C_PORT_MASTER 0 -#define CONFIG_INA231 - -/* Enable ADC */ -#define CONFIG_ADC - -/* - * Allow dangerous commands all the time, since we don't have a write protect - * switch. - */ -#define CONFIG_SYSTEM_UNLOCKED - - -#ifndef __ASSEMBLER__ - -/* Timer selection */ -#define TIM_CLOCK32 2 -#define TIM_ADC 3 - - - -#include "gpio_signal.h" - -/* USB string indexes */ -enum usb_strings { - USB_STR_DESC = 0, - USB_STR_VENDOR, - USB_STR_PRODUCT, - USB_STR_SERIALNO, - USB_STR_VERSION, - USB_STR_I2C_NAME, - USB_STR_USART1_STREAM_NAME, - USB_STR_CONSOLE_NAME, - USB_STR_UPDATE_NAME, - - USB_STR_COUNT -}; - -/* ADC signal */ -enum adc_channel { - ADC_SBU1 = 0, - ADC_SBU2, - /* Number of ADC channels */ - ADC_CH_COUNT -}; - -void set_uart_state(int state); - -enum uart_states { - UART_OFF = 0, - UART_ON_PP1800, - UART_FLIP_PP1800, - UART_ON_PP3300, - UART_FLIP_PP3300, - UART_AUTO, -}; - -enum uart_detect_states { - UART_DETECT_OFF = 0, - UART_DETECT_AUTO, -}; - -void set_mux_state(int state); -enum mux_states { - MUX_OFF = 0, - MUX_A, - MUX_B, -}; - -void button_interrupt(enum gpio_signal signal); - -#endif /* !__ASSEMBLER__ */ -#endif /* __CROS_EC_BOARD_H */ |