diff options
Diffstat (limited to 'board/tigertail/gpio.inc')
-rw-r--r-- | board/tigertail/gpio.inc | 65 |
1 files changed, 0 insertions, 65 deletions
diff --git a/board/tigertail/gpio.inc b/board/tigertail/gpio.inc deleted file mode 100644 index 107d3b2a2e..0000000000 --- a/board/tigertail/gpio.inc +++ /dev/null @@ -1,65 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Interrupt enables. */ -GPIO_INT(BUTTON_L, PIN(C, 13), \ - GPIO_INT_RISING | GPIO_PULL_UP, button_interrupt) - -/* Outputs */ -GPIO(SEL_CC2_A, PIN(A, 14), GPIO_OUT_LOW) -GPIO(SEL_VBUS_A, PIN(A, 15), GPIO_OUT_LOW) -GPIO(SEL_CC2_B, PIN(B, 0), GPIO_OUT_LOW) -GPIO(SEL_VBUS_B, PIN(B, 1), GPIO_OUT_LOW) -GPIO(SEL_RELAY_A, PIN(B, 2), GPIO_OUT_LOW) -GPIO(SEL_RELAY_B, PIN(B, 3), GPIO_OUT_LOW) -GPIO(USB_C_SEL_B, PIN(B, 4), GPIO_OUT_LOW) -GPIO(USB_C_OE_N, PIN(B, 5), GPIO_OUT_HIGH) - -GPIO(ST_UART_LVL_DIS, PIN(B, 10), GPIO_OUT_HIGH) -GPIO(ST_UART_TX_DIR, PIN(B, 12), GPIO_OUT_HIGH) -GPIO(ST_UART_TX_DIR_N, PIN(B, 15), GPIO_OUT_LOW) -/* SBU_VSET, 1=1.8V, 0=3.3V */ -GPIO(ST_UART_VREF, PIN(B, 7), GPIO_OUT_HIGH) - -GPIO(LED2_G_L, PIN(A, 5), GPIO_OUT_HIGH) -GPIO(LED2_B_L, PIN(A, 8), GPIO_OUT_HIGH) -GPIO(LED2_R_L, PIN(A, 13), GPIO_OUT_LOW) - -GPIO(LED_G_L, PIN(B, 11), GPIO_OUT_HIGH) -GPIO(LED_R_L, PIN(B, 13), GPIO_OUT_LOW) -GPIO(LED_B_L, PIN(B, 14), GPIO_OUT_HIGH) - -/* Inputs */ -GPIO(USB_C_SBU1_DET, PIN(A, 6), GPIO_INPUT) -GPIO(USB_C_SBU2_DET, PIN(A, 7), GPIO_INPUT) - -/* USART interface */ -GPIO(USART2_CTS, PIN(A, 0), GPIO_INPUT) -GPIO(USART2_RTS, PIN(A, 1), GPIO_INPUT) -GPIO(USART2_TX, PIN(A, 2), GPIO_INPUT) -GPIO(USART2_RX, PIN(A, 3), GPIO_INPUT) -GPIO(USART2_CK, PIN(A, 4), GPIO_INPUT) - -GPIO(USART1_TX, PIN(A, 9), GPIO_INPUT) -GPIO(USART1_RX, PIN(A, 10), GPIO_INPUT) - -/* I2C pins should be configured as inputs until I2C module is */ -/* initialized. This will avoid driving the lines unintentionally.*/ -GPIO(MASTER_I2C_SCL, PIN(B, 8), GPIO_INPUT) -GPIO(MASTER_I2C_SDA, PIN(B, 9), GPIO_INPUT) - -/* Unimplemented signals since we are not an EC */ -UNIMPLEMENTED(ENTERING_RW) -UNIMPLEMENTED(WP_L) - -/* USART2: PA2/PA3 - Console UART */ -ALTERNATE(PIN_MASK(A, 0x000C), 1, MODULE_UART, 0) -/* USART1: PA09/PA10 - AP/SBU UART */ -ALTERNATE(PIN_MASK(A, 0x0600), 1, MODULE_USART, 0) - -/* I2C MASTER:PB8/9 GPIO_ODR_HIGH */ -ALTERNATE(PIN_MASK(B, 0x0300), 1, MODULE_I2C, 0) |