diff options
Diffstat (limited to 'board/trogdor/board.c')
| -rw-r--r-- | board/trogdor/board.c | 76 |
1 files changed, 0 insertions, 76 deletions
diff --git a/board/trogdor/board.c b/board/trogdor/board.c index 5dc0898072..45621582b8 100644 --- a/board/trogdor/board.c +++ b/board/trogdor/board.c @@ -9,11 +9,8 @@ #include "button.h" #include "charge_manager.h" #include "charge_state.h" -#include "charger.h" -#include "chipset.h" #include "extpower.h" #include "driver/accelgyro_bmi160.h" -#include "driver/charger/isl923x.h" #include "driver/ppc/sn5s330.h" #include "driver/tcpm/ps8xxx.h" #include "driver/tcpm/tcpci.h" @@ -33,11 +30,7 @@ #include "shi_chip.h" #include "switch.h" #include "task.h" -#include "usb_charge.h" -#include "usb_mux.h" -#include "usb_pd.h" #include "usbc_ppc.h" -#include "util.h" #define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args) #define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args) @@ -109,15 +102,6 @@ static void board_connect_c0_sbu(enum gpio_signal s) hook_call_deferred(&board_connect_c0_sbu_deferred_data, 0); } -/* Wake-up pins for hibernate */ -const enum gpio_signal hibernate_wake_pins[] = { - GPIO_LID_OPEN, - GPIO_AC_PRESENT, - GPIO_POWER_BUTTON_L, - GPIO_EC_RST_ODL, -}; -const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); - /* ADC channels */ const struct adc_t adc_channels[] = { /* Measure VBUS through a 1/10 voltage divider */ @@ -162,56 +146,6 @@ const struct pwm_t pwm_channels[] = { }; BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); - -/* Power signal list. Must match order of enum power_signal. */ -const struct power_signal_info power_signal_list[] = { - [SC7180_AP_RST_ASSERTED] = { - GPIO_AP_RST_L, - POWER_SIGNAL_ACTIVE_LOW | POWER_SIGNAL_DISABLE_AT_BOOT, - "AP_RST_ASSERTED"}, - [SC7180_PS_HOLD] = { - GPIO_PS_HOLD, - POWER_SIGNAL_ACTIVE_HIGH, - "PS_HOLD"}, - [SC7180_PMIC_FAULT_L] = { - GPIO_PMIC_FAULT_L, - POWER_SIGNAL_ACTIVE_HIGH | POWER_SIGNAL_DISABLE_AT_BOOT, - "PMIC_FAULT_L"}, - [SC7180_POWER_GOOD] = { - GPIO_POWER_GOOD, - POWER_SIGNAL_ACTIVE_HIGH, - "POWER_GOOD"}, - [SC7180_WARM_RESET] = { - GPIO_WARM_RESET_L, - POWER_SIGNAL_ACTIVE_HIGH, - "WARM_RESET_L"}, - [SC7180_AP_SUSPEND] = { - GPIO_AP_SUSPEND, - POWER_SIGNAL_ACTIVE_HIGH, - "AP_SUSPEND"}, - [SC7180_DEPRECATED_AP_RST_REQ] = { - GPIO_DEPRECATED_AP_RST_REQ, - POWER_SIGNAL_ACTIVE_HIGH, - "DEPRECATED_AP_RST_REQ"}, -}; -BUILD_ASSERT(ARRAY_SIZE(power_signal_list) == POWER_SIGNAL_COUNT); - -/* I2C port map */ -const struct i2c_port_t i2c_ports[] = { - {"power", I2C_PORT_POWER, 100, GPIO_EC_I2C_POWER_SCL, - GPIO_EC_I2C_POWER_SDA}, - {"tcpc0", I2C_PORT_TCPC0, 1000, GPIO_EC_I2C_USB_C0_PD_SCL, - GPIO_EC_I2C_USB_C0_PD_SDA}, - {"tcpc1", I2C_PORT_TCPC1, 1000, GPIO_EC_I2C_USB_C1_PD_SCL, - GPIO_EC_I2C_USB_C1_PD_SDA}, - {"eeprom", I2C_PORT_EEPROM, 400, GPIO_EC_I2C_EEPROM_SCL, - GPIO_EC_I2C_EEPROM_SDA}, - {"sensor", I2C_PORT_SENSOR, 400, GPIO_EC_I2C_SENSOR_SCL, - GPIO_EC_I2C_SENSOR_SDA}, -}; - -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - /* Power Path Controller */ struct ppc_config_t ppc_chips[] = { { @@ -296,16 +230,6 @@ BUILD_ASSERT(ARRAY_SIZE(pi3usb9281_chips) == CONFIG_BC12_DETECT_PI3USB9281_CHIP_COUNT); #endif /* BOARD_REV */ -const struct charger_config_t chg_chips[] = { - { - .i2c_port = I2C_PORT_CHARGER, - .i2c_addr_flags = ISL923X_ADDR_FLAGS, - .drv = &isl923x_drv, - }, -}; - -const unsigned int chg_cnt = ARRAY_SIZE(chg_chips); - /* Initialize board. */ static void board_init(void) { |