summaryrefslogtreecommitdiff
path: root/board/trondo/board.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/trondo/board.c')
-rw-r--r--board/trondo/board.c52
1 files changed, 52 insertions, 0 deletions
diff --git a/board/trondo/board.c b/board/trondo/board.c
index de229342cf..58c74283e4 100644
--- a/board/trondo/board.c
+++ b/board/trondo/board.c
@@ -136,6 +136,58 @@ const struct fan_t fans[FAN_CH_COUNT] = {
};
/******************************************************************************/
+/* EC thermal management configuration */
+
+/*
+ * Tiger Lake specifies 100 C as maximum TDP temperature. THRMTRIP# occurs at
+ * 130 C. However, sensor is located next to DDR, so we need to use the lower
+ * DDR temperature limit (85 C)
+ */
+const static struct ec_thermal_config thermal_cpu = {
+ .temp_host = {
+ [EC_TEMP_THRESH_HIGH] = C_TO_K(70),
+ [EC_TEMP_THRESH_HALT] = C_TO_K(80),
+ },
+ .temp_host_release = {
+ [EC_TEMP_THRESH_HIGH] = C_TO_K(65),
+ },
+ .temp_fan_off = C_TO_K(35),
+ .temp_fan_max = C_TO_K(50),
+};
+
+/*
+ * Inductor limits - used for both charger and PP3300 regulator
+ *
+ * Need to use the lower of the charger IC, PP3300 regulator, and the inductors
+ *
+ * Charger max recommended temperature 100C, max absolute temperature 125C
+ * PP3300 regulator: operating range -40 C to 145 C
+ *
+ * Inductors: limit of 125c
+ * PCB: limit is 80c
+ */
+const static struct ec_thermal_config thermal_inductor = {
+ .temp_host = {
+ [EC_TEMP_THRESH_HIGH] = C_TO_K(75),
+ [EC_TEMP_THRESH_HALT] = C_TO_K(80),
+ },
+ .temp_host_release = {
+ [EC_TEMP_THRESH_HIGH] = C_TO_K(65),
+ },
+ .temp_fan_off = C_TO_K(40),
+ .temp_fan_max = C_TO_K(55),
+};
+
+
+struct ec_thermal_config thermal_params[] = {
+ [TEMP_SENSOR_1_CHARGER] = thermal_inductor,
+ [TEMP_SENSOR_2_PP3300_REGULATOR] = thermal_inductor,
+ [TEMP_SENSOR_3_DDR_SOC] = thermal_cpu,
+ [TEMP_SENSOR_4_FAN] = thermal_cpu,
+};
+BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT);
+
+/******************************************************************************/
/* MFT channels. These are logically separate from pwm_channels. */
const struct mft_t mft_channels[] = {
[MFT_CH_0] = {