diff options
Diffstat (limited to 'board/twinkie/board.h')
-rw-r--r-- | board/twinkie/board.h | 149 |
1 files changed, 0 insertions, 149 deletions
diff --git a/board/twinkie/board.h b/board/twinkie/board.h deleted file mode 100644 index 3d601ee979..0000000000 --- a/board/twinkie/board.h +++ /dev/null @@ -1,149 +0,0 @@ -/* Copyright 2014 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Twinkie dongle configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* 48 MHz SYSCLK clock frequency */ -#define CPU_CLOCK 48000000 - -/* the UART console is on USART1 (PA9/PA10) */ -#define CONFIG_UART_CONSOLE 1 - -/* Optional features */ -#define CONFIG_USB -#define CONFIG_USB_BOS -#define CONFIG_USB_CONSOLE -#define CONFIG_WEBUSB_URL "storage.googleapis.com/webtwinkie.org/tool.html" - -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_TCPMV1 -#define CONFIG_USB_PD_CUSTOM_PDO -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_INTERNAL_COMP -#define CONFIG_USB_PD_PORT_MAX_COUNT 1 -#define CONFIG_USB_PD_TCPC -#define CONFIG_USB_PD_TCPM_STUB -#define CONFIG_USB_PD_VBUS_DETECT_GPIO -#define CONFIG_PD_USE_DAC_AS_REF -#define CONFIG_HW_CRC - -#ifndef HAS_TASK_PD_C0 /* PD sniffer mode */ -#undef CONFIG_DMA_DEFAULT_HANDLERS -#define CONFIG_USB_PD_TX_PHY_ONLY -/* override the comparator interrupt handler */ -#undef CONFIG_USB_PD_RX_COMP_IRQ -#endif - -#define CONFIG_ADC -#define CONFIG_BOARD_PRE_INIT -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define CONFIG_INA231 -#undef CONFIG_WATCHDOG_HELP -#undef CONFIG_LID_SWITCH -#undef CONFIG_TASK_PROFILING - -/* I2C ports configuration */ -#define I2C_PORT_MASTER 0 - -/* USB configuration */ -#define CONFIG_USB_PID 0x500A -/* By default, enable all console messages excepted USB */ -#define CC_DEFAULT (CC_ALL & ~CC_MASK(CC_USB)) - -/* - * Allow dangerous commands all the time, since we don't have a write protect - * switch. - */ -#define CONFIG_SYSTEM_UNLOCKED - -#ifndef __ASSEMBLER__ - -#include <stdint.h> - -void sniffer_init(void); - -int wait_packet(int pol, uint32_t min_edges, uint32_t timeout_us); - -int expect_packet(int pol, uint8_t cmd, uint32_t timeout_us); - -uint8_t recording_enable(uint8_t mask); - -void trace_packets(void); - -void set_trace_mode(int mode); - -/* Timer selection */ -#define TIM_CLOCK_MSB 3 -#define TIM_CLOCK_LSB 15 -#define TIM_ADC 16 - -#include "gpio_signal.h" - -/* ADC signal */ -enum adc_channel { - ADC_CH_CC1_PD = 0, - ADC_CH_CC2_PD, - /* Number of ADC channels */ - ADC_CH_COUNT -}; - -/* USB string indexes */ -enum usb_strings { - USB_STR_DESC = 0, - USB_STR_VENDOR, - USB_STR_PRODUCT, - USB_STR_VERSION, - USB_STR_SNIFFER, - USB_STR_CONSOLE_NAME, - - USB_STR_COUNT -}; - -/* Standard-current Rp */ -#define PD_SRC_VNC PD_SRC_DEF_VNC_MV -#define PD_SRC_RD_THRESHOLD PD_SRC_DEF_RD_THRESH_MV - -/* delay necessary for the voltage transition on the power supply */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 50000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 50000 /* us */ - -/* Define typical operating power and max power */ -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 60000 -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_VOLTAGE_MV 20000 - -#endif /* !__ASSEMBLER__ */ - -/* USB interface indexes (use define rather than enum to expand them) */ -#define USB_IFACE_CONSOLE 0 -#define USB_IFACE_VENDOR 1 - -/* USB endpoint indexes (use define rather than enum to expand them) */ -#define USB_EP_CONTROL 0 -#define USB_EP_CONSOLE 1 - -/* - * Endpoint 2 is missing because the console used to use two bidirectional - * endpoints. It now uses a single bidirectional endpoint relying on the - * direction bit as an additional bit identifying the endpoint used. It is - * safe to reallocate endpoint 2 in the future. - */ - -#ifdef HAS_TASK_SNIFFER -#define USB_EP_SNIFFER 3 -#define USB_EP_COUNT 4 -#define USB_IFACE_COUNT 2 -#else -#define USB_EP_COUNT 2 -/* No IFACE_VENDOR for the sniffer */ -#define USB_IFACE_COUNT 1 -#endif - -#endif /* __CROS_EC_BOARD_H */ |