diff options
Diffstat (limited to 'board/zinger/usb_pd_config.h')
| -rw-r--r-- | board/zinger/usb_pd_config.h | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/board/zinger/usb_pd_config.h b/board/zinger/usb_pd_config.h index fbe24e0003..2a7e0e7f7d 100644 --- a/board/zinger/usb_pd_config.h +++ b/board/zinger/usb_pd_config.h @@ -47,7 +47,7 @@ static inline void spi_enable_clock(int port) #define TIM_RX_CCR_IDX(p) TIM_RX_CCR_C0 /* connect TIM3 CH1 to TIM3_CH2 input */ #define TIM_CCR_CS 2 -#define EXTI_COMP_MASK(p) (1 << 7) +#define EXTI_COMP_MASK(p) BIT(7) #define IRQ_COMP STM32_IRQ_EXTI4_15 /* the RX is inverted, triggers on rising edge */ #define EXTI_XTSR STM32_EXTI_RTSR @@ -64,8 +64,8 @@ static inline void pd_set_pins_speed(int port) static inline void pd_tx_spi_reset(int port) { /* Reset SPI1 */ - STM32_RCC_APB2RSTR |= (1 << 12); - STM32_RCC_APB2RSTR &= ~(1 << 12); + STM32_RCC_APB2RSTR |= BIT(12); + STM32_RCC_APB2RSTR &= ~BIT(12); } /* Drive the CC line from the TX block */ @@ -81,7 +81,7 @@ static inline void pd_tx_enable(int port, int polarity) static inline void pd_tx_disable(int port, int polarity) { /* Put TX GND (PA4) in Hi-Z state */ - STM32_GPIO_BSRR(GPIO_A) = 1 << 4 /* Set */; + STM32_GPIO_BSRR(GPIO_A) = BIT(4) /* Set */; /* Put SPI MISO (PA6) in Hi-Z by putting it in input mode */ STM32_GPIO_MODER(GPIO_A) &= ~(0x3 << (2*6)); } |