diff options
Diffstat (limited to 'board')
-rw-r--r-- | board/felwinter/generated-gpio.inc | 124 | ||||
-rw-r--r-- | board/felwinter/gpio.inc | 132 |
2 files changed, 120 insertions, 136 deletions
diff --git a/board/felwinter/generated-gpio.inc b/board/felwinter/generated-gpio.inc deleted file mode 100644 index 4daa60c5c9..0000000000 --- a/board/felwinter/generated-gpio.inc +++ /dev/null @@ -1,124 +0,0 @@ -/* - * This file was auto-generated. - */ - -/* INTERRUPT GPIOs: */ -GPIO_INT(ACOK_OD, PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, extpower_interrupt) -GPIO_INT(EC_ACCEL_INT_R_L, PIN(8, 1), GPIO_SEL_1P8V | GPIO_INT_FALLING, lis2dw12_interrupt) -GPIO_INT(EC_ALS_RGB_INT_R_L, PIN(D, 4), GPIO_INT_FALLING, tcs3400_interrupt) -GPIO_INT(EC_IMU_INT_R_L, PIN(5, 6), GPIO_SEL_1P8V | GPIO_INT_FALLING, lsm6dso_interrupt) -GPIO_INT(EC_PROCHOT_IN_L, PIN(F, 0), GPIO_INT_BOTH, throttle_ap_prochot_input_interrupt) -GPIO_INT(EC_VOLDN_BTN_ODL, PIN(9, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) -GPIO_INT(EC_VOLUP_BTN_ODL, PIN(9, 7), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) -GPIO_INT(EC_WP_ODL, PIN(A, 1), GPIO_INT_BOTH, switch_interrupt) -GPIO_INT(GSC_EC_PWR_BTN_ODL, PIN(0, 1), GPIO_INT_BOTH | GPIO_HIB_WAKE_LOW, power_button_interrupt) -GPIO_INT(LID_OPEN, PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, lid_interrupt) -GPIO_INT(SEQ_EC_ALL_SYS_PG, PIN(F, 4), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(SEQ_EC_DSW_PWROK, PIN(C, 7), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(SEQ_EC_RSMRST_ODL, PIN(E, 2), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(SLP_S3_L, PIN(A, 5), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(SLP_SUS_L, PIN(F, 1), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(SYS_SLP_S0IX_L, PIN(D, 5), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(TABLET_MODE_L, PIN(9, 5), GPIO_INT_BOTH, gmr_tablet_switch_isr) -GPIO_INT(USB_C0_BC12_INT_ODL, PIN(C, 6), GPIO_INT_FALLING, bc12_interrupt) -GPIO_INT(USB_C0_C2_TCPC_INT_ODL, PIN(E, 0), GPIO_INT_FALLING, tcpc_alert_event) -GPIO_INT(USB_C0_PPC_INT_ODL, PIN(6, 2), GPIO_INT_FALLING, ppc_interrupt) -GPIO_INT(USB_C0_RT_INT_ODL, PIN(B, 1), GPIO_INT_FALLING, retimer_interrupt) -GPIO_INT(USB_C1_BC12_INT_ODL, PIN(5, 0), GPIO_INT_FALLING, bc12_interrupt) -GPIO_INT(USB_C1_PPC_INT_ODL, PIN(F, 5), GPIO_INT_FALLING, ppc_interrupt) -GPIO_INT(USB_C1_TCPC_INT_ODL, PIN(A, 2), GPIO_INT_FALLING, tcpc_alert_event) -GPIO_INT(USB_C2_BC12_INT_ODL, PIN(8, 3), GPIO_INT_FALLING, bc12_interrupt) -GPIO_INT(USB_C2_PPC_INT_ODL, PIN(7, 0), GPIO_INT_FALLING, ppc_interrupt) -GPIO_INT(USB_C2_RT_INT_ODL, PIN(4, 1), GPIO_INT_FALLING, retimer_interrupt) - -/* USED GPIOs: */ -GPIO(CCD_MODE_ODL, PIN(E, 5), GPIO_INPUT) -GPIO(CHARGER_VAP_OTG_EN, PIN(7, 3), GPIO_OUT_LOW) -GPIO(CPU_C10_GATE_L, PIN(6, 7), GPIO_INPUT) -GPIO(EC_BATT_PRES_ODL, PIN(A, 3), GPIO_INPUT) -GPIO(EC_ENTERING_RW, PIN(0, 3), GPIO_OUT_LOW) -GPIO(EC_EN_EDP_BL, PIN(D, 3), GPIO_OUT_HIGH) -GPIO(EC_GSC_PACKET_MODE, PIN(7, 5), GPIO_OUT_LOW) -GPIO(EC_I2C_BAT_SCL, PIN(3, 3), GPIO_INPUT) -GPIO(EC_I2C_BAT_SDA, PIN(3, 6), GPIO_INPUT) -GPIO(EC_I2C_MISC_SCL_R, PIN(B, 3), GPIO_INPUT) -GPIO(EC_I2C_MISC_SDA_R, PIN(B, 2), GPIO_INPUT) -GPIO(EC_I2C_SENSOR_SCL, PIN(B, 5), GPIO_INPUT | GPIO_SEL_1P8V) -GPIO(EC_I2C_SENSOR_SDA, PIN(B, 4), GPIO_INPUT | GPIO_SEL_1P8V) -GPIO(EC_I2C_USB_C0_C2_PPC_BC_SCL, PIN(9, 2), GPIO_INPUT) -GPIO(EC_I2C_USB_C0_C2_PPC_BC_SDA, PIN(9, 1), GPIO_INPUT) -GPIO(EC_I2C_USB_C0_C2_RT_SCL, PIN(D, 1), GPIO_INPUT) -GPIO(EC_I2C_USB_C0_C2_RT_SDA, PIN(D, 0), GPIO_INPUT) -GPIO(EC_I2C_USB_C0_C2_TCPC_SCL, PIN(9, 0), GPIO_INPUT) -GPIO(EC_I2C_USB_C0_C2_TCPC_SDA, PIN(8, 7), GPIO_INPUT) -GPIO(EC_I2C_USB_C1_MIX_SCL, PIN(E, 4), GPIO_INPUT) -GPIO(EC_I2C_USB_C1_MIX_SDA, PIN(E, 3), GPIO_INPUT) -GPIO(EC_I2C_USB_C1_TCPC_SCL, PIN(F, 3), GPIO_INPUT) -GPIO(EC_I2C_USB_C1_TCPC_SDA, PIN(F, 2), GPIO_INPUT) -GPIO(EC_KB_BL_EN_L, PIN(8, 6), GPIO_OUT_HIGH) -GPIO(EC_PCHHOT_ODL, PIN(7, 4), GPIO_INPUT) -GPIO(EC_PCH_INT_ODL, PIN(B, 0), GPIO_ODR_HIGH) -GPIO(EC_PCH_PWR_BTN_ODL, PIN(C, 1), GPIO_ODR_HIGH) -GPIO(EC_PCH_RSMRST_L, PIN(A, 6), GPIO_OUT_LOW) -GPIO(EC_PCH_RTCRST, PIN(7, 6), GPIO_OUT_LOW) -GPIO(EC_PCH_SYS_PWROK, PIN(3, 7), GPIO_OUT_LOW) -GPIO(EC_PCH_WAKE_R_ODL, PIN(C, 0), GPIO_ODR_HIGH) -GPIO(EC_PROCHOT_ODL, PIN(6, 3), GPIO_ODR_HIGH) -GPIO(EN_PP5000_FAN, PIN(6, 1), GPIO_OUT_HIGH) -GPIO(EN_PP5000_USBA_R, PIN(D, 7), GPIO_OUT_LOW) -GPIO(EN_S5_RAILS, PIN(B, 6), GPIO_OUT_LOW) -GPIO(IMVP9_VRRDY_OD, PIN(4, 3), GPIO_INPUT) -GPIO(PCH_PWROK, PIN(7, 2), GPIO_OUT_LOW) -GPIO(SYS_RST_ODL, PIN(C, 5), GPIO_ODR_HIGH) -GPIO(USB_C0_C2_TCPC_RST_ODL, PIN(A, 7), GPIO_ODR_LOW) -GPIO(USB_C1_FRS_EN, PIN(9, 4), GPIO_OUT_LOW) -GPIO(USB_C1_RST_ODL, PIN(9, 6), GPIO_ODR_LOW) -GPIO(USB_C1_RT_INT_ODL, PIN(A, 0), GPIO_INPUT) -GPIO(USB_C1_RT_RST_R_ODL, PIN(0, 2), GPIO_ODR_LOW) -GPIO(VCCST_PWRGD_OD, PIN(A, 4), GPIO_ODR_LOW) - -/* UART alternate functions */ -ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0) /* GPIO64/CR_SIN1, GPO65/CR_SOUT1/FLPRG1_L */ - -/* I2C alternate functions */ -ALTERNATE(PIN_MASK(3, 0x48), 0, MODULE_I2C, 0) /* GPIO33/I2C5_SCL0/CTS_L, GPIO36/RTS_L/I2C5_SDA0 */ -ALTERNATE(PIN_MASK(8, 0x80), 0, MODULE_I2C, 0) /* GPIO87/I2C1_SDA0 */ -ALTERNATE(PIN_MASK(9, 0x07), 0, MODULE_I2C, 0) /* GPIO92/I2C2_SCL0, GPIO91/I2C2_SDA0, GPIO90/I2C1_SCL0 */ -ALTERNATE(PIN_MASK(B, 0x0c), 0, MODULE_I2C, 0) /* GPIOB3/I2C7_SCL0/DCD_L, GPIOB2/I2C7_SDA0/DSR_L */ -ALTERNATE(PIN_MASK(B, 0x30), 0, MODULE_I2C, GPIO_SEL_1P8V) /* GPIOB5/I2C0_SCL0, GPIOB4/I2C0_SDA0 */ -ALTERNATE(PIN_MASK(D, 0x03), 0, MODULE_I2C, 0) /* GPIOD1/I2C3_SCL0, GPIOD0/I2C3_SDA0 */ -ALTERNATE(PIN_MASK(E, 0x18), 0, MODULE_I2C, 0) /* GPIOE4/I2C6_SCL1/I3C_SCL, GPIOE3/I2C6_SDA1/I3C_SDA */ -ALTERNATE(PIN_MASK(F, 0x0c), 0, MODULE_I2C, 0) /* GPIOF3/I2C4_SCL1, GPIOF2/I2C4_SDA1 */ - -/* PWM alternate functions */ -ALTERNATE(PIN_MASK(4, 0x01), 0, MODULE_PWM, 0) /* GPIO40/TA1 */ -ALTERNATE(PIN_MASK(6, 0x01), 0, MODULE_PWM, 0) /* GPIO60/PWM7 */ -ALTERNATE(PIN_MASK(8, 0x01), 0, MODULE_PWM, 0) /* GPIO80/PWM3 */ -ALTERNATE(PIN_MASK(B, 0x80), 0, MODULE_PWM, 0) /* GPIOB7/PWM5 */ -ALTERNATE(PIN_MASK(C, 0x1c), 0, MODULE_PWM, 0) /* GPIOC4/PWM2, GPIOC3/PWM0, GPIOC2/PWM1/I2C6_SCL0 */ - -/* ADC alternate functions */ -ALTERNATE(PIN_MASK(3, 0x10), 0, MODULE_ADC, 0) /* GPIO34/PS2_DAT2/ADC6 */ -ALTERNATE(PIN_MASK(4, 0x34), 0, MODULE_ADC, 0) /* GPIO42/ADC3/RI_L, GPIO45/ADC0, GPIO44/ADC1 */ -ALTERNATE(PIN_MASK(E, 0x02), 0, MODULE_ADC, 0) /* GPIOE1/ADC7 */ - -/* KB alternate functions */ -ALTERNATE(PIN_MASK(0, 0xf0), 0, MODULE_KB, GPIO_ODR_HIGH) /* KSO10&P80_CLK/GPIO07, KSO11&P80_DAT/GPIO06, KSO12/GPIO05, KSO13/GPIO04 */ -ALTERNATE(PIN_MASK(1, 0x7f), 0, MODULE_KB, GPIO_ODR_HIGH) /* KSO06/GPO13/GP_SEL_L, KSO07/GPO12/JEN_L, KSO03/GPIO16/JTAG_TDO0_SWO, KSO04/GPIO15/XNOR, KSO05/GPIO14, KSO08/GPIO11/CR_SOUT1, KSO09/GPIO10/CR_SIN1 */ -ALTERNATE(PIN_MASK(2, 0xfc), 0, MODULE_KB, GPIO_INPUT | GPIO_PULL_UP) /* KSI2/GPIO27/TRACEDATA1, KSI3/GPIO26/TRACEDATA0, KSI4/GPIO25/TRACECLK/GP_SCLK, KSI5/GPIO24/GP_MISO, KSI6/GPIO23/S_SBUB, KSI7/GPIO22/S_SBUA */ -ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KB, GPIO_ODR_HIGH) /* KSO00/GPIO21/JTAG_TCK_SWCLK, KSO01/GPIO20/JTAG_TMS_SWIO */ -ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KB, GPIO_INPUT | GPIO_PULL_UP) /* KSI0/GPIO31/TRACEDATA3/GP_MOSI, KSI1/GPIO30/TRACEDATA2/GP_CS_L */ -ALTERNATE(PIN_MASK(8, 0x04), 0, MODULE_KB, GPIO_ODR_HIGH) /* KSO14/GPIO82 */ - -/* PMU alternate functions */ -ALTERNATE(PIN_MASK(0, 0x01), 0, MODULE_PMU, GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH) /* PSL_IN2_L&GPI00/GPIO00 */ -ALTERNATE(PIN_MASK(0, 0x02), 0, MODULE_PMU, GPIO_INT_BOTH | GPIO_HIB_WAKE_LOW) /* GPIO01/PSL_IN3_L&GPI01 */ -ALTERNATE(PIN_MASK(D, 0x04), 0, MODULE_PMU, GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH) /* PSL_IN1_L&GPID2/GPIOD2 */ - -/* Unused Pins */ -UNUSED(PIN(D, 6)) /* GPOD6/CR_SOUT3/SHDF_ESPI_L */ -UNUSED(PIN(3, 2)) /* GPO32/TRIS_L */ -UNUSED(PIN(3, 5)) /* GPO35/CR_SOUT4/TEST_L */ -UNUSED(PIN(6, 6)) /* GPIO66 */ - -/* Pre-configured PSL balls: J8 K6 */ diff --git a/board/felwinter/gpio.inc b/board/felwinter/gpio.inc index 79a97b0475..1cd6e9919a 100644 --- a/board/felwinter/gpio.inc +++ b/board/felwinter/gpio.inc @@ -7,19 +7,127 @@ #define MODULE_KB MODULE_KEYBOARD_SCAN -/* - * Generated-gpio.inc is produced using a Brya specific tool that - * parses the GPIO definitions derived from the board schematics and - * EC pinout descriptions derived form the chip datasheets to generate - * the Chrome EC GPIO pinout definitions. Due to the confidential - * nature of schematics and datasheets, they are not provided here. - * - * Variants that do not auto-generate their GPIO definitions should - * combine the Brya gpio.inc and generated-gpio.inc into their - * gpio.inc and customize as appropriate. - */ +/* INTERRUPT GPIOs: */ +GPIO_INT(ACOK_OD, PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, extpower_interrupt) +GPIO_INT(EC_ACCEL_INT_R_L, PIN(8, 1), GPIO_SEL_1P8V | GPIO_INT_FALLING, lis2dw12_interrupt) +GPIO_INT(EC_ALS_RGB_INT_R_L, PIN(D, 4), GPIO_INT_FALLING, tcs3400_interrupt) +GPIO_INT(EC_IMU_INT_R_L, PIN(5, 6), GPIO_SEL_1P8V | GPIO_INT_FALLING, lsm6dso_interrupt) +GPIO_INT(EC_PROCHOT_IN_L, PIN(F, 0), GPIO_INT_BOTH, throttle_ap_prochot_input_interrupt) +GPIO_INT(EC_VOLDN_BTN_ODL, PIN(9, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) +GPIO_INT(EC_VOLUP_BTN_ODL, PIN(9, 7), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) +GPIO_INT(EC_WP_ODL, PIN(A, 1), GPIO_INT_BOTH, switch_interrupt) +GPIO_INT(GSC_EC_PWR_BTN_ODL, PIN(0, 1), GPIO_INT_BOTH | GPIO_HIB_WAKE_LOW, power_button_interrupt) +GPIO_INT(LID_OPEN, PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, lid_interrupt) +GPIO_INT(SEQ_EC_ALL_SYS_PG, PIN(F, 4), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(SEQ_EC_DSW_PWROK, PIN(C, 7), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(SEQ_EC_RSMRST_ODL, PIN(E, 2), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(SLP_S3_L, PIN(A, 5), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(SLP_SUS_L, PIN(F, 1), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(SYS_SLP_S0IX_L, PIN(D, 5), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(TABLET_MODE_L, PIN(9, 5), GPIO_INT_BOTH, gmr_tablet_switch_isr) +GPIO_INT(USB_C0_BC12_INT_ODL, PIN(C, 6), GPIO_INT_FALLING, bc12_interrupt) +GPIO_INT(USB_C0_C2_TCPC_INT_ODL, PIN(E, 0), GPIO_INT_FALLING, tcpc_alert_event) +GPIO_INT(USB_C0_PPC_INT_ODL, PIN(6, 2), GPIO_INT_FALLING, ppc_interrupt) +GPIO_INT(USB_C0_RT_INT_ODL, PIN(B, 1), GPIO_INT_FALLING, retimer_interrupt) +GPIO_INT(USB_C1_BC12_INT_ODL, PIN(5, 0), GPIO_INT_FALLING, bc12_interrupt) +GPIO_INT(USB_C1_PPC_INT_ODL, PIN(F, 5), GPIO_INT_FALLING, ppc_interrupt) +GPIO_INT(USB_C1_TCPC_INT_ODL, PIN(A, 2), GPIO_INT_FALLING, tcpc_alert_event) +GPIO_INT(USB_C2_BC12_INT_ODL, PIN(8, 3), GPIO_INT_FALLING, bc12_interrupt) +GPIO_INT(USB_C2_PPC_INT_ODL, PIN(7, 0), GPIO_INT_FALLING, ppc_interrupt) +GPIO_INT(USB_C2_RT_INT_ODL, PIN(4, 1), GPIO_INT_FALLING, retimer_interrupt) + +/* USED GPIOs: */ +GPIO(CCD_MODE_ODL, PIN(E, 5), GPIO_INPUT) +GPIO(CHARGER_VAP_OTG_EN, PIN(7, 3), GPIO_OUT_LOW) +GPIO(CPU_C10_GATE_L, PIN(6, 7), GPIO_INPUT) +GPIO(EC_BATT_PRES_ODL, PIN(A, 3), GPIO_INPUT) +GPIO(EC_ENTERING_RW, PIN(0, 3), GPIO_OUT_LOW) +GPIO(EC_EN_EDP_BL, PIN(D, 3), GPIO_OUT_HIGH) +GPIO(EC_GSC_PACKET_MODE, PIN(7, 5), GPIO_OUT_LOW) +GPIO(EC_I2C_BAT_SCL, PIN(3, 3), GPIO_INPUT) +GPIO(EC_I2C_BAT_SDA, PIN(3, 6), GPIO_INPUT) +GPIO(EC_I2C_MISC_SCL_R, PIN(B, 3), GPIO_INPUT) +GPIO(EC_I2C_MISC_SDA_R, PIN(B, 2), GPIO_INPUT) +GPIO(EC_I2C_SENSOR_SCL, PIN(B, 5), GPIO_INPUT | GPIO_SEL_1P8V) +GPIO(EC_I2C_SENSOR_SDA, PIN(B, 4), GPIO_INPUT | GPIO_SEL_1P8V) +GPIO(EC_I2C_USB_C0_C2_PPC_BC_SCL, PIN(9, 2), GPIO_INPUT) +GPIO(EC_I2C_USB_C0_C2_PPC_BC_SDA, PIN(9, 1), GPIO_INPUT) +GPIO(EC_I2C_USB_C0_C2_RT_SCL, PIN(D, 1), GPIO_INPUT) +GPIO(EC_I2C_USB_C0_C2_RT_SDA, PIN(D, 0), GPIO_INPUT) +GPIO(EC_I2C_USB_C0_C2_TCPC_SCL, PIN(9, 0), GPIO_INPUT) +GPIO(EC_I2C_USB_C0_C2_TCPC_SDA, PIN(8, 7), GPIO_INPUT) +GPIO(EC_I2C_USB_C1_MIX_SCL, PIN(E, 4), GPIO_INPUT) +GPIO(EC_I2C_USB_C1_MIX_SDA, PIN(E, 3), GPIO_INPUT) +GPIO(EC_I2C_USB_C1_TCPC_SCL, PIN(F, 3), GPIO_INPUT) +GPIO(EC_I2C_USB_C1_TCPC_SDA, PIN(F, 2), GPIO_INPUT) +GPIO(EC_KB_BL_EN_L, PIN(8, 6), GPIO_OUT_HIGH) +GPIO(EC_PCHHOT_ODL, PIN(7, 4), GPIO_INPUT) +GPIO(EC_PCH_INT_ODL, PIN(B, 0), GPIO_ODR_HIGH) +GPIO(EC_PCH_PWR_BTN_ODL, PIN(C, 1), GPIO_ODR_HIGH) +GPIO(EC_PCH_RSMRST_L, PIN(A, 6), GPIO_OUT_LOW) +GPIO(EC_PCH_RTCRST, PIN(7, 6), GPIO_OUT_LOW) +GPIO(EC_PCH_SYS_PWROK, PIN(3, 7), GPIO_OUT_LOW) +GPIO(EC_PCH_WAKE_R_ODL, PIN(C, 0), GPIO_ODR_HIGH) +GPIO(EC_PROCHOT_ODL, PIN(6, 3), GPIO_ODR_HIGH) +GPIO(EN_PP5000_FAN, PIN(6, 1), GPIO_OUT_HIGH) +GPIO(EN_PP5000_USBA_R, PIN(D, 7), GPIO_OUT_LOW) +GPIO(EN_S5_RAILS, PIN(B, 6), GPIO_OUT_LOW) +GPIO(IMVP9_VRRDY_OD, PIN(4, 3), GPIO_INPUT) +GPIO(PCH_PWROK, PIN(7, 2), GPIO_OUT_LOW) +GPIO(SYS_RST_ODL, PIN(C, 5), GPIO_ODR_HIGH) +GPIO(USB_C0_C2_TCPC_RST_ODL, PIN(A, 7), GPIO_ODR_LOW) +GPIO(USB_C1_FRS_EN, PIN(9, 4), GPIO_OUT_LOW) +GPIO(USB_C1_RST_ODL, PIN(9, 6), GPIO_ODR_LOW) +GPIO(USB_C1_RT_INT_ODL, PIN(A, 0), GPIO_INPUT) +GPIO(USB_C1_RT_RST_R_ODL, PIN(0, 2), GPIO_ODR_LOW) +GPIO(VCCST_PWRGD_OD, PIN(A, 4), GPIO_ODR_LOW) + +/* UART alternate functions */ +ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0) /* GPIO64/CR_SIN1, GPO65/CR_SOUT1/FLPRG1_L */ + +/* I2C alternate functions */ +ALTERNATE(PIN_MASK(3, 0x48), 0, MODULE_I2C, 0) /* GPIO33/I2C5_SCL0/CTS_L, GPIO36/RTS_L/I2C5_SDA0 */ +ALTERNATE(PIN_MASK(8, 0x80), 0, MODULE_I2C, 0) /* GPIO87/I2C1_SDA0 */ +ALTERNATE(PIN_MASK(9, 0x07), 0, MODULE_I2C, 0) /* GPIO92/I2C2_SCL0, GPIO91/I2C2_SDA0, GPIO90/I2C1_SCL0 */ +ALTERNATE(PIN_MASK(B, 0x0c), 0, MODULE_I2C, 0) /* GPIOB3/I2C7_SCL0/DCD_L, GPIOB2/I2C7_SDA0/DSR_L */ +ALTERNATE(PIN_MASK(B, 0x30), 0, MODULE_I2C, GPIO_SEL_1P8V) /* GPIOB5/I2C0_SCL0, GPIOB4/I2C0_SDA0 */ +ALTERNATE(PIN_MASK(D, 0x03), 0, MODULE_I2C, 0) /* GPIOD1/I2C3_SCL0, GPIOD0/I2C3_SDA0 */ +ALTERNATE(PIN_MASK(E, 0x18), 0, MODULE_I2C, 0) /* GPIOE4/I2C6_SCL1/I3C_SCL, GPIOE3/I2C6_SDA1/I3C_SDA */ +ALTERNATE(PIN_MASK(F, 0x0c), 0, MODULE_I2C, 0) /* GPIOF3/I2C4_SCL1, GPIOF2/I2C4_SDA1 */ + +/* PWM alternate functions */ +ALTERNATE(PIN_MASK(4, 0x01), 0, MODULE_PWM, 0) /* GPIO40/TA1 */ +ALTERNATE(PIN_MASK(6, 0x01), 0, MODULE_PWM, 0) /* GPIO60/PWM7 */ +ALTERNATE(PIN_MASK(8, 0x01), 0, MODULE_PWM, 0) /* GPIO80/PWM3 */ +ALTERNATE(PIN_MASK(B, 0x80), 0, MODULE_PWM, 0) /* GPIOB7/PWM5 */ +ALTERNATE(PIN_MASK(C, 0x1c), 0, MODULE_PWM, 0) /* GPIOC4/PWM2, GPIOC3/PWM0, GPIOC2/PWM1/I2C6_SCL0 */ + +/* ADC alternate functions */ +ALTERNATE(PIN_MASK(3, 0x10), 0, MODULE_ADC, 0) /* GPIO34/PS2_DAT2/ADC6 */ +ALTERNATE(PIN_MASK(4, 0x34), 0, MODULE_ADC, 0) /* GPIO42/ADC3/RI_L, GPIO45/ADC0, GPIO44/ADC1 */ +ALTERNATE(PIN_MASK(E, 0x02), 0, MODULE_ADC, 0) /* GPIOE1/ADC7 */ + +/* KB alternate functions */ +ALTERNATE(PIN_MASK(0, 0xf0), 0, MODULE_KB, GPIO_ODR_HIGH) /* KSO10&P80_CLK/GPIO07, KSO11&P80_DAT/GPIO06, KSO12/GPIO05, KSO13/GPIO04 */ +ALTERNATE(PIN_MASK(1, 0x7f), 0, MODULE_KB, GPIO_ODR_HIGH) /* KSO06/GPO13/GP_SEL_L, KSO07/GPO12/JEN_L, KSO03/GPIO16/JTAG_TDO0_SWO, KSO04/GPIO15/XNOR, KSO05/GPIO14, KSO08/GPIO11/CR_SOUT1, KSO09/GPIO10/CR_SIN1 */ +ALTERNATE(PIN_MASK(2, 0xfc), 0, MODULE_KB, GPIO_INPUT | GPIO_PULL_UP) /* KSI2/GPIO27/TRACEDATA1, KSI3/GPIO26/TRACEDATA0, KSI4/GPIO25/TRACECLK/GP_SCLK, KSI5/GPIO24/GP_MISO, KSI6/GPIO23/S_SBUB, KSI7/GPIO22/S_SBUA */ +ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KB, GPIO_ODR_HIGH) /* KSO00/GPIO21/JTAG_TCK_SWCLK, KSO01/GPIO20/JTAG_TMS_SWIO */ +ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KB, GPIO_INPUT | GPIO_PULL_UP) /* KSI0/GPIO31/TRACEDATA3/GP_MOSI, KSI1/GPIO30/TRACEDATA2/GP_CS_L */ +ALTERNATE(PIN_MASK(8, 0x04), 0, MODULE_KB, GPIO_ODR_HIGH) /* KSO14/GPIO82 */ + +/* PMU alternate functions */ +ALTERNATE(PIN_MASK(0, 0x01), 0, MODULE_PMU, GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH) /* PSL_IN2_L&GPI00/GPIO00 */ +ALTERNATE(PIN_MASK(0, 0x02), 0, MODULE_PMU, GPIO_INT_BOTH | GPIO_HIB_WAKE_LOW) /* GPIO01/PSL_IN3_L&GPI01 */ +ALTERNATE(PIN_MASK(D, 0x04), 0, MODULE_PMU, GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH) /* PSL_IN1_L&GPID2/GPIOD2 */ + +/* Unused Pins */ +UNUSED(PIN(D, 6)) /* GPOD6/CR_SOUT3/SHDF_ESPI_L */ +UNUSED(PIN(3, 2)) /* GPO32/TRIS_L */ +UNUSED(PIN(3, 5)) /* GPO35/CR_SOUT4/TEST_L */ +UNUSED(PIN(6, 6)) /* GPIO66 */ + +/* Pre-configured PSL balls: J8 K6 */ -#include "generated-gpio.inc" /* * The NPCX keyboard driver does not use named GPIOs to access |