diff options
Diffstat (limited to 'chip/npcx/build.mk')
-rw-r--r-- | chip/npcx/build.mk | 74 |
1 files changed, 0 insertions, 74 deletions
diff --git a/chip/npcx/build.mk b/chip/npcx/build.mk deleted file mode 100644 index 2785f92ea4..0000000000 --- a/chip/npcx/build.mk +++ /dev/null @@ -1,74 +0,0 @@ -# -*- makefile -*- -# Copyright 2014 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# NPCX chip specific files build -# - -# NPCX SoC has a Cortex-M4F ARM core -CORE:=cortex-m -# Allow the full Cortex-M4 instruction set -CFLAGS_CPU+=-march=armv7e-m -mcpu=cortex-m4 - -# Assign default CHIP_FAMILY as npcx5 for old boards used npcx5 series -ifeq ($(CHIP_FAMILY),) -CHIP_FAMILY:=npcx5 -endif - -# Required chip modules -chip-y=header.o clock.o gpio.o hwtimer.o system.o uart.o uartn.o sib.o -chip-y+=system-$(CHIP_FAMILY).o - -# Optional chip modules -chip-$(CONFIG_ADC)+=adc.o -chip-$(CONFIG_AUDIO_CODEC)+=audio_codec.o -chip-$(CONFIG_FANS)+=fan.o -chip-$(CONFIG_FLASH_PHYSICAL)+=flash.o -chip-$(CONFIG_I2C)+=i2c.o i2c-$(CHIP_FAMILY).o -chip-$(CONFIG_HOSTCMD_X86)+=lpc.o -chip-$(CONFIG_HOSTCMD_ESPI)+=espi.o -chip-$(CONFIG_PECI)+=peci.o -chip-$(CONFIG_HOSTCMD_SPS)+=shi.o -chip-$(CONFIG_CEC)+=cec.o -# pwm functions are implemented with the fan functions -chip-$(CONFIG_PWM)+=pwm.o -chip-$(CONFIG_SPI)+=spi.o -chip-$(CONFIG_WATCHDOG)+=watchdog.o -ifndef CONFIG_KEYBOARD_NOT_RAW -chip-$(HAS_TASK_KEYSCAN)+=keyboard_raw.o -endif -chip-$(CONFIG_WAKE_ON_VOICE)+=apm.o -chip-$(CONFIG_WAKE_ON_VOICE)+=wov.o - -# spi monitor program fw for openocd and UUT(UART Update Tool) -npcx-monitor-fw=chip/npcx/spiflashfw/npcx_monitor -npcx-monitor-fw-bin=${out}/$(npcx-monitor-fw).bin -PROJECT_EXTRA+=${npcx-monitor-fw-bin} -# Monitor header is only used for UUT which is not supported on npcx5. -ifneq "$(CHIP_FAMILY)" "npcx5" -npcx-monitor-hdr=chip/npcx/spiflashfw/monitor_hdr -npcx-monitor-hdr-ro-bin=${out}/$(npcx-monitor-hdr)_ro.bin -npcx-monitor-hdr-rw-bin=${out}/$(npcx-monitor-hdr)_rw.bin -PROJECT_EXTRA+=${npcx-monitor-hdr-ro-bin} ${npcx-monitor-hdr-rw-bin} -endif - -# ECST tool is for filling the header used by booter of npcx EC -show_esct_cmd=$(if $(V),,echo ' ECST ' $(subst $(out)/,,$@) ; ) - -# ECST options for header -bld_ecst=${out}/util/ecst -chip $(CHIP_VARIANT) -usearmrst -mode bt -ph -i $(1) -o $(2) -nohcrc \ --nofcrc -flashsize 8 -spimaxclk 50 -spireadmode dual 1> /dev/null - -# Replace original one with the flat file including header -moveflat=mv -f $(1) $(2) - -# Commands for ECST -cmd_ecst=$(show_esct_cmd)$(call moveflat,$@,$@.tmp);$(call bld_ecst,$@.tmp,$@) - -# Commands to append npcx header in ec.RO.flat -cmd_org_ec_elf_to_flat = $(OBJCOPY) --set-section-flags .roshared=share \ - -O binary $(patsubst %.flat,%.elf,$@) $@ -cmd_npcx_ro_elf_to_flat=$(cmd_org_ec_elf_to_flat);$(cmd_ecst) -cmd_ec_elf_to_flat = $(if $(filter $(out)/RO/ec.RO.flat, $@), \ - $(cmd_npcx_ro_elf_to_flat), $(cmd_org_ec_elf_to_flat) ) |