diff options
Diffstat (limited to 'chip/stm32/clock-stm32l15x.c')
-rw-r--r-- | chip/stm32/clock-stm32l15x.c | 15 |
1 files changed, 11 insertions, 4 deletions
diff --git a/chip/stm32/clock-stm32l15x.c b/chip/stm32/clock-stm32l15x.c index 057888f68f..59f53c6400 100644 --- a/chip/stm32/clock-stm32l15x.c +++ b/chip/stm32/clock-stm32l15x.c @@ -28,7 +28,7 @@ void clock_init(void) /* * The initial state : - * SYSCLK from HSI (=16MHz), no divider on AHB, APB1, APB2 + * SYSCLK from MSI (=2MHz), no divider on AHB, APB1, APB2 * PLL unlocked, RTC enabled on LSE */ @@ -41,7 +41,8 @@ void clock_init(void) ; } - /* Set the recommended flash settings for 16MHz clock. + /* + * Set the recommended flash settings for 16MHz clock. * * The 3 bits must be programmed strictly sequentially, * but it is faster not to read-back the value of the ACR register @@ -58,11 +59,13 @@ void clock_init(void) tmp_acr |= (1 << 0); STM32_FLASH_ACR = tmp_acr; +#ifdef CONFIG_USE_PLL /* - * stays on HSI, no prescaler, PLLSRC = HSI, PLLMUL = x3, PLLDIV = /3, - * no MCO => PLLVCO = 48 MHz and PLLCLK = 16 Mhz + * Switch to HSI, no prescaler, PLLSRC = HSI, PLLMUL = x3, PLLDIV = /3, + * no MCO => PLLVCO = 48 MHz and PLLCLK = 16 Mhz. */ STM32_RCC_CFGR = 0x00800001; + /* Enable the PLL */ STM32_RCC_CR |= 1 << 24; /* Wait for the PLL to lock */ @@ -73,4 +76,8 @@ void clock_init(void) /* wait until the PLL is the clock source */ while ((STM32_RCC_CFGR & 0xc) != 0xc) ; +#else + /* Switch to HSI */ + STM32_RCC_CFGR = 0x00000001; +#endif } |