diff options
Diffstat (limited to 'chip/stm32/hwtimer.c')
-rw-r--r-- | chip/stm32/hwtimer.c | 454 |
1 files changed, 0 insertions, 454 deletions
diff --git a/chip/stm32/hwtimer.c b/chip/stm32/hwtimer.c deleted file mode 100644 index 953110017f..0000000000 --- a/chip/stm32/hwtimer.c +++ /dev/null @@ -1,454 +0,0 @@ -/* Copyright 2012 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Hardware timers driver */ - -#include "clock.h" -#include "clock-f.h" -#include "common.h" -#include "hooks.h" -#include "hwtimer.h" -#include "panic.h" -#include "registers.h" -#include "task.h" -#include "timer.h" -#include "watchdog.h" - -/* - * Trigger select mapping for slave timer from master timer. This is - * unfortunately not very straightforward; there's no tidy way to do this - * algorithmically. To avoid burning memory for a lookup table, use macros to - * compute the offset. This also has the benefit that compilation will fail if - * an unsupported master/slave pairing is used. - */ -#ifdef CHIP_FAMILY_STM32F0 -/* - * Slave Master - * 1 15 2 3 17 - * 2 1 15 3 14 - * 3 1 2 15 14 - * 15 2 3 16 17 - * -------------------- - * ts = 0 1 2 3 - */ -#define STM32_TIM_TS_SLAVE_1_MASTER_15 0 -#define STM32_TIM_TS_SLAVE_1_MASTER_2 1 -#define STM32_TIM_TS_SLAVE_1_MASTER_3 2 -#define STM32_TIM_TS_SLAVE_1_MASTER_17 3 -#define STM32_TIM_TS_SLAVE_2_MASTER_1 0 -#define STM32_TIM_TS_SLAVE_2_MASTER_15 1 -#define STM32_TIM_TS_SLAVE_2_MASTER_3 2 -#define STM32_TIM_TS_SLAVE_2_MASTER_14 3 -#define STM32_TIM_TS_SLAVE_3_MASTER_1 0 -#define STM32_TIM_TS_SLAVE_3_MASTER_2 1 -#define STM32_TIM_TS_SLAVE_3_MASTER_15 2 -#define STM32_TIM_TS_SLAVE_3_MASTER_14 3 -#define STM32_TIM_TS_SLAVE_15_MASTER_2 0 -#define STM32_TIM_TS_SLAVE_15_MASTER_3 1 -#define STM32_TIM_TS_SLAVE_15_MASTER_16 2 -#define STM32_TIM_TS_SLAVE_15_MASTER_17 3 -#elif defined(CHIP_FAMILY_STM32F3) -/* - * Slave Master - * 2 19 15 3 14 - * 3 19 2 5 14 - * 4 19 2 3 15 - * 5 2 3 4 15 - * 12 4 5 13 14 - * 19 2 3 15 16 - * --------------------- - * ts = 0 1 2 3 - */ -#define STM32_TIM_TS_SLAVE_2_MASTER_19 0 -#define STM32_TIM_TS_SLAVE_2_MASTER_15 1 -#define STM32_TIM_TS_SLAVE_2_MASTER_3 2 -#define STM32_TIM_TS_SLAVE_2_MASTER_14 3 -#define STM32_TIM_TS_SLAVE_3_MASTER_19 0 -#define STM32_TIM_TS_SLAVE_3_MASTER_2 1 -#define STM32_TIM_TS_SLAVE_3_MASTER_5 2 -#define STM32_TIM_TS_SLAVE_3_MASTER_14 3 -#define STM32_TIM_TS_SLAVE_4_MASTER_19 0 -#define STM32_TIM_TS_SLAVE_4_MASTER_2 1 -#define STM32_TIM_TS_SLAVE_4_MASTER_3 2 -#define STM32_TIM_TS_SLAVE_4_MASTER_15 3 -#define STM32_TIM_TS_SLAVE_5_MASTER_2 0 -#define STM32_TIM_TS_SLAVE_5_MASTER_3 1 -#define STM32_TIM_TS_SLAVE_5_MASTER_4 2 -#define STM32_TIM_TS_SLAVE_5_MASTER_15 3 -#define STM32_TIM_TS_SLAVE_12_MASTER_4 0 -#define STM32_TIM_TS_SLAVE_12_MASTER_5 1 -#define STM32_TIM_TS_SLAVE_12_MASTER_13 2 -#define STM32_TIM_TS_SLAVE_12_MASTER_14 3 -#define STM32_TIM_TS_SLAVE_19_MASTER_2 0 -#define STM32_TIM_TS_SLAVE_19_MASTER_3 1 -#define STM32_TIM_TS_SLAVE_19_MASTER_15 2 -#define STM32_TIM_TS_SLAVE_19_MASTER_16 3 -#else /* !CHIP_FAMILY_STM32F0 && !CHIP_FAMILY_STM32F3 */ -/* - * Slave Master - * 1 15 2 3 4 (STM32F100 only) - * 2 9 10 3 4 - * 3 9 2 11 4 - * 4 10 2 3 9 - * 9 2 3 10 11 (STM32L15x only) - * -------------------- - * ts = 0 1 2 3 - */ -#define STM32_TIM_TS_SLAVE_1_MASTER_15 0 -#define STM32_TIM_TS_SLAVE_1_MASTER_2 1 -#define STM32_TIM_TS_SLAVE_1_MASTER_3 2 -#define STM32_TIM_TS_SLAVE_1_MASTER_4 3 -#define STM32_TIM_TS_SLAVE_2_MASTER_9 0 -#define STM32_TIM_TS_SLAVE_2_MASTER_10 1 -#define STM32_TIM_TS_SLAVE_2_MASTER_3 2 -#define STM32_TIM_TS_SLAVE_2_MASTER_4 3 -#define STM32_TIM_TS_SLAVE_3_MASTER_9 0 -#define STM32_TIM_TS_SLAVE_3_MASTER_2 1 -#define STM32_TIM_TS_SLAVE_3_MASTER_11 2 -#define STM32_TIM_TS_SLAVE_3_MASTER_4 3 -#define STM32_TIM_TS_SLAVE_4_MASTER_10 0 -#define STM32_TIM_TS_SLAVE_4_MASTER_2 1 -#define STM32_TIM_TS_SLAVE_4_MASTER_3 2 -#define STM32_TIM_TS_SLAVE_4_MASTER_9 3 -#define STM32_TIM_TS_SLAVE_9_MASTER_2 0 -#define STM32_TIM_TS_SLAVE_9_MASTER_3 1 -#define STM32_TIM_TS_SLAVE_9_MASTER_10 2 -#define STM32_TIM_TS_SLAVE_9_MASTER_11 3 -#endif /* !CHIP_FAMILY_STM32F0 */ -#define TSMAP(slave, master) \ - CONCAT4(STM32_TIM_TS_SLAVE_, slave, _MASTER_, master) - -/* - * Timers are defined per board. This gives us flexibility to work around - * timers which are dedicated to board-specific PWM sources. - */ -#define IRQ_TIM(n) CONCAT2(STM32_IRQ_TIM, n) -#define IRQ_MSB IRQ_TIM(TIM_CLOCK_MSB) -#define IRQ_LSB IRQ_TIM(TIM_CLOCK_LSB) -#define IRQ_WD IRQ_TIM(TIM_WATCHDOG) - -/* TIM1 has fancy names for its IRQs; remap count-up IRQ for the macro above */ -#if defined TIM_WATCHDOG && (TIM_WATCHDOG == 1) -#define STM32_IRQ_TIM1 STM32_IRQ_TIM1_BRK_UP_TRG -#else /* !(TIM_WATCHDOG == 1) */ -#define STM32_IRQ_TIM1 STM32_IRQ_TIM1_CC -#endif /* !(TIM_WATCHDOG == 1) */ - -#define TIM_BASE(n) CONCAT3(STM32_TIM, n, _BASE) -#define TIM_WD_BASE TIM_BASE(TIM_WATCHDOG) - -static uint32_t last_deadline; - -void __hw_clock_event_set(uint32_t deadline) -{ - last_deadline = deadline; - - if ((deadline >> 16) > STM32_TIM_CNT(TIM_CLOCK_MSB)) { - /* first set a match on the MSB */ - STM32_TIM_CCR1(TIM_CLOCK_MSB) = deadline >> 16; - /* disable LSB match */ - STM32_TIM_DIER(TIM_CLOCK_LSB) &= ~2; - /* Clear the match flags */ - STM32_TIM_SR(TIM_CLOCK_MSB) = ~2; - STM32_TIM_SR(TIM_CLOCK_LSB) = ~2; - /* Set the match interrupt */ - STM32_TIM_DIER(TIM_CLOCK_MSB) |= 2; - } - /* - * In the unlikely case where the MSB has increased and matched - * the deadline MSB before we set the match interrupt, as the STM - * hardware timer won't trigger an interrupt, we fall back to the - * following LSB event code to set another interrupt. - */ - if ((deadline >> 16) == STM32_TIM_CNT(TIM_CLOCK_MSB)) { - /* we can set a match on the LSB only */ - STM32_TIM_CCR1(TIM_CLOCK_LSB) = deadline & 0xffff; - /* disable MSB match */ - STM32_TIM_DIER(TIM_CLOCK_MSB) &= ~2; - /* Clear the match flags */ - STM32_TIM_SR(TIM_CLOCK_MSB) = ~2; - STM32_TIM_SR(TIM_CLOCK_LSB) = ~2; - /* Set the match interrupt */ - STM32_TIM_DIER(TIM_CLOCK_LSB) |= 2; - } - /* - * If the LSB deadline is already in the past and won't trigger an - * interrupt, the common code in process_timers will deal with the - * expired timer and automatically set the next deadline, we don't need - * to do anything here. - */ -} - -uint32_t __hw_clock_event_get(void) -{ - return last_deadline; -} - -void __hw_clock_event_clear(void) -{ - /* Disable the match interrupts */ - STM32_TIM_DIER(TIM_CLOCK_LSB) &= ~2; - STM32_TIM_DIER(TIM_CLOCK_MSB) &= ~2; -} - -uint32_t __hw_clock_source_read(void) -{ - uint32_t hi; - uint32_t lo; - - /* Ensure the two half-words are coherent */ - do { - hi = STM32_TIM_CNT(TIM_CLOCK_MSB); - lo = STM32_TIM_CNT(TIM_CLOCK_LSB); - } while (hi != STM32_TIM_CNT(TIM_CLOCK_MSB)); - - return (hi << 16) | lo; -} - -void __hw_clock_source_set(uint32_t ts) -{ - STM32_TIM_CNT(TIM_CLOCK_MSB) = ts >> 16; - STM32_TIM_CNT(TIM_CLOCK_LSB) = ts & 0xffff; -} - -void __hw_clock_source_irq(void) -{ - uint32_t stat_tim_msb = STM32_TIM_SR(TIM_CLOCK_MSB); - - /* Clear status */ - STM32_TIM_SR(TIM_CLOCK_LSB) = 0; - STM32_TIM_SR(TIM_CLOCK_MSB) = 0; - - /* - * Find expired timers and set the new timer deadline - * signal overflow if the 16-bit MSB counter has overflowed. - */ - process_timers(stat_tim_msb & 0x01); -} -DECLARE_IRQ(IRQ_MSB, __hw_clock_source_irq, 1); -DECLARE_IRQ(IRQ_LSB, __hw_clock_source_irq, 1); - -void __hw_timer_enable_clock(int n, int enable) -{ - volatile uint32_t *reg; - uint32_t mask = 0; - - /* - * Mapping of timers to reg/mask is split into a few different ranges, - * some specific to individual chips. - */ -#if defined(CHIP_FAMILY_STM32F0) - if (n == 1) { - reg = &STM32_RCC_APB2ENR; - mask = STM32_RCC_PB2_TIM1; - } -#elif defined(CHIP_FAMILY_STM32L) || defined(CHIP_FAMILY_STM32F4) - if (n >= 9 && n <= 11) { - reg = &STM32_RCC_APB2ENR; - mask = STM32_RCC_PB2_TIM9 << (n - 9); - } -#endif - -#if defined(CHIP_FAMILY_STM32F0) - if (n >= 15 && n <= 17) { - reg = &STM32_RCC_APB2ENR; - mask = STM32_RCC_PB2_TIM15 << (n - 15); - } -#endif - -#if defined(CHIP_FAMILY_STM32F0) || defined(CHIP_FAMILY_STM32F3) - if (n == 14) { - reg = &STM32_RCC_APB1ENR; - mask = STM32_RCC_PB1_TIM14; - } -#endif - -#if defined(CHIP_FAMILY_STM32F3) - if (n == 12 || n == 13) { - reg = &STM32_RCC_APB1ENR; - mask = STM32_RCC_PB1_TIM12 << (n - 12); - } - if (n == 18) { - reg = &STM32_RCC_APB1ENR; - mask = STM32_RCC_PB1_TIM18; - } - if (n == 19) { - reg = &STM32_RCC_APB2ENR; - mask = STM32_RCC_PB2_TIM19; - } -#endif - - if (n >= 2 && n <= 7) { - reg = &STM32_RCC_APB1ENR; - mask = STM32_RCC_PB1_TIM2 << (n - 2); - } - - if (!mask) - return; - - if (enable) - *reg |= mask; - else - *reg &= ~mask; -} - -static void update_prescaler(void) -{ - /* - * Pre-scaler value : - * TIM_CLOCK_LSB is counting microseconds; - * TIM_CLOCK_MSB is counting every TIM_CLOCK_LSB overflow. - * - * This will take effect at the next update event (when the current - * prescaler counter ticks down, or if forced via EGR). - */ - STM32_TIM_PSC(TIM_CLOCK_MSB) = 0; - STM32_TIM_PSC(TIM_CLOCK_LSB) = (clock_get_timer_freq() / SECOND) - 1; -} -DECLARE_HOOK(HOOK_FREQ_CHANGE, update_prescaler, HOOK_PRIO_DEFAULT); - -int __hw_clock_source_init(uint32_t start_t) -{ - /* - * we use 2 chained 16-bit counters to emulate a 32-bit one : - * TIM_CLOCK_MSB is the MSB (Slave) - * TIM_CLOCK_LSB is the LSB (Master) - */ - - /* Enable TIM_CLOCK_MSB and TIM_CLOCK_LSB clocks */ - __hw_timer_enable_clock(TIM_CLOCK_MSB, 1); - __hw_timer_enable_clock(TIM_CLOCK_LSB, 1); - - /* Delay 1 APB clock cycle after the clock is enabled */ - clock_wait_bus_cycles(BUS_APB, 1); - - /* - * Timer configuration : Upcounter, counter disabled, update event only - * on overflow. - */ - STM32_TIM_CR1(TIM_CLOCK_MSB) = 0x0004; - STM32_TIM_CR1(TIM_CLOCK_LSB) = 0x0004; - /* - * TIM_CLOCK_LSB (master mode) generates a periodic trigger signal on - * each UEV - */ - STM32_TIM_CR2(TIM_CLOCK_MSB) = 0x0000; - STM32_TIM_CR2(TIM_CLOCK_LSB) = 0x0020; - - STM32_TIM_SMCR(TIM_CLOCK_MSB) = 0x0007 | - (TSMAP(TIM_CLOCK_MSB, TIM_CLOCK_LSB) << 4); - STM32_TIM_SMCR(TIM_CLOCK_LSB) = 0x0000; - - /* Auto-reload value : 16-bit free-running counters */ - STM32_TIM_ARR(TIM_CLOCK_MSB) = 0xffff; - STM32_TIM_ARR(TIM_CLOCK_LSB) = 0xffff; - - /* Update prescaler */ - update_prescaler(); - - /* Reload the pre-scaler */ - STM32_TIM_EGR(TIM_CLOCK_MSB) = 0x0001; - STM32_TIM_EGR(TIM_CLOCK_LSB) = 0x0001; - - /* Set up the overflow interrupt on TIM_CLOCK_MSB */ - STM32_TIM_DIER(TIM_CLOCK_MSB) = 0x0001; - STM32_TIM_DIER(TIM_CLOCK_LSB) = 0x0000; - - /* Start counting */ - STM32_TIM_CR1(TIM_CLOCK_MSB) |= 1; - STM32_TIM_CR1(TIM_CLOCK_LSB) |= 1; - - /* Override the count with the start value now that counting has - * started. */ - __hw_clock_source_set(start_t); - - /* Enable timer interrupts */ - task_enable_irq(IRQ_MSB); - task_enable_irq(IRQ_LSB); - - return IRQ_LSB; -} - -#ifdef CONFIG_WATCHDOG_HELP - -void __keep watchdog_check(uint32_t excep_lr, uint32_t excep_sp) -{ - struct timer_ctlr *timer = (struct timer_ctlr *)TIM_WD_BASE; - - /* clear status */ - timer->sr = 0; - - watchdog_trace(excep_lr, excep_sp); -} - -void IRQ_HANDLER(IRQ_WD)(void) __attribute__((naked)); -void IRQ_HANDLER(IRQ_WD)(void) -{ - /* Naked call so we can extract raw LR and SP */ - asm volatile("mov r0, lr\n" - "mov r1, sp\n" - /* Must push registers in pairs to keep 64-bit aligned - * stack for ARM EABI. */ - "push {r0, lr}\n" - "bl watchdog_check\n" - "pop {r0,pc}\n"); -} -const struct irq_priority __keep IRQ_PRIORITY(IRQ_WD) - __attribute__((section(".rodata.irqprio"))) - = {IRQ_WD, 0}; /* put the watchdog at the highest - priority */ - -void hwtimer_setup_watchdog(void) -{ - struct timer_ctlr *timer = (struct timer_ctlr *)TIM_WD_BASE; - - /* Enable clock */ - __hw_timer_enable_clock(TIM_WATCHDOG, 1); - - /* Delay 1 APB clock cycle after the clock is enabled */ - clock_wait_bus_cycles(BUS_APB, 1); - - /* - * Timer configuration : Down counter, counter disabled, update - * event only on overflow. - */ - timer->cr1 = 0x0014 | BIT(7); - - /* TIM (slave mode) uses TIM_CLOCK_LSB as internal trigger */ - timer->smcr = 0x0007 | (TSMAP(TIM_WATCHDOG, TIM_CLOCK_LSB) << 4); - - /* - * The auto-reload value is based on the period between rollovers for - * TIM_CLOCK_LSB. Since TIM_CLOCK_LSB runs at 1MHz, it will overflow - * in 65.536ms. We divide our required watchdog period by this amount - * to obtain the number of times TIM_CLOCK_LSB can overflow before we - * generate an interrupt. - */ - timer->arr = timer->cnt = CONFIG_AUX_TIMER_PERIOD_MS * MSEC / BIT(16); - - /* count on every TIM_CLOCK_LSB overflow */ - timer->psc = 0; - - /* Reload the pre-scaler from arr when it goes below zero */ - timer->egr = 0x0000; - - /* setup the overflow interrupt */ - timer->dier = 0x0001; - - /* Start counting */ - timer->cr1 |= 1; - - /* Enable timer interrupts */ - task_enable_irq(IRQ_WD); -} - -void hwtimer_reset_watchdog(void) -{ - struct timer_ctlr *timer = (struct timer_ctlr *)TIM_WD_BASE; - - timer->cnt = timer->arr; -} - -#endif /* defined(CONFIG_WATCHDOG_HELP) */ |