diff options
Diffstat (limited to 'chip/stm32/usart-stm32f3.c')
-rw-r--r-- | chip/stm32/usart-stm32f3.c | 120 |
1 files changed, 0 insertions, 120 deletions
diff --git a/chip/stm32/usart-stm32f3.c b/chip/stm32/usart-stm32f3.c deleted file mode 100644 index 42a0cf310e..0000000000 --- a/chip/stm32/usart-stm32f3.c +++ /dev/null @@ -1,120 +0,0 @@ -/* Copyright 2015 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ -#include "usart-stm32f3.h" - -#include "common.h" -#include "compile_time_macros.h" -#include "hooks.h" -#include "registers.h" -#include "task.h" -#include "util.h" - -/* - * This configs array stores the currently active usart_config structure for - * each USART, an entry will be NULL if no USART driver is initialized for the - * corresponding hardware instance. - */ -#define STM32_USARTS_MAX 3 - -static struct usart_config const *configs[STM32_USARTS_MAX]; - -struct usart_configs usart_get_configs(void) -{ - return (struct usart_configs) {configs, ARRAY_SIZE(configs)}; -} - -static void usart_variant_enable(struct usart_config const *config) -{ - configs[config->hw->index] = config; - - /* - * All three USARTS are clocked from the HSI(8MHz) source. This is - * done because the clock sources elsewhere are setup so that the result - * of clock_get_freq() is not the input clock frequency to the USARTs - * baud rate divisors. - */ - STM32_RCC_CFGR3 |= 0x000f0003; - - usart_set_baud_f0_l(config, config->baud, 8000000); - - task_enable_irq(config->hw->irq); -} - -static void usart_variant_disable(struct usart_config const *config) -{ - task_disable_irq(config->hw->irq); - - configs[config->hw->index] = NULL; -} - -static struct usart_hw_ops const usart_variant_hw_ops = { - .enable = usart_variant_enable, - .disable = usart_variant_disable, -}; - -void usart_clear_tc(struct usart_config const *config) -{ - STM32_USART_ICR(config->hw->base) |= STM32_USART_ICR_TCCF; -} - -/* - * USART interrupt bindings. These functions can not be defined as static or - * they will be removed by the linker because of the way that DECLARE_IRQ works. - */ -#if defined(CONFIG_STREAM_USART1) -struct usart_hw_config const usart1_hw = { - .index = 0, - .base = STM32_USART1_BASE, - .irq = STM32_IRQ_USART1, - .clock_register = &STM32_RCC_APB2ENR, - .clock_enable = STM32_RCC_PB2_USART1, - .ops = &usart_variant_hw_ops, -}; - -void usart1_interrupt(void) -{ - usart_interrupt(configs[0]); -} - -DECLARE_IRQ(STM32_IRQ_USART1, usart1_interrupt, 2); -#endif - -#if defined(CONFIG_STREAM_USART2) -struct usart_hw_config const usart2_hw = { - .index = 1, - .base = STM32_USART2_BASE, - .irq = STM32_IRQ_USART2, - .clock_register = &STM32_RCC_APB1ENR, - .clock_enable = STM32_RCC_PB1_USART2, - .ops = &usart_variant_hw_ops, -}; - -void usart2_interrupt(void) -{ - usart_interrupt(configs[1]); -} - -DECLARE_IRQ(STM32_IRQ_USART2, usart2_interrupt, 2); -#endif - -#if defined(CONFIG_STREAM_USART3) -struct usart_hw_config const usart3_hw = { - .index = 2, - .base = STM32_USART3_BASE, - .irq = STM32_IRQ_USART3, - .clock_register = &STM32_RCC_APB1ENR, - .clock_enable = STM32_RCC_PB1_USART3, - .ops = &usart_variant_hw_ops, -}; -#endif - -#if defined(CONFIG_STREAM_USART3) -void usart3_interrupt(void) -{ - usart_interrupt(configs[2]); -} - -DECLARE_IRQ(STM32_IRQ_USART3, usart3_interrupt, 2); -#endif |