diff options
Diffstat (limited to 'chip')
| -rw-r--r-- | chip/npcx/registers.h | 2 | ||||
| -rw-r--r-- | chip/npcx/uart.c | 12 | ||||
| -rw-r--r-- | chip/npcx/uartn.c | 25 | ||||
| -rw-r--r-- | chip/npcx/uartn.h | 2 |
4 files changed, 39 insertions, 2 deletions
diff --git a/chip/npcx/registers.h b/chip/npcx/registers.h index d31800f841..3a63f6ccb7 100644 --- a/chip/npcx/registers.h +++ b/chip/npcx/registers.h @@ -326,7 +326,7 @@ #define NPCX_UFTCTL_TEMPTY_LVL_SEL FIELD(0, 5) #define NPCX_UFTCTL_TEMPTY_LVL_EN 5 #define NPCX_UFTCTL_TEMPTY_EN 6 -#define NPCX_UFTCTL_NXIMPEN 7 +#define NPCX_UFTCTL_NXMIPEN 7 #define NPCX_UFRCTL_RFULL_LVL_SEL FIELD(0, 5) #define NPCX_UFRCTL_RFULL_LVL_EN 5 diff --git a/chip/npcx/uart.c b/chip/npcx/uart.c index a83de311ef..1e4d88f789 100644 --- a/chip/npcx/uart.c +++ b/chip/npcx/uart.c @@ -123,10 +123,14 @@ void uart_tx_start(void) void uart_tx_stop(void) { +#ifdef NPCX_UART_FIFO_SUPPORT + uartn_tx_stop(CONSOLE_UART, 0); +#else uint8_t sleep_ena; sleep_ena = (pad == UART_DEFAULT_PAD) ? 1 : 0; uartn_tx_stop(CONSOLE_UART, sleep_ena); +#endif } void uart_tx_flush(void) @@ -196,6 +200,14 @@ void uart_ec_interrupt(void) return; } #endif +#ifdef NPCX_UART_FIFO_SUPPORT + if (!uartn_tx_in_progress(CONSOLE_UART)) { + if (uart_buffer_empty()) { + uartn_enable_tx_complete_int(CONSOLE_UART, 0); + enable_sleep(SLEEP_MASK_UART); + } + } +#endif /* Default pad. */ /* Read input FIFO until empty, then fill output FIFO */ diff --git a/chip/npcx/uartn.c b/chip/npcx/uartn.c index 692e75419f..2269e11e7c 100644 --- a/chip/npcx/uartn.c +++ b/chip/npcx/uartn.c @@ -28,6 +28,13 @@ /* True if the Tx FIFO is not completely full */ #define NPCX_UART_TX_IS_READY(n) \ (!(GET_FIELD(NPCX_UFTSTS(n), NPCX_UFTSTS_TEMPTY_LVL) == 0)) + +/* Enable UART Tx "not" in transmission interrupt */ +#define NPCX_UART_TX_NXMIP_INT_EN(n) \ + (SET_BIT(NPCX_UFTCTL(n), NPCX_UFTCTL_NXMIPEN)) +/* Disable UART Tx "not" in transmission interrupt */ +#define NPCX_UART_TX_NXMIP_INT_DIS(n) \ + (CLEAR_BIT(NPCX_UFTCTL(n), NPCX_UFTCTL_NXMIPEN)) /* * True if Tx is in progress * (i.e. FIFO is not empty or last byte in TSFT (Transmit Shift register) @@ -114,6 +121,13 @@ void uartn_tx_start(uint8_t uart_num) /* Do not allow deep sleep while transmit in progress */ disable_sleep(SLEEP_MASK_UART); +#ifdef NPCX_UART_FIFO_SUPPORT + /* + * For FIFO mode, enable the NXMIP interrupt. This generates an + * interrupt when Tx (both FIFO and shift register) is empty + */ + NPCX_UART_TX_NXMIP_INT_EN(uart_num); +#else /* * Re-enable the transmit interrupt, then forcibly trigger the * interrupt. This works around a hardware problem with the @@ -121,10 +135,19 @@ void uartn_tx_start(uint8_t uart_num) * threshold is _crossed_, not just met. */ NPCX_UART_TX_EMPTY_INT_EN(uart_num); +#endif task_trigger_irq(uart_cfg[uart_num].irq); } +#ifdef NPCX_UART_FIFO_SUPPORT +void uartn_enable_tx_complete_int(uint8_t uart_num, uint8_t enable) +{ + enable ? NPCX_UART_TX_NXMIP_INT_EN(uart_num) : + NPCX_UART_TX_NXMIP_INT_DIS(uart_num); +} +#endif + void uartn_tx_stop(uint8_t uart_num, uint8_t sleep_ena) { /* Disable TX interrupt */ @@ -190,7 +213,7 @@ static void uartn_set_fifo_mode(uint8_t uart_num) /* Disable all Tx interrupts */ NPCX_UFTCTL(uart_num) &= ~(BIT(NPCX_UFTCTL_TEMPTY_LVL_EN) | BIT(NPCX_UFTCTL_TEMPTY_EN) | - BIT(NPCX_UFTCTL_NXIMPEN)); + BIT(NPCX_UFTCTL_NXMIPEN)); } #endif diff --git a/chip/npcx/uartn.h b/chip/npcx/uartn.h index fc5c2599d0..e5326f72b8 100644 --- a/chip/npcx/uartn.h +++ b/chip/npcx/uartn.h @@ -60,4 +60,6 @@ void uartn_clear_rx_fifo(int channel); void uartn_rx_int_en(uint8_t uart_num); /* Enable the UART Wake-up */ void uartn_wui_en(uint8_t uart_num); +/* Enable/disable Tx NXMIP (No Transmit In Progress) interrupt */ +void uartn_enable_tx_complete_int(uint8_t uart_num, uint8_t enable); #endif /* __CROS_EC_UARTN_H */ |