diff options
Diffstat (limited to 'common/gaia_power.c')
| -rw-r--r-- | common/gaia_power.c | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/common/gaia_power.c b/common/gaia_power.c index 922b07afbb..20875cb0ce 100644 --- a/common/gaia_power.c +++ b/common/gaia_power.c @@ -42,13 +42,13 @@ #define CPRINTF(format, args...) cprintf(CC_CHIPSET, format, ## args) /* Time necessary for the 5v regulator output to stabilize */ -#define DELAY_5V_SETUP 1000 /* 1ms */ +#define DELAY_5V_SETUP MSEC /* 1ms */ /* Delay between 1.35v and 3.3v rails startup */ #define DELAY_RAIL_STAGGERING 100 /* 100us */ /* Long power key press to force shutdown */ -#define DELAY_FORCE_SHUTDOWN 8000000 /* 8s */ +#define DELAY_FORCE_SHUTDOWN (8 * SECOND) /* * If the power key is pressed to turn on, then held for this long, we @@ -68,11 +68,11 @@ * see XPSHOLD, it waits up to 16sec for an event. If no event occurs * within 16sec, EC powers off AP. */ -#define DELAY_SHUTDOWN_ON_POWER_HOLD (8 * 1000000) -#define DELAY_SHUTDOWN_ON_USB_BOOT (16 * 1000000) +#define DELAY_SHUTDOWN_ON_POWER_HOLD (8 * SECOND) +#define DELAY_SHUTDOWN_ON_USB_BOOT (16 * SECOND) /* Maximum delay after power button press before we release GPIO_PMIC_PWRON_L */ -#define DELAY_RELEASE_PWRON 1000000 /* 1s */ +#define DELAY_RELEASE_PWRON SECOND /* 1s */ /* debounce time to prevent accidental power-on after keyboard power off */ #define KB_PWR_ON_DEBOUNCE 250 /* 250us */ @@ -81,10 +81,10 @@ #define LID_SWITCH_DEBOUNCE 250 /* 250us */ /* PMIC fails to set the LDO2 output */ -#define PMIC_TIMEOUT 100000 /* 100ms */ +#define PMIC_TIMEOUT (100 * MSEC) /* 100ms */ /* Default timeout for input transition */ -#define FAIL_TIMEOUT 500000 /* 500ms */ +#define FAIL_TIMEOUT (500 * MSEC) /* 500ms */ /* Application processor power state */ @@ -538,9 +538,9 @@ static int command_force_power(int argc, char **argv) force_value = 1; /* Wake up the task */ task_wake(TASK_ID_GAIAPOWER); - /* wait 100 ms */ - usleep(100000); - /* release power button */ + /* Wait 100 ms */ + msleep(100); + /* Release power button */ force_signal = -1; force_value = 0; |