1 files changed, 143 insertions, 0 deletions
diff --git a/common/tsu6721.c b/common/tsu6721.c
new file mode 100644
index 0000000000..babd9c862b
--- /dev/null
+++ b/common/tsu6721.c
@@ -0,0 +1,143 @@
+/* Copyright (c) 2012 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ *
+ * TI TSU6721 USB port switch driver.
+ */
+
+#include "board.h"
+#include "console.h"
+#include "hooks.h"
+#include "i2c.h"
+#include "timer.h"
+#include "tsu6721.h"
+#include "uart.h"
+#include "util.h"
+
+/* Console output macros */
+#define CPUTS(outstr) cputs(CC_USBCHARGE, outstr)
+#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
+
+/* 8-bit I2C address */
+#define TSU6721_I2C_ADDR (0x25 << 1)
+
+uint8_t tsu6721_read(uint8_t reg)
+{
+	int res;
+	int val;
+
+	res = i2c_read8(I2C_PORT_HOST, TSU6721_I2C_ADDR, reg, &val);
+	if (res)
+		return 0xee;
+
+	return val;
+}
+
+void tsu6721_write(uint8_t reg, uint8_t val)
+{
+	int res;
+
+	res = i2c_write8(I2C_PORT_HOST, TSU6721_I2C_ADDR, reg, val);
+	if (res)
+		CPRINTF("[%T TSU6721 I2C write failed]\n");
+}
+
+int tsu6721_mux(enum tsu6721_mux sel)
+{
+	uint8_t id = tsu6721_read(TSU6721_REG_ADC);
+	uint8_t vbus1 = tsu6721_read(TSU6721_REG_DEV_TYPE1) & 0x74;
+	uint8_t vbus3 = tsu6721_read(TSU6721_REG_DEV_TYPE3) & 0x74;
+	uint8_t ctrl = tsu6721_read(TSU6721_REG_CONTROL);
+
+	/*
+	 * silicon limitation: the chip stays in low power mode and cannot
+	 * activate manual mode if it is not detecting either a VBUS or
+	 * something known on the ID pin
+	 */
+	if ((id == 0x1f) && !vbus1 && !vbus3) {
+		CPRINTF("TSU6721 cannot use manual mode: no VBUS or ID\n");
+		return EC_ERROR_INVAL;
+	}
+
+	if (sel == TSU6721_MUX_NONE) {
+		tsu6721_write(TSU6721_REG_CONTROL, ctrl | TSU6721_CTRL_AUTO);
+	} else {
+		tsu6721_write(TSU6721_REG_MANUAL1, sel);
+		tsu6721_write(TSU6721_REG_CONTROL, ctrl & ~TSU6721_CTRL_AUTO);
+	}
+
+	return EC_SUCCESS;
+}
+
+/*
+ * TODO(vpalatin): using the I2C early in the HOOK_INIT
+ * currently triggers all sort of badness, I need to debug
+ * this before re-activatin this initialization.
+ */
+#if 0
+static void tsu6721_init(void)
+{
+	uint8_t settings;
+	uint8_t dev_id = tsu6721_read(TSU6721_REG_DEV_ID);
+
+	if (dev_id != 0x0a) {
+		CPRINTF("TSU6721 invalid device ID 0x%02x\n", dev_id);
+		return;
+	}
+
+	/* set USB charger detection timeout to 600ms */
+	settings = tsu6721_read(TSU6721_REG_TIMER);
+	settings = (settings & ~0x38);
+	tsu6721_write(TSU6721_REG_TIMER, settings);
+}
+DECLARE_HOOK(HOOK_INIT, tsu6721_init, HOOK_PRIO_DEFAULT);
+#endif
+
+static void tsu6721_dump(void)
+{
+	int i;
+	uint8_t id = tsu6721_read(TSU6721_REG_ADC);
+	uint8_t ctrl = tsu6721_read(TSU6721_REG_CONTROL);
+
+	if (ctrl & TSU6721_CTRL_AUTO)
+		ccprintf("Auto: %02x %02x %02x\n",
+			tsu6721_read(TSU6721_REG_DEV_TYPE1),
+			tsu6721_read(TSU6721_REG_DEV_TYPE2),
+			tsu6721_read(TSU6721_REG_DEV_TYPE3));
+	else
+		ccprintf("Manual: %02x %02x\n",
+			tsu6721_read(TSU6721_REG_MANUAL1),
+			tsu6721_read(TSU6721_REG_MANUAL2));
+	ccprintf("ID: 0x%02x\n", id);
+	for (i = 1; i < 0x24; i++)
+		ccprintf("%02x ", tsu6721_read(i));
+	ccprintf("\n");
+}
+
+static int command_usbmux(int argc, char **argv)
+{
+	if (1 == argc) { /* dump all registers */
+		tsu6721_dump();
+		return EC_SUCCESS;
+	} else if (2 == argc) {
+		if (!strcasecmp(argv[1], "usb")) {
+			tsu6721_mux(TSU6721_MUX_USB);
+		} else if (!strcasecmp(argv[1], "uart1")) {
+			tsu6721_mux(TSU6721_MUX_UART);
+		} else if (!strcasecmp(argv[1], "uart2")) {
+			tsu6721_mux(TSU6721_MUX_AUDIO);
+		} else if (!strcasecmp(argv[1], "auto")) {
+			tsu6721_mux(TSU6721_MUX_NONE);
+		} else { /* read one register */
+			ccprintf("Invalid mux value: %s\n", argv[1]);
+			return EC_ERROR_INVAL;
+		}
+		return EC_SUCCESS;
+	}
+
+	return EC_ERROR_INVAL;
+}
+DECLARE_CONSOLE_COMMAND(usbmux, command_usbmux,
+			"[usb|uart1|uart2|auto]",
+			"TSU6721 USB mux control",
+			NULL);