diff options
Diffstat (limited to 'common/usb_pd_policy.c')
-rw-r--r-- | common/usb_pd_policy.c | 405 |
1 files changed, 2 insertions, 403 deletions
diff --git a/common/usb_pd_policy.c b/common/usb_pd_policy.c index dbea31bf6d..d39aaf4172 100644 --- a/common/usb_pd_policy.c +++ b/common/usb_pd_policy.c @@ -154,24 +154,6 @@ void reset_pd_cable(int port) cable[port].last_sop_p_p_msg_id = INVALID_MSG_ID_COUNTER; } -bool should_enter_usb4_mode(int port) -{ - return IS_ENABLED(CONFIG_USB_PD_USB4) && - cable[port].flags & CABLE_FLAGS_ENTER_USB_MODE; -} - -void enable_enter_usb4_mode(int port) -{ - if (IS_ENABLED(CONFIG_USB_PD_USB4)) - cable[port].flags |= CABLE_FLAGS_ENTER_USB_MODE; -} - -void disable_enter_usb4_mode(int port) -{ - if (IS_ENABLED(CONFIG_USB_PD_USB4)) - cable[port].flags &= ~CABLE_FLAGS_ENTER_USB_MODE; -} - #ifdef CONFIG_USB_PD_ALT_MODE #ifdef CONFIG_USB_PD_ALT_MODE_DFP @@ -181,168 +163,6 @@ static struct pd_discovery discovery[CONFIG_USB_PD_PORT_MAX_COUNT] static struct partner_active_modes partner_amodes[CONFIG_USB_PD_PORT_MAX_COUNT] [AMODE_TYPE_COUNT]; -static bool is_vdo_present(int cnt, int index) -{ - return cnt > index; -} - -static bool is_modal(int port, int cnt, const uint32_t *payload) -{ - return is_vdo_present(cnt, VDO_INDEX_IDH) && - PD_IDH_IS_MODAL(payload[VDO_INDEX_IDH]); -} - -static bool is_tbt_compat_mode(int port, int cnt, const uint32_t *payload) -{ - /* - * Ref: USB Type-C cable and connector specification - * F.2.5 TBT3 Device Discover Mode Responses - */ - return is_vdo_present(cnt, VDO_INDEX_IDH) && - PD_VDO_RESP_MODE_INTEL_TBT(payload[VDO_INDEX_IDH]); -} - -static bool cable_supports_tbt_speed(int port) -{ - enum tbt_compat_cable_speed tbt_cable_speed = get_tbt_cable_speed(port); - - return (tbt_cable_speed == TBT_SS_TBT_GEN3 || - tbt_cable_speed == TBT_SS_U32_GEN1_GEN2); -} - -static bool is_tbt_compat_enabled(int port) -{ - return (IS_ENABLED(CONFIG_USB_PD_TBT_COMPAT_MODE) && - (cable[port].flags & CABLE_FLAGS_TBT_COMPAT_ENABLE)); -} - -static void enable_tbt_compat_mode(int port) -{ - if (IS_ENABLED(CONFIG_USB_PD_TBT_COMPAT_MODE)) - cable[port].flags |= CABLE_FLAGS_TBT_COMPAT_ENABLE; -} - -static inline void disable_tbt_compat_mode(int port) -{ - if (IS_ENABLED(CONFIG_USB_PD_TBT_COMPAT_MODE)) - cable[port].flags &= ~CABLE_FLAGS_TBT_COMPAT_ENABLE; -} - -static inline void limit_tbt_cable_speed(int port) -{ - /* Cable flags are cleared when cable reset is called */ - cable[port].flags |= CABLE_FLAGS_TBT_COMPAT_LIMIT_SPEED; -} - -static inline bool is_limit_tbt_cable_speed(int port) -{ - return !!(cable[port].flags & CABLE_FLAGS_TBT_COMPAT_LIMIT_SPEED); -} - -static bool is_intel_svid(int port, enum tcpci_msg_type type) -{ - int i; - - for (i = 0; i < discovery[port][type].svid_cnt; i++) { - if (pd_get_svid(port, i, type) == USB_VID_INTEL) - return true; - } - - return false; -} - -static inline bool is_usb4_mode_enabled(int port) -{ - return (IS_ENABLED(CONFIG_USB_PD_USB4) && - (cable[port].flags & CABLE_FLAGS_USB4_CAPABLE)); -} - -static inline void enable_usb4_mode(int port) -{ - if (IS_ENABLED(CONFIG_USB_PD_USB4)) - cable[port].flags |= CABLE_FLAGS_USB4_CAPABLE; -} - -static inline void disable_usb4_mode(int port) -{ - if (IS_ENABLED(CONFIG_USB_PD_USB4)) - cable[port].flags &= ~CABLE_FLAGS_USB4_CAPABLE; -} - -/* - * Ref: USB Type-C Cable and Connector Specification - * Figure 5-1 USB4 Discovery and Entry Flow Model. - * - * Note: USB Type-C Cable and Connector Specification - * doesn't include details for Revision 2 cables. - * - * Passive Cable - * | - * ----------------------------------- - * | | - * Revision 2 Revision 3 - * USB Signalling USB Signalling - * | | - * ------------------ ------------------------- - * | | | | | | | - * USB2.0 USB3.1 USB3.1 USB3.2 USB4 USB3.2 USB2 - * | Gen1 Gen1 Gen2 Gen2 Gen3 Gen1 | - * | | | | | | Exit - * -------- ------------ -------- USB4 - * | | | Discovery. - * Exit Is DFP Gen3 Capable? Enter USB4 - * USB4 | with respective - * Discovery. --- No ---|--- Yes --- cable speed. - * | | - * Enter USB4 with Is Cable TBT3 - * respective cable | - * speed. --- No ---|--- Yes --- - * | | - * Enter USB4 with Enter USB4 with - * TBT Gen2 passive TBT Gen3 passive - * cable. cable. - * - */ -static bool is_cable_ready_to_enter_usb4(int port, int cnt) -{ - /* TODO: USB4 enter mode for Active cables */ - struct pd_discovery *disc = &discovery[port][TCPCI_MSG_SOP_PRIME]; - if (IS_ENABLED(CONFIG_USB_PD_USB4) && - (get_usb_pd_cable_type(port) == IDH_PTYPE_PCABLE) && - is_vdo_present(cnt, VDO_INDEX_PTYPE_CABLE1)) { - switch (cable[port].rev) { - case PD_REV30: - switch (disc->identity.product_t1.p_rev30.ss) { - case USB_R30_SS_U40_GEN3: - case USB_R30_SS_U32_U40_GEN1: - return true; - case USB_R30_SS_U32_U40_GEN2: - /* Check if DFP is Gen 3 capable */ - if (IS_ENABLED(CONFIG_USB_PD_TBT_GEN3_CAPABLE)) - return false; - return true; - default: - disable_usb4_mode(port); - return false; - } - case PD_REV20: - switch (disc->identity.product_t1.p_rev20.ss) { - case USB_R20_SS_U31_GEN1_GEN2: - /* Check if DFP is Gen 3 capable */ - if (IS_ENABLED(CONFIG_USB_PD_TBT_GEN3_CAPABLE)) - return false; - return true; - default: - disable_usb4_mode(port); - return false; - } - default: - disable_usb4_mode(port); - } - } - return false; -} - void pd_dfp_discovery_init(int port) { memset(&discovery[port], 0, sizeof(struct pd_discovery)); @@ -353,12 +173,6 @@ void pd_dfp_mode_init(int port) memset(&partner_amodes[port], 0, sizeof(partner_amodes[0])); } -static int dfp_discover_ident(uint32_t *payload) -{ - payload[0] = VDO(USB_SID_PD, 1, CMD_DISCOVER_IDENT); - return 1; -} - static int dfp_discover_svids(uint32_t *payload) { payload[0] = VDO(USB_SID_PD, 1, CMD_DISCOVER_SVID); @@ -410,23 +224,6 @@ static int dfp_discover_modes(int port, uint32_t *payload) return 1; } -static bool is_usb4_vdo(int port, int cnt, uint32_t *payload) -{ - enum idh_ptype ptype = PD_IDH_PTYPE(payload[VDO_I(IDH)]); - - if (IS_PD_IDH_UFP_PTYPE(ptype)) { - /* - * Ref: USB Type-C Cable and Connector Specification - * Figure 5-1 USB4 Discovery and Entry Flow Model - * Device USB4 VDO detection. - */ - return IS_ENABLED(CONFIG_USB_PD_USB4) && - is_vdo_present(cnt, VDO_INDEX_PTYPE_UFP1_VDO) && - PD_PRODUCT_IS_USB4(payload[VDO_INDEX_PTYPE_UFP1_VDO]); - } - return false; -} - static int process_am_discover_ident_sop(int port, int cnt, uint32_t head, uint32_t *payload, enum tcpci_msg_type *rtype) @@ -435,29 +232,6 @@ static int process_am_discover_ident_sop(int port, int cnt, uint32_t head, pd_dfp_mode_init(port); dfp_consume_identity(port, TCPCI_MSG_SOP, cnt, payload); - if (IS_ENABLED(CONFIG_USB_PD_DECODE_SOP) && is_sop_prime_ready(port) && - board_is_tbt_usb4_port(port)) { - /* Enable USB4 mode if USB4 VDO present and port partner - * supports USB Rev 3.0. - */ - if (is_usb4_vdo(port, cnt, payload) && - PD_HEADER_REV(head) == PD_REV30) - enable_usb4_mode(port); - - /* - * Enable Thunderbolt-compatible mode if the modal operation is - * supported. - */ - if (is_modal(port, cnt, payload)) - enable_tbt_compat_mode(port); - - if (is_modal(port, cnt, payload) || - is_usb4_vdo(port, cnt, payload)) { - *rtype = TCPCI_MSG_SOP_PRIME; - return dfp_discover_ident(payload); - } - } - return dfp_discover_svids(payload); } @@ -467,31 +241,6 @@ static int process_am_discover_ident_sop_prime(int port, int cnt, uint32_t head, dfp_consume_identity(port, TCPCI_MSG_SOP_PRIME, cnt, payload); cable[port].rev = PD_HEADER_REV(head); - /* - * Enter USB4 mode if the cable supports USB4 operation and has USB4 - * VDO. - */ - if (is_usb4_mode_enabled(port) && - is_cable_ready_to_enter_usb4(port, cnt)) { - enable_enter_usb4_mode(port); - usb_mux_set_safe_mode(port); - /* - * To change the mode of operation from USB4 the port needs to - * be reconfigured. - * Ref: USB Type-C Cable and Connectot Spec section 5.4.4. - */ - disable_tbt_compat_mode(port); - return 0; - } - - /* - * Disable Thunderbolt-compatible mode if the cable does not support - * superspeed. - */ - if (is_tbt_compat_enabled(port) && - get_tbt_cable_speed(port) < TBT_SS_U31_GEN1) - disable_tbt_compat_mode(port); - return dfp_discover_svids(payload); } @@ -506,132 +255,8 @@ static int process_am_discover_svids(int port, int cnt, uint32_t *payload, */ dfp_consume_svids(port, sop, cnt, payload); - /* - * Ref: USB Type-C Cable and Connector Specification, - * figure F-1: TBT3 Discovery Flow - * - * For USB4 mode if device or cable doesn't have Intel SVID, - * disable Thunderbolt-Compatible mode directly enter USB4 mode - * with USB3.2 Gen1/Gen2 speed. - * - * For Thunderbolt-compatible, check if 0x8087 is received for - * Discover SVID SOP. If not, disable Thunderbolt-compatible mode - * - * If 0x8087 is not received for Discover SVID SOP' limit to TBT - * passive Gen 2 cable. - */ - if (is_tbt_compat_enabled(port)) { - bool intel_svid = is_intel_svid(port, sop); - if (!intel_svid) { - if (is_usb4_mode_enabled(port)) { - disable_tbt_compat_mode(port); - cable[port].cable_mode_resp.tbt_cable_speed = - TBT_SS_U32_GEN1_GEN2; - enable_enter_usb4_mode(port); - usb_mux_set_safe_mode(port); - return 0; - } - - if (sop == TCPCI_MSG_SOP_PRIME) - limit_tbt_cable_speed(port); - else - disable_tbt_compat_mode(port); - } else if (sop == TCPCI_MSG_SOP) { - *rtype = TCPCI_MSG_SOP_PRIME; - return dfp_discover_svids(payload); - } - } - return dfp_discover_modes(port, payload); } - -static int process_tbt_compat_discover_modes(int port, enum tcpci_msg_type sop, - uint32_t *payload, - enum tcpci_msg_type *rtype) -{ - int rsize; - - /* Initialize transmit type to SOP */ - *rtype = TCPCI_MSG_SOP; - - /* - * For active cables, Enter mode: SOP', SOP'', SOP - * Ref: USB Type-C Cable and Connector Specification, figure F-1: TBT3 - * Discovery Flow and Section F.2.7 TBT3 Cable Enter Mode Command. - */ - if (sop == TCPCI_MSG_SOP_PRIME) { - /* Store Discover Mode SOP' response */ - cable[port].cable_mode_resp.raw_value = payload[1]; - - if (is_usb4_mode_enabled(port)) { - /* - * If Cable is not Thunderbolt Gen 3 - * capable or Thunderbolt Gen1_Gen2 - * capable, disable USB4 mode and - * continue flow for - * Thunderbolt-compatible mode - */ - if (cable_supports_tbt_speed(port)) { - enable_enter_usb4_mode(port); - usb_mux_set_safe_mode(port); - return 0; - } - disable_usb4_mode(port); - } - - /* - * Send TBT3 Cable Enter Mode (SOP') for active cables, - * otherwise send TBT3 Device Enter Mode (SOP). - */ - if (get_usb_pd_cable_type(port) == IDH_PTYPE_ACABLE) - *rtype = TCPCI_MSG_SOP_PRIME; - - rsize = enter_tbt_compat_mode(port, *rtype, payload); - } else { - /* Store Discover Mode SOP response */ - cable[port].dev_mode_resp.raw_value = payload[1]; - - if (is_limit_tbt_cable_speed(port)) { - /* - * Passive cable has Nacked for Discover SVID. - * No need to do Discover modes of cable. - * Enter into device Thunderbolt-compatible mode. - */ - rsize = enter_tbt_compat_mode(port, *rtype, payload); - } else { - /* Discover modes for SOP' */ - discovery[port][TCPCI_MSG_SOP].svid_idx--; - rsize = dfp_discover_modes(port, payload); - *rtype = TCPCI_MSG_SOP_PRIME; - } - } - - return rsize; -} - -static int obj_cnt_enter_tbt_compat_mode(int port, enum tcpci_msg_type sop, - uint32_t *payload, - enum tcpci_msg_type *rtype) -{ - struct pd_discovery *disc = &discovery[port][TCPCI_MSG_SOP_PRIME]; - - /* Enter mode SOP' for active cables */ - if (sop == TCPCI_MSG_SOP_PRIME) { - /* Check if the cable has a SOP'' controller */ - if (disc->identity.product_t1.a_rev20.sop_p_p) - *rtype = TCPCI_MSG_SOP_PRIME_PRIME; - return enter_tbt_compat_mode(port, *rtype, payload); - } - - /* Enter Mode SOP'' for active cables with SOP'' controller */ - if (sop == TCPCI_MSG_SOP_PRIME_PRIME) - return enter_tbt_compat_mode(port, *rtype, payload); - - /* Update Mux state to Thunderbolt-compatible mode. */ - set_tbt_compat_mode_ready(port); - /* No response once device (and cable) acks */ - return 0; -} #endif /* CONFIG_USB_PD_ALT_MODE_DFP */ int pd_svdm(int port, int cnt, uint32_t *payload, uint32_t **rpayload, @@ -732,22 +357,10 @@ int pd_svdm(int port, int cnt, uint32_t *payload, uint32_t **rpayload, break; case CMD_DISCOVER_MODES: dfp_consume_modes(port, sop, cnt, payload); - if (is_tbt_compat_enabled(port) && - is_tbt_compat_mode(port, cnt, payload)) { - rsize = process_tbt_compat_discover_modes( - port, sop, payload, rtype); - break; - } rsize = dfp_discover_modes(port, payload); /* enter the default mode for DFP */ if (!rsize) { - /* - * Disabling Thunderbolt-Compatible mode if - * discover mode response doesn't include Intel - * SVID. - */ - disable_tbt_compat_mode(port); payload[0] = pd_dfp_enter_mode( port, TCPCI_MSG_SOP, 0, 0); if (payload[0]) @@ -755,14 +368,7 @@ int pd_svdm(int port, int cnt, uint32_t *payload, uint32_t **rpayload, } break; case CMD_ENTER_MODE: - if (is_tbt_compat_enabled(port)) { - rsize = obj_cnt_enter_tbt_compat_mode( - port, sop, payload, rtype); - /* - * Continue with PD flow if - * Thunderbolt-compatible mode is disabled. - */ - } else if (!modep) { + if (!modep) { rsize = 0; } else { if (!modep->opos) @@ -848,14 +454,7 @@ int pd_svdm(int port, int cnt, uint32_t *payload, uint32_t **rpayload, } } else if (cmd_type == CMDT_RSP_NAK) { /* Passive cable Nacked for Discover SVID */ - if (cmd == CMD_DISCOVER_SVID && is_tbt_compat_enabled(port) && - sop == TCPCI_MSG_SOP_PRIME && - get_usb_pd_cable_type(port) == IDH_PTYPE_PCABLE) { - limit_tbt_cable_speed(port); - rsize = dfp_discover_modes(port, payload); - } else { - rsize = 0; - } + rsize = 0; #endif /* CONFIG_USB_PD_ALT_MODE_DFP */ } else { CPRINTF("ERR:CMDT:%d\n", cmd); |