diff options
Diffstat (limited to 'docs/fingerprint/fingerprint-debugging.md')
| -rw-r--r-- | docs/fingerprint/fingerprint-debugging.md | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/docs/fingerprint/fingerprint-debugging.md b/docs/fingerprint/fingerprint-debugging.md index 7316ad3434..56c72f8e3b 100644 --- a/docs/fingerprint/fingerprint-debugging.md +++ b/docs/fingerprint/fingerprint-debugging.md @@ -36,6 +36,7 @@ used for JTAG and SWD for ARM devices. The connector for SWD is `J4` on Dragonclaw v0.2. +<!-- mdformat off(b/139308852) --> *** note **NOTE**: Pay attention to the location of pin 1 (red wire) in the photos below so that you connect with the correct orientation. @@ -45,6 +46,7 @@ photos below so that you connect with the correct orientation. If you want to connect a 20-Pin ARM Standard JTAG Connector (0.10" / 2.54 mm), you can use the following [adapter][JTAG to SWD Adapter] and [cable][SWD Cable]. *** +<!-- mdformat on --> Dragonclaw v0.2 with 20-pin SWD (0.05" / 1.27mm) on J4. Only half the pins are connected. | ----------------------------------------------------------------------------------------- | |