diff options
Diffstat (limited to 'driver/accelgyro_icm426xx.h')
-rw-r--r-- | driver/accelgyro_icm426xx.h | 256 |
1 files changed, 256 insertions, 0 deletions
diff --git a/driver/accelgyro_icm426xx.h b/driver/accelgyro_icm426xx.h new file mode 100644 index 0000000000..0b4e3aa14a --- /dev/null +++ b/driver/accelgyro_icm426xx.h @@ -0,0 +1,256 @@ +/* Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* ICM-426xx accelerometer and gyroscope for Chrome EC */ + +#ifndef __CROS_EC_ACCELGYRO_ICM426XX_H +#define __CROS_EC_ACCELGYRO_ICM426XX_H + +#include "accelgyro.h" +#include "common.h" + +/* + * 7-bit address is 110100Xb. Where 'X' is determined + * by the logic level on pin AP_AD0. + */ +#define ICM426XX_ADDR0_FLAGS 0x68 +#define ICM426XX_ADDR1_FLAGS 0x69 + +/* Min and Max sampling frequency in mHz */ +#define ICM426XX_ACCEL_MIN_FREQ 3125 +#define ICM426XX_ACCEL_MAX_FREQ MOTION_MAX_SENSOR_FREQUENCY(500000, 100000) +#define ICM426XX_GYRO_MIN_FREQ 12500 +#define ICM426XX_GYRO_MAX_FREQ MOTION_MAX_SENSOR_FREQUENCY(4000000, 100000) + +/* Min and Max Accel FS in G */ +#define ICM426XX_ACCEL_FS_MIN_VAL 2 +#define ICM426XX_ACCEL_FS_MAX_VAL 16 + +/* Min and Max Gyro FS in dps */ +#define ICM426XX_GYRO_FS_MIN_VAL 125 +#define ICM426XX_GYRO_FS_MAX_VAL 2000 + +/* Reg value from Accel FS in G */ +#define ICM426XX_ACCEL_FS_TO_REG(_fs) ((_fs) < 2 ? 3 : \ + (_fs) > 16 ? 0 : \ + 3 - __fls((_fs) / 2)) + +/* Accel FSR in G from Reg value */ +#define ICM426XX_ACCEL_REG_TO_FS(_reg) ((1 << (3 - (_reg))) * 2) + +/* Reg value from Gyro FS in dps */ +#define ICM426XX_GYRO_FS_TO_REG(_fs) ((_fs) < 125 ? 4 : \ + (_fs) > 2000 ? 0 : \ + 4 - __fls((_fs) / 125)) + +/* Gyro FSR in dps from Reg value */ +#define ICM426XX_GYRO_REG_TO_FS(_reg) ((1 << (4 - (_reg))) * 125) + +/* Reg value from ODR in mHz */ +#define ICM426XX_ODR_TO_REG(_odr) ((_odr) <= 200000 ? \ + 13 - __fls((_odr) / 3125) : \ + (_odr) < 500000 ? 7 : \ + (_odr) < 1000000 ? 15 : \ + 6 - __fls((_odr) / 1000000)) + +/* ODR in mHz from Reg value */ +#define ICM426XX_REG_TO_ODR(_reg) ((_reg) == 15 ? 500000 : \ + (_reg) >= 7 ? \ + (1 << (13 - (_reg))) * 3125 : \ + (1 << (6 - (_reg))) * 1000000) + +/* Reg value for the next higher ODR */ +#define ICM426XX_ODR_REG_UP(_reg) ((_reg) == 15 ? 6 : \ + (_reg) == 7 ? 15 : \ + (_reg) - 1) + +/* + * Register addresses are virtual address on 16 bits. + * MSB is coding register bank and LSB real register address. + * ex: bank 4, register 1F => 0x041F + */ +#define ICM426XX_REG_DEVICE_CONFIG 0x0011 +#define ICM426XX_SOFT_RESET_CONFIG BIT(0) + +enum icm426xx_slew_rate { + ICM426XX_SLEW_RATE_20NS_60NS, + ICM426XX_SLEW_RATE_12NS_36NS, + ICM426XX_SLEW_RATE_6NS_18NS, + ICM426XX_SLEW_RATE_4NS_12NS, + ICM426XX_SLEW_RATE_2NS_6NS, + ICM426XX_SLEW_RATE_INF_2NS, +}; +#define ICM426XX_REG_DRIVE_CONFIG 0x0013 +#define ICM426XX_DRIVE_CONFIG_MASK GENMASK(5, 0) +#define ICM426XX_I2C_SLEW_RATE(_s) (((_s) & 0x07) << 3) +#define ICM426XX_SPI_SLEW_RATE(_s) ((_s) & 0x07) + +/* default int configuration is pulsed mode, open drain, and active low */ +#define ICM426XX_REG_INT_CONFIG 0x0014 +#define ICM426XX_INT2_LATCHED BIT(5) +#define ICM426XX_INT2_PUSH_PULL BIT(4) +#define ICM426XX_INT2_ACTIVE_HIGH BIT(3) +#define ICM426XX_INT1_LATCHED BIT(2) +#define ICM426XX_INT1_PUSH_PULL BIT(1) +#define ICM426XX_INT1_ACTIVE_HIGH BIT(0) + +#define ICM426XX_REG_FIFO_CONFIG 0x0016 +#define ICM426XX_FIFO_MODE_BYPASS (0x00 << 6) +#define ICM426XX_FIFO_MODE_STREAM (0x01 << 6) +#define ICM426XX_FIFO_MODE_STOP_FULL (0x02 << 6) + +/* data are 16 bits */ +#define ICM426XX_REG_TEMP_DATA 0x001D +/* X + Y + Z: 3 * 16 bits */ +#define ICM426XX_REG_ACCEL_DATA_XYZ 0x001F +#define ICM426XX_REG_GYRO_DATA_XYZ 0x0025 + +#define ICM426XX_INVALID_DATA -32768 + +#define ICM426XX_REG_INT_STATUS 0x002D +#define ICM426XX_UI_FSYNC_INT BIT(6) +#define ICM426XX_PLL_RDY_INT BIT(5) +#define ICM426XX_RESET_DONE_INT BIT(4) +#define ICM426XX_DATA_RDY_INT BIT(3) +#define ICM426XX_FIFO_THS_INT BIT(2) +#define ICM426XX_FIFO_FULL_INT BIT(1) +#define ICM426XX_AGC_RDY_INT BIT(0) + +/* FIFO count is 16 bits */ +#define ICM426XX_REG_FIFO_COUNT 0x002E +#define ICM426XX_REG_FIFO_DATA 0x0030 + +#define ICM426XX_REG_SIGNAL_PATH_RESET 0x004B +#define ICM426XX_ABORT_AND_RESET BIT(3) +#define ICM426XX_TMST_STROBE BIT(2) +#define ICM426XX_FIFO_FLUSH BIT(1) + +#define ICM426XX_REG_INTF_CONFIG0 0x004C +#define ICM426XX_DATA_CONF_MASK GENMASK(7, 4) +#define ICM426XX_FIFO_HOLD_LAST_DATA BIT(7) +#define ICM426XX_FIFO_COUNT_REC BIT(6) +#define ICM426XX_FIFO_COUNT_BE BIT(5) +#define ICM426XX_SENSOR_DATA_BE BIT(4) +#define ICM426XX_UI_SIFS_CFG_MASK GENMASK(1, 0) +#define ICM426XX_UI_SIFS_CFG_SPI_DIS 0x02 +#define ICM426XX_UI_SIFS_CFG_I2C_DIS 0x03 + +enum icm426xx_sensor_mode { + ICM426XX_MODE_OFF, + ICM426XX_MODE_STANDBY, + ICM426XX_MODE_LOW_POWER, + ICM426XX_MODE_LOW_NOISE, +}; +#define ICM426XX_REG_PWR_MGMT0 0x004E +#define ICM426XX_TEMP_DIS BIT(5) +#define ICM426XX_IDLE BIT(4) +#define ICM426XX_GYRO_MODE_MASK GENMASK(3, 2) +#define ICM426XX_GYRO_MODE(_m) (((_m) & 0x03) << 2) +#define ICM426XX_ACCEL_MODE_MASK GENMASK(1, 0) +#define ICM426XX_ACCEL_MODE(_m) ((_m) & 0x03) + +#define ICM426XX_REG_GYRO_CONFIG0 0x004F +#define ICM426XX_REG_ACCEL_CONFIG0 0x0050 +#define ICM426XX_FS_MASK GENMASK(7, 5) +#define ICM426XX_FS_SEL(_fs) (((_fs) & 0x07) << 5) +#define ICM426XX_ODR_MASK GENMASK(3, 0) +#define ICM426XX_ODR(_odr) ((_odr) & 0x0F) + +enum icm426xx_filter_bw { + /* low noise mode */ + ICM426XX_FILTER_BW_ODR_DIV_2 = 0, + + /* low power mode */ + ICM426XX_FILTER_BW_AVG_1X = 1, + ICM426XX_FILTER_BW_AVG_16X = 6, +}; + +#define ICM426XX_REG_GYRO_ACCEL_CONFIG0 0x0052 +#define ICM426XX_ACCEL_UI_FILT_MASK GENMASK(7, 4) +#define ICM426XX_ACCEL_UI_FILT_BW(_f) (((_f) & 0x0F) << 4) +#define ICM426XX_GYRO_UI_FILT_MASK GENMASK(3, 0) +#define ICM426XX_GYRO_UI_FILT_BW(_f) ((_f) & 0x0F) + +#define ICM426XX_REG_FIFO_CONFIG1 0x005F +#define ICM426XX_FIFO_PARTIAL_READ BIT(6) +#define ICM426XX_FIFO_WM_GT_TH BIT(5) +#define ICM426XX_FIFO_EN_MASK GENMASK(3, 0) +#define ICM426XX_FIFO_TMST_FSYNC_EN BIT(3) +#define ICM426XX_FIFO_TEMP_EN BIT(2) +#define ICM426XX_FIFO_GYRO_EN BIT(1) +#define ICM426XX_FIFO_ACCEL_EN BIT(0) + +/* FIFO watermark value is 16 bits little endian */ +#define ICM426XX_REG_FIFO_WATERMARK 0x0060 + +#define ICM426XX_REG_INT_CONFIG1 0x0064 +#define ICM426XX_INT_PULSE_DURATION BIT(6) +#define ICM426XX_INT_TDEASSERT_DIS BIT(5) +#define ICM426XX_INT_ASYNC_RESET BIT(4) + +#define ICM426XX_REG_INT_SOURCE0 0x0065 +#define ICM426XX_UI_FSYNC_INT1_EN BIT(6) +#define ICM426XX_PLL_RDY_INT1_EN BIT(5) +#define ICM426XX_RESET_DONE_INT1_EN BIT(4) +#define ICM426XX_UI_DRDY_INT1_EN BIT(3) +#define ICM426XX_FIFO_THS_INT1_EN BIT(2) +#define ICM426XX_FIFO_FULL_INT1_EN BIT(1) +#define ICM426XX_UI_AGC_RDY_INT1_EN BIT(0) + +#define ICM426XX_REG_INT_SOURCE3 0x0068 +#define ICM426XX_UI_FSYNC_INT2_EN BIT(6) +#define ICM426XX_PLL_RDY_INT2_EN BIT(5) +#define ICM426XX_RESET_DONE_INT2_EN BIT(4) +#define ICM426XX_UI_DRDY_INT2_EN BIT(3) +#define ICM426XX_FIFO_THS_INT2_EN BIT(2) +#define ICM426XX_FIFO_FULL_INT2_EN BIT(1) +#define ICM426XX_UI_AGC_RDY_INT2_EN BIT(0) + +#define ICM426XX_REG_WHO_AM_I 0x0075 +#define ICM426XX_CHIP_ICM40608 0x39 +#define ICM426XX_CHIP_ICM42605 0x42 + +#define ICM426XX_REG_BANK_SEL 0x0076 +#define ICM426XX_BANK_SEL(_b) ((_b) & 0x07) + +#define ICM426XX_REG_INTF_CONFIG4 0x017A +#define ICM426XX_I3C_BUS_MODE BIT(6) +#define ICM426XX_SPI_AP_4WIRE BIT(1) + +#define ICM426XX_REG_INTF_CONFIG5 0x017B +#define ICM426XX_PIN9_FUNC_INT2 (0x00 << 1) +#define ICM426XX_PIN9_FUNC_FSYNC (0x01 << 1) + +#define ICM426XX_REG_INTF_CONFIG6 0x017C +#define ICM426XX_INTF_CONFIG6_MASK GENMASK(4, 0) +#define ICM426XX_I3C_EN BIT(4) +#define ICM426XX_I3C_IBI_BYTE_EN BIT(3) +#define ICM426XX_I3C_IBI_EN BIT(2) +#define ICM426XX_I3C_DDR_EN BIT(1) +#define ICM426XX_I3C_SDR_EN BIT(0) + +#define ICM426XX_REG_INT_SOURCE8 0x044F +#define ICM426XX_FSYNC_IBI_EN BIT(5) +#define ICM426XX_PLL_RDY_IBI_EN BIT(4) +#define ICM426XX_UI_DRDY_IBI_EN BIT(3) +#define ICM426XX_FIFO_THS_IBI_EN BIT(2) +#define ICM426XX_FIFO_FULL_IBI_EN BIT(1) +#define ICM426XX_AGC_RDY_IBI_EN BIT(0) + +#define ICM426XX_REG_OFFSET_USER0 0x0477 +#define ICM426XX_REG_OFFSET_USER1 0x0478 +#define ICM426XX_REG_OFFSET_USER2 0x0479 +#define ICM426XX_REG_OFFSET_USER3 0x047A +#define ICM426XX_REG_OFFSET_USER4 0x047B +#define ICM426XX_REG_OFFSET_USER5 0x047C +#define ICM426XX_REG_OFFSET_USER6 0x047D +#define ICM426XX_REG_OFFSET_USER7 0x047E +#define ICM426XX_REG_OFFSET_USER8 0x047F + +extern const struct accelgyro_drv icm426xx_drv; + +void icm426xx_interrupt(enum gpio_signal signal); + +#endif /* __CROS_EC_ACCELGYRO_ICM426XX_H */ |