diff options
Diffstat (limited to 'driver/ppc/sn5s330.h')
-rw-r--r-- | driver/ppc/sn5s330.h | 161 |
1 files changed, 0 insertions, 161 deletions
diff --git a/driver/ppc/sn5s330.h b/driver/ppc/sn5s330.h deleted file mode 100644 index f94a3e8e10..0000000000 --- a/driver/ppc/sn5s330.h +++ /dev/null @@ -1,161 +0,0 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* TI SN5S330 Type-C Power Path Controller */ - -#ifndef __CROS_EC_SN5S330_H -#define __CROS_EC_SN5S330_H - -#include "common.h" - -#include "driver/ppc/sn5s330_public.h" - -struct sn5s330_config { - uint8_t i2c_port; - uint8_t i2c_addr_flags; -}; - -extern const struct sn5s330_config sn5s330_chips[]; -extern const unsigned int sn5s330_cnt; - -/* Power Path Indices */ -enum sn5s330_pp_idx { - SN5S330_PP1, - SN5S330_PP2, - SN5S330_PP_COUNT, -}; - -#define SN5S330_FUNC_SET1 0x50 -#define SN5S330_FUNC_SET2 0x51 -#define SN5S330_FUNC_SET3 0x52 -#define SN5S330_FUNC_SET4 0x53 -#define SN5S330_FUNC_SET5 0x54 -#define SN5S330_FUNC_SET6 0x55 -#define SN5S330_FUNC_SET7 0x56 -#define SN5S330_FUNC_SET8 0x57 -#define SN5S330_FUNC_SET9 0x58 -#define SN5S330_FUNC_SET10 0x59 -#define SN5S330_FUNC_SET11 0x5A -#define SN5S330_FUNC_SET12 0x5B - -#define SN5S330_INT_STATUS_REG1 0x2F -#define SN5S330_INT_STATUS_REG2 0x30 -#define SN5S330_INT_STATUS_REG3 0x31 -#define SN5S330_INT_STATUS_REG4 0x32 - -#define SN5S330_INT_TRIP_RISE_REG1 0x20 -#define SN5S330_INT_TRIP_RISE_REG2 0x21 -#define SN5S330_INT_TRIP_RISE_REG3 0x22 -#define SN5S330_INT_TRIP_FALL_REG1 0x23 -#define SN5S330_INT_TRIP_FALL_REG2 0x24 -#define SN5S330_INT_TRIP_FALL_REG3 0x25 - -#define SN5S330_INT_MASK_RISE_REG1 0x26 -#define SN5S330_INT_MASK_RISE_REG2 0x27 -#define SN5S330_INT_MASK_RISE_REG3 0x28 -#define SN5S330_INT_MASK_FALL_REG1 0x29 -#define SN5S330_INT_MASK_FALL_REG2 0x2A -#define SN5S330_INT_MASK_FALL_REG3 0x2B - -#define PPX_ILIM_DEGLITCH_0_US_20 0x1 -#define PPX_ILIM_DEGLITCH_0_US_50 0x2 -#define PPX_ILIM_DEGLITCH_0_US_100 0x3 -#define PPX_ILIM_DEGLITCH_0_US_200 0x4 -#define PPX_ILIM_DEGLITCH_0_US_1000 0x5 -#define PPX_ILIM_DEGLITCH_0_US_2000 0x6 -#define PPX_ILIM_DEGLITCH_0_US_10000 0x7 - -/* Internal VBUS Switch Current Limit Settings (min) */ -#define SN5S330_ILIM_0_35 0 -#define SN5S330_ILIM_0_63 1 -#define SN5S330_ILIM_0_90 2 -#define SN5S330_ILIM_1_14 3 -#define SN5S330_ILIM_1_38 4 -#define SN5S330_ILIM_1_62 5 -#define SN5S330_ILIM_1_86 6 -#define SN5S330_ILIM_2_10 7 -#define SN5S330_ILIM_2_34 8 -#define SN5S330_ILIM_2_58 9 -#define SN5S330_ILIM_2_82 10 -#define SN5S330_ILIM_3_06 11 -#define SN5S330_ILIM_3_30 12 - -/* FUNC_SET_2 */ -#define SN5S330_SBU_EN BIT(4) - -/* FUNC_SET_3 */ -#define SN5S330_PP1_EN BIT(0) -#define SN5S330_PP2_EN BIT(1) -#define SN5S330_VBUS_DISCH_EN BIT(2) -#define SN5S330_SET_RCP_MODE_PP1 BIT(5) -#define SN5S330_SET_RCP_MODE_PP2 BIT(6) - -/* FUNC_SET_4 */ -#define SN5S330_VCONN_EN BIT(0) -#define SN5S330_CC_POLARITY BIT(1) -#define SN5S330_CC_EN BIT(4) -#define SN5S330_VCONN_ILIM_SEL BIT(5) - -/* FUNC_SET_8 */ -#define SN5S330_VCONN_DEGLITCH_MASK (3 << 6) -#define SN5S330_VCONN_DEGLITCH_63_US (0 << 6) -#define SN5S330_VCONN_DEGLITCH_125_US BIT(6) -#define SN5S330_VCONN_DEGLITCH_640_US (2 << 6) -#define SN5S330_VCONN_DEGLITCH_1280_US (3 << 6) - -/* FUNC_SET_9 */ -#define SN5S330_FORCE_OVP_EN_SBU BIT(1) -#define SN5S330_PP2_CONFIG BIT(2) -#define SN5S330_OVP_EN_CC BIT(4) -#define SN5S330_CONFIG_UVP BIT(5) -#define SN5S330_FORCE_ON_VBUS_OVP BIT(6) -#define SN5S330_FORCE_ON_VBUS_UVP BIT(7) - -/* INT_STATUS_REG3 */ -#define SN5S330_VBUS_GOOD BIT(0) - -/* INT_STATUS_REG4 */ -#define SN5S330_DIG_RES BIT(0) -#define SN5S330_DB_BOOT BIT(1) -#define SN5S330_VSAFE0V_STAT BIT(2) -#define SN5S330_VSAFE0V_MASK BIT(3) - -/* - * INT_MASK_RISE/FALL_EDGE_1 - * - * The ILIM_PP1 bit indicates an overcurrent condition when sourcing on power - * path 1. For rising edge registers, this indicates an overcurrent has - * occured; similarly for falling edge, it means the overcurrent condition is no - * longer present. - */ -#define SN5S330_ILIM_PP1_MASK BIT(4) - -/* - * INT_MASK_RISE/FALL_EDGE2 - * - * The VCONN_ILIM bit indicates an overcurrent condition on VCONN. By default, - * VCONN will be latched off. - */ -#define SN5S330_VCONN_ILIM (1 << 1) - -/* - * INT_MASK_RISE/FALL_EDGE2 - * - * The OV_CC1_CON/OV_CC2_CON bit indicates an over-voltage occurred on - * C_CC1/C_CC2. - */ -#define SN5S330_CC1_CON (1 << 2) -#define SN5S330_CC2_CON (1 << 3) - -/* - * INT_MASK_RISE/FALL_EDGE_3 - * - * The VBUS_GOOD bit indicates VBUS has increased beyond a 4.0V threshold. - * For rising edge registers, this indicates VBUS has risen above 4.0V. - * For falling edge registers, this indicates VBUS has fallen below 4.0V. - */ -#define SN5S330_VBUS_GOOD_MASK BIT(0) - -#endif /* defined(__CROS_EC_SN5S330_H) */ |