diff options
Diffstat (limited to 'driver/tcpm/it8xxx2.c')
| -rw-r--r-- | driver/tcpm/it8xxx2.c | 23 |
1 files changed, 16 insertions, 7 deletions
diff --git a/driver/tcpm/it8xxx2.c b/driver/tcpm/it8xxx2.c index e3227a3ed8..dd5d1231fc 100644 --- a/driver/tcpm/it8xxx2.c +++ b/driver/tcpm/it8xxx2.c @@ -527,12 +527,21 @@ static int it8xxx2_tcpm_set_vconn(int port, int enable) /* Enable tcpc receive SOP' and SOP'' packet */ it8xxx2_tcpm_decode_sop_prime_enable(port, true); - } - /* Turn on/off vconn power switch. */ - board_pd_vconn_ctrl(port, - USBPD_GET_PULL_CC_SELECTION(port) ? - USBPD_CC_PIN_2 : USBPD_CC_PIN_1, enable); - if (!enable) { + /* Turn on Vconn power switch. */ + board_pd_vconn_ctrl(port, + USBPD_GET_PULL_CC_SELECTION(port) ? + USBPD_CC_PIN_2 : USBPD_CC_PIN_1, + enable); + } else { + /* + * If the pd port has previous connection and supplies + * Vconn, then RO jumping to RW reset the system, + * we never know which cc is the previous Vconn pin, + * so we always turn both cc pins off when disable + * Vconn power switch. + */ + board_pd_vconn_ctrl(port, USBPD_CC_PIN_1, enable); + board_pd_vconn_ctrl(port, USBPD_CC_PIN_2, enable); if (IS_ENABLED(CONFIG_USB_PD_DECODE_SOP)) /* Disable tcpc receive SOP' and SOP'' packet */ it8xxx2_tcpm_decode_sop_prime_enable(port, @@ -792,7 +801,7 @@ static void it8xxx2_init(enum usbpd_port port, int role) /* Set default power role and assert Rp/Rd */ it8xxx2_set_power_role(port, role); /* Disable vconn: connect cc analog module, disable cc 5v tolerant */ - it8xxx2_enable_vconn(port, 0); + it8xxx2_tcpm_set_vconn(port, 0); /* Enable tx done and hard reset detect interrupt */ IT83XX_USBPD_IMR(port) &= ~(USBPD_REG_MASK_MSG_TX_DONE | USBPD_REG_MASK_HARD_RESET_DETECT); |