diff options
Diffstat (limited to 'driver/temp_sensor/adt7481.h')
| -rw-r--r-- | driver/temp_sensor/adt7481.h | 52 |
1 files changed, 26 insertions, 26 deletions
diff --git a/driver/temp_sensor/adt7481.h b/driver/temp_sensor/adt7481.h index 11e9856b9c..45da88560e 100644 --- a/driver/temp_sensor/adt7481.h +++ b/driver/temp_sensor/adt7481.h @@ -55,18 +55,18 @@ #define ADT7481_MANUFACTURER_ID 0x3e /* Config1 register bits */ -#define ADT7481_CONFIG1_REMOTE1_ALERT_MASK (1 << 0) -#define ADT7481_CONFIG1_REMOTE2_ALERT_MASK (1 << 1) -#define ADT7481_CONFIG1_TEMP_RANGE (1 << 2) -#define ADT7481_CONFIG1_SEL_REMOTE2 (1 << 3) +#define ADT7481_CONFIG1_REMOTE1_ALERT_MASK BIT(0) +#define ADT7481_CONFIG1_REMOTE2_ALERT_MASK BIT(1) +#define ADT7481_CONFIG1_TEMP_RANGE BIT(2) +#define ADT7481_CONFIG1_SEL_REMOTE2 BIT(3) /* ADT7481_CONFIG1_MODE bit is use to enable THERM mode */ -#define ADT7481_CONFIG1_MODE (1 << 5) -#define ADT7481_CONFIG1_RUN_L (1 << 6) +#define ADT7481_CONFIG1_MODE BIT(5) +#define ADT7481_CONFIG1_RUN_L BIT(6) /* mask all alerts on ALERT# pin */ -#define ADT7481_CONFIG1_ALERT_MASK_L (1 << 7) +#define ADT7481_CONFIG1_ALERT_MASK_L BIT(7) /* Config2 register bits */ -#define ADT7481_CONFIG2_LOCK (1 << 7) +#define ADT7481_CONFIG2_LOCK BIT(7) /* Conversion Rate/Channel Select Register */ #define ADT7481_CONV_RATE_MASK (0x0f) @@ -85,28 +85,28 @@ #define ADT7481_CONV_RATE_73MS_AVE (0x0b) #define ADT7481_CONV_CHAN_SELECT_MASK (0x30) #define ADT7481_CONV_CHAN_SEL_ROUND_ROBIN (0 << 4) -#define ADT7481_CONV_CHAN_SEL_LOCAL (1 << 4) +#define ADT7481_CONV_CHAN_SEL_LOCAL BIT(4) #define ADT7481_CONV_CHAN_SEL_REMOTE1 (2 << 4) #define ADT7481_CONV_CHAN_SEL_REMOTE2 (3 << 4) -#define ADT7481_CONV_AVERAGING_L (1 << 7) +#define ADT7481_CONV_AVERAGING_L BIT(7) /* Status1 register bits */ -#define ADT7481_STATUS1_LOCAL_THERM_ALARM (1 << 0) -#define ADT7481_STATUS1_REMOTE1_THERM_ALARM (1 << 1) -#define ADT7481_STATUS1_REMOTE1_OPEN (1 << 2) -#define ADT7481_STATUS1_REMOTE1_LOW_ALARM (1 << 3) -#define ADT7481_STATUS1_REMOTE1_HIGH_ALARM (1 << 4) -#define ADT7481_STATUS1_LOCAL_LOW_ALARM (1 << 5) -#define ADT7481_STATUS1_LOCAL_HIGH_ALARM (1 << 6) -#define ADT7481_STATUS1_BUSY (1 << 7) +#define ADT7481_STATUS1_LOCAL_THERM_ALARM BIT(0) +#define ADT7481_STATUS1_REMOTE1_THERM_ALARM BIT(1) +#define ADT7481_STATUS1_REMOTE1_OPEN BIT(2) +#define ADT7481_STATUS1_REMOTE1_LOW_ALARM BIT(3) +#define ADT7481_STATUS1_REMOTE1_HIGH_ALARM BIT(4) +#define ADT7481_STATUS1_LOCAL_LOW_ALARM BIT(5) +#define ADT7481_STATUS1_LOCAL_HIGH_ALARM BIT(6) +#define ADT7481_STATUS1_BUSY BIT(7) /* Status2 register bits */ -#define ADT7481_STATUS2_ALERT (1 << 0) -#define ADT7481_STATUS2_REMOTE2_THERM_ALARM (1 << 1) -#define ADT7481_STATUS2_REMOTE2_OPEN (1 << 2) -#define ADT7481_STATUS2_REMOTE2_LOW_ALARM (1 << 3) -#define ADT7481_STATUS2_REMOTE2_HIGH_ALARM (1 << 4) +#define ADT7481_STATUS2_ALERT BIT(0) +#define ADT7481_STATUS2_REMOTE2_THERM_ALARM BIT(1) +#define ADT7481_STATUS2_REMOTE2_OPEN BIT(2) +#define ADT7481_STATUS2_REMOTE2_LOW_ALARM BIT(3) +#define ADT7481_STATUS2_REMOTE2_HIGH_ALARM BIT(4) /* Consecutive Alert register */ #define ADT7481_CONSEC_MASK (0xf) @@ -114,9 +114,9 @@ #define ADT7481_CONSEC_2 (0x2) #define ADT7481_CONSEC_3 (0x6) #define ADT7481_CONSEC_4 (0xe) -#define ADT7481_CONSEC_EN_SCL_TIMEOUT (1 << 5) -#define ADT7481_CONSEC_EN_SDA_TIMEOUT (1 << 6) -#define ADT7481_CONSEC_MASK_LOCAL_ALERT (1 << 7) +#define ADT7481_CONSEC_EN_SCL_TIMEOUT BIT(5) +#define ADT7481_CONSEC_EN_SDA_TIMEOUT BIT(6) +#define ADT7481_CONSEC_MASK_LOCAL_ALERT BIT(7) /* Limits */ |