diff options
Diffstat (limited to 'driver')
| -rw-r--r-- | driver/charger/sm5803.c | 2 | ||||
| -rw-r--r-- | driver/ppc/aoz1380.c | 4 | ||||
| -rw-r--r-- | driver/ppc/nx20p348x.c | 2 | ||||
| -rw-r--r-- | driver/ppc/sn5s330.c | 2 | ||||
| -rw-r--r-- | driver/tcpm/tcpci.c | 4 | ||||
| -rw-r--r-- | driver/usb_mux/usb_mux.c | 2 |
6 files changed, 8 insertions, 8 deletions
diff --git a/driver/charger/sm5803.c b/driver/charger/sm5803.c index 43a54d798b..36c4e705c2 100644 --- a/driver/charger/sm5803.c +++ b/driver/charger/sm5803.c @@ -48,7 +48,7 @@ static const struct charger_info sm5803_charger_info = { .input_current_step = INPUT_I_STEP, }; -static uint32_t irq_pending; /* Bitmask of chips with interrupts pending */ +static atomic_t irq_pending; /* Bitmask of chips with interrupts pending */ static struct mutex flow1_access_lock[CHARGER_NUM]; static struct mutex flow2_access_lock[CHARGER_NUM]; diff --git a/driver/ppc/aoz1380.c b/driver/ppc/aoz1380.c index 935503b593..726f626caf 100644 --- a/driver/ppc/aoz1380.c +++ b/driver/ppc/aoz1380.c @@ -25,12 +25,12 @@ #define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) #define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) -static uint32_t irq_pending; /* Bitmask of ports signaling an interrupt. */ +static atomic_t irq_pending; /* Bitmask of ports signaling an interrupt. */ #define AOZ1380_FLAGS_SOURCE_ENABLED BIT(0) #define AOZ1380_FLAGS_SINK_ENABLED BIT(1) #define AOZ1380_FLAGS_INT_ON_DISCONNECT BIT(2) -static uint32_t flags[CONFIG_USB_PD_PORT_MAX_COUNT]; +static atomic_t flags[CONFIG_USB_PD_PORT_MAX_COUNT]; #define AOZ1380_SET_FLAG(port, flag) atomic_or(&flags[port], (flag)) #define AOZ1380_CLR_FLAG(port, flag) atomic_clear_bits(&flags[port], (flag)) diff --git a/driver/ppc/nx20p348x.c b/driver/ppc/nx20p348x.c index b582259e04..130678d512 100644 --- a/driver/ppc/nx20p348x.c +++ b/driver/ppc/nx20p348x.c @@ -22,7 +22,7 @@ #define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) #define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) -static uint32_t irq_pending; /* Bitmask of ports signaling an interrupt. */ +static atomic_t irq_pending; /* Bitmask of ports signaling an interrupt. */ #define NX20P348X_DB_EXIT_FAIL_THRESHOLD 10 static int db_exit_fail_count[CONFIG_USB_PD_PORT_MAX_COUNT]; diff --git a/driver/ppc/sn5s330.c b/driver/ppc/sn5s330.c index c45340250d..0e5934533e 100644 --- a/driver/ppc/sn5s330.c +++ b/driver/ppc/sn5s330.c @@ -26,7 +26,7 @@ #define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) #define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) -static uint32_t irq_pending; /* Bitmask of ports signaling an interrupt. */ +static atomic_t irq_pending; /* Bitmask of ports signaling an interrupt. */ static int source_enabled[CONFIG_USB_PD_PORT_MAX_COUNT]; static int read_reg(uint8_t port, int reg, int *regval) diff --git a/driver/tcpm/tcpci.c b/driver/tcpm/tcpci.c index 359cb04d30..b04d7be1af 100644 --- a/driver/tcpm/tcpci.c +++ b/driver/tcpm/tcpci.c @@ -877,12 +877,12 @@ struct queue { * Head points to the index of the first empty slot to put a new RX * message. Must be masked before used in lookup. */ - uint32_t head; + atomic_t head; /* * Tail points to the index of the first message for the PD task to * consume. Must be masked before used in lookup. */ - uint32_t tail; + atomic_t tail; struct cached_tcpm_message buffer[CACHE_DEPTH]; }; static struct queue cached_messages[CONFIG_USB_PD_PORT_MAX_COUNT]; diff --git a/driver/usb_mux/usb_mux.c b/driver/usb_mux/usb_mux.c index c53a21ce65..4095846c30 100644 --- a/driver/usb_mux/usb_mux.c +++ b/driver/usb_mux/usb_mux.c @@ -32,7 +32,7 @@ static int enable_debug_prints; * Flags will reset to 0 after sysjump; This works for current flags as LPM will * get reset in the init method which is called during PD task startup. */ -static uint32_t flags[CONFIG_USB_PD_PORT_MAX_COUNT]; +static atomic_t flags[CONFIG_USB_PD_PORT_MAX_COUNT]; /* Device is in low power mode. */ #define USB_MUX_FLAG_IN_LPM BIT(0) |