1 files changed, 83 insertions, 0 deletions
diff --git a/include/ec_commands.h b/include/ec_commands.h
index d141996c41..49e861b151 100644
--- a/include/ec_commands.h
+++ b/include/ec_commands.h
@@ -6181,6 +6181,89 @@ struct ec_response_smart_discharge {
 };
 
 /*****************************************************************************/
+/* Voltage regulator controls */
+
+/*
+ * Get basic info of voltage regulator for given index.
+ *
+ * Returns the regulator name and supported voltage list in mV.
+ */
+#define EC_CMD_REGULATOR_GET_INFO 0x012C
+
+/* Maximum length of regulator name */
+#define EC_REGULATOR_NAME_MAX_LEN 16
+
+/* Maximum length of the supported voltage list. */
+#define EC_REGULATOR_VOLTAGE_MAX_COUNT 16
+
+struct ec_params_regulator_get_info {
+	uint32_t index;
+} __ec_align4;
+
+struct ec_response_regulator_get_info {
+	char name[EC_REGULATOR_NAME_MAX_LEN];
+	uint16_t num_voltages;
+	uint16_t voltages_mv[EC_REGULATOR_VOLTAGE_MAX_COUNT];
+} __ec_align2;
+
+/*
+ * Configure the regulator as enabled / disabled.
+ */
+#define EC_CMD_REGULATOR_ENABLE 0x012D
+
+struct ec_params_regulator_enable {
+	uint32_t index;
+	uint8_t enable;
+} __ec_align4;
+
+/*
+ * Query if the regulator is enabled.
+ *
+ * Returns 1 if the regulator is enabled, 0 if not.
+ */
+#define EC_CMD_REGULATOR_IS_ENABLED 0x012E
+
+struct ec_params_regulator_is_enabled {
+	uint32_t index;
+} __ec_align4;
+
+struct ec_response_regulator_is_enabled {
+	uint8_t enabled;
+} __ec_align1;
+
+/*
+ * Set voltage for the voltage regulator within the range specified.
+ *
+ * The driver should select the voltage in range closest to min_mv.
+ *
+ * Also note that this might be called before the regulator is enabled, and the
+ * setting should be in effect after the regulator is enabled.
+ */
+#define EC_CMD_REGULATOR_SET_VOLTAGE 0x012F
+
+struct ec_params_regulator_set_voltage {
+	uint32_t index;
+	uint32_t min_mv;
+	uint32_t max_mv;
+} __ec_align4;
+
+/*
+ * Get the currently configured voltage for the voltage regulator.
+ *
+ * Note that this might be called before the regulator is enabled, and this
+ * should return the configured output voltage if the regulator is enabled.
+ */
+#define EC_CMD_REGULATOR_GET_VOLTAGE 0x0130
+
+struct ec_params_regulator_get_voltage {
+	uint32_t index;
+} __ec_align4;
+
+struct ec_response_regulator_get_voltage {
+	uint32_t voltage_mv;
+} __ec_align4;
+
+/*****************************************************************************/
 /* The command range 0x200-0x2FF is reserved for Rotor. */
 
 /*****************************************************************************/