diff options
Diffstat (limited to 'include/flash.h')
-rw-r--r-- | include/flash.h | 49 |
1 files changed, 49 insertions, 0 deletions
diff --git a/include/flash.h b/include/flash.h index fe592e3478..8969a56c8b 100644 --- a/include/flash.h +++ b/include/flash.h @@ -11,6 +11,23 @@ #include "common.h" #include "ec_commands.h" /* For EC_FLASH_PROTECT_* flags */ +/* Number of physical flash banks */ +#define PHYSICAL_BANKS (CONFIG_FLASH_PHYSICAL_SIZE / CONFIG_FLASH_BANK_SIZE) + +/* Read-only firmware offset and size in units of flash banks */ +#define RO_BANK_OFFSET (CONFIG_SECTION_RO_OFF / CONFIG_FLASH_BANK_SIZE) +#define RO_BANK_COUNT (CONFIG_SECTION_RO_SIZE / CONFIG_FLASH_BANK_SIZE) + +/* Read-write firmware offset and size in units of flash banks */ +#define RW_BANK_OFFSET (CONFIG_SECTION_RW_OFF / CONFIG_FLASH_BANK_SIZE) +#define RW_BANK_COUNT (CONFIG_SECTION_RW_SIZE / CONFIG_FLASH_BANK_SIZE) + +/* Persistent protection state flash offset / size / bank */ +#define PSTATE_OFFSET CONFIG_SECTION_FLASH_PSTATE_OFF +#define PSTATE_SIZE CONFIG_SECTION_FLASH_PSTATE_SIZE +#define PSTATE_BANK (PSTATE_OFFSET / CONFIG_FLASH_BANK_SIZE) +#define PSTATE_BANK_COUNT (PSTATE_SIZE / CONFIG_FLASH_BANK_SIZE) + /*****************************************************************************/ /* Low-level methods, for use by flash_common. */ @@ -71,6 +88,17 @@ int flash_physical_erase(int offset, int size); int flash_physical_get_protect(int bank); /** + * Set physical write protect status for the next boot. + * + * @param start_bank Start bank + * @param bank_count Number of banks to protect + * @param enable Enable (non-zero) or disable (zero) protection + * @return non-zero if error. + */ +int flash_physical_set_protect_at_boot(int start_bank, int bank_count, + int enable); + +/** * Force reload of flash protection bits. * * Some EC architectures (STM32L) only load the bits from option bytes at @@ -82,6 +110,27 @@ int flash_physical_get_protect(int bank); int flash_physical_force_reload(void); /*****************************************************************************/ +/* Low-level persistent state code for use by flash modules. */ + +/** + * Return non-zero if RO flash should be protected at boot. + */ +int flash_get_protect_ro_at_boot(void); + +/** + * Enable write protect for the read-only code. + * + * Once write protect is enabled, it will STAY enabled until the system is + * hard-rebooted with the hardware write protect pin deasserted. If the write + * protect pin is deasserted, the protect setting is ignored, and the entire + * flash will be writable. + * + * @param enable Enable write protection + * @return EC_SUCCESS, or nonzero if error. + */ +int flash_protect_ro_at_boot(int enable); + +/*****************************************************************************/ /* High-level interface for use by other modules. */ /** |