diff options
Diffstat (limited to 'include/fpsensor.h')
-rw-r--r-- | include/fpsensor.h | 262 |
1 files changed, 115 insertions, 147 deletions
diff --git a/include/fpsensor.h b/include/fpsensor.h index 3470cb3386..2c5baa2679 100644 --- a/include/fpsensor.h +++ b/include/fpsensor.h @@ -11,7 +11,6 @@ #include <stdint.h> #include "common.h" #include "ec_commands.h" -#include "fpsensor_detect.h" #ifndef SPI_FP_DEVICE #define SPI_FP_DEVICE (&spi_devices[0]) @@ -24,157 +23,48 @@ /* 8-bit greyscale pixel format as defined by V4L2 headers */ #define V4L2_PIX_FMT_GREY FOURCC('G', 'R', 'E', 'Y') +/* --- functions provided by the sensor-specific driver --- */ + +/* Initialize the connected sensor hardware and put it in a low power mode. */ +int fp_sensor_init(void); + +/* De-initialize the sensor hardware. */ +int fp_sensor_deinit(void); + +/* + * Fill the 'ec_response_fp_info' buffer with the sensor information + * as required by the EC_CMD_FP_INFO host command. + * + * Put both the static information and the ones read from the sensor at runtime. + */ +int fp_sensor_get_info(struct ec_response_fp_info *resp); + +/* + * Put the sensor in its lowest power state. + * + * fp_sensor_configure_detect needs to be called to restore finger detection + * functionality. + */ +void fp_sensor_low_power(void); + +/* + * Configure finger detection. + * + * Send the settings to the sensor, so it is properly configured to detect + * the presence of a finger. + */ +void fp_sensor_configure_detect(void); + +/* + * Returns the status of the finger on the sensor. + * (assumes fp_sensor_configure_detect was called before) + */ enum finger_state { FINGER_NONE = 0, FINGER_PARTIAL = 1, FINGER_PRESENT = 2, }; - -/* --- functions provided by the sensor-specific driver --- */ - -struct fp_sensor_interface { - /* Whether there is an ELAN fingerprint sensor or FPC sensor. */ - enum fp_sensor_type sensor_type; - - /* - * Initialize the connected sensor hardware and put it in a low power - * mode. - */ - int (*fp_sensor_init)(void); - - /* De-initialize the sensor hardware. */ - int (*fp_sensor_deinit)(void); - - /* - * Fill the 'ec_response_fp_info' buffer with the sensor information - * as required by the EC_CMD_FP_INFO host command. - * - * Put both the static information and the ones read from the sensor at - * runtime. - */ - int (*fp_sensor_get_info)(struct ec_response_fp_info *resp); - - /* - * Put the sensor in its lowest power state. - * - * fp_sensor_configure_detect needs to be called to restore finger - * detection functionality. - */ - void (*fp_sensor_low_power)(void); - - /* - * Configure finger detection. - * - * Send the settings to the sensor, so it is properly configured to - * detect the presence of a finger. - */ - /* TODO(b/184101599): Remove "_" suffix. */ - void (*fp_sensor_configure_detect_)(void); - - /* - * Returns the status of the finger on the sensor. - * (assumes fp_sensor_configure_detect was called before) - */ - /* TODO(b/184101599): Remove "_" suffix. */ - enum finger_state (*fp_sensor_finger_status_)(void); - - /* - * Acquires a fingerprint image with specific capture mode. - * - * Same as the fp_sensor_acquire_image function above, - * excepted 'mode' can be set to one of the FP_CAPTURE_ constants - * to get a specific image type (e.g. a pattern) rather than the default - * one. - */ - /* TODO(b/184101599): Remove "_" suffix. */ - int (*fp_sensor_acquire_image_with_mode_)(uint8_t *image_data, - int mode); - - /* - * Adds fingerprint image to the current enrollment session. - * - * @return a negative value on error or one of the following codes: - * - EC_MKBP_FP_ERR_ENROLL_OK when image was successfully enrolled - * - EC_MKBP_FP_ERR_ENROLL_IMMOBILE when image added, but user should be - * advised to move finger - * - EC_MKBP_FP_ERR_ENROLL_LOW_QUALITY when image could not be used due - * to low image quality - * - EC_MKBP_FP_ERR_ENROLL_LOW_COVERAGE when image could not be used due - * to finger covering too little area of the sensor - */ - int (*fp_finger_enroll)(uint8_t *image, int *completion); - - /* - * Compares given finger image against enrolled templates. - * - * The matching algorithm can update the template with additional - * biometric data from the image, if it chooses to do so. - * - * @param templ a pointer to the array of template buffers. - * @param templ_count the number of buffers in the array of templates. - * @param image the buffer containing the finger image - * @param match_index index of the matched finger in the template array - * if any. - * @param update_bitmap contains one bit per template, the bit is set if - * the match has updated the given template. - * @return negative value on error, else one of the following code : - * - EC_MKBP_FP_ERR_MATCH_NO on non-match - * - EC_MKBP_FP_ERR_MATCH_YES for match when template was not updated - * with new data - * - EC_MKBP_FP_ERR_MATCH_YES_UPDATED for match when template was - * updated - * - EC_MKBP_FP_ERR_MATCH_YES_UPDATE_FAILED match, but update failed - * (not saved) - * - EC_MKBP_FP_ERR_MATCH_LOW_QUALITY when matching could not be - * performed due to low image quality - * - EC_MKBP_FP_ERR_MATCH_LOW_COVERAGE when matching could not be - * performed due to finger covering too little area of the sensor - */ - int (*fp_finger_match)(void *templ, uint32_t templ_count, - uint8_t *image, int32_t *match_index, - uint32_t *update_bitmap); - - /* - * Start a finger enrollment session. - * - * @return 0 on success or a negative error code. - */ - int (*fp_enrollment_begin)(void); - - /* - * Generate a template from the finger whose enrollment has just being - * completed. - * - * @param templ the buffer which will receive the template. - * templ can be set to NULL to abort the current enrollment process. - * - * @return 0 on success or a negative error code. - */ - int (*fp_enrollment_finish)(void *templ); - - /** - * Runs a test for defective pixels. - * - * Should be triggered periodically by the client. The maintenance - * command can take several hundred milliseconds to run. - * - * @return EC_ERROR_HW_INTERNAL on error (such as finger on sensor) - * @return EC_SUCCESS on success - */ - int (*fp_maintenance)(void); - - /* Size of one unencrypted fingerprint template. */ - int algorithm_template_size; - - /* Size of one encrypted fingerprint template sent to the AP. */ - int encrypted_template_size; - - /* Sensor resolution. */ - int res_x; - int res_y; -}; - -extern struct fp_sensor_interface *fp_driver; +enum finger_state fp_sensor_finger_status(void); /* * Acquires a fingerprint image. @@ -197,4 +87,82 @@ extern struct fp_sensor_interface *fp_driver; #define FP_SENSOR_LOW_SENSOR_COVERAGE 3 int fp_sensor_acquire_image(uint8_t *image_data); +/* + * Acquires a fingerprint image with specific capture mode. + * + * Same as the fp_sensor_acquire_image function above, + * excepted 'mode' can be set to one of the FP_CAPTURE_ constants + * to get a specific image type (e.g. a pattern) rather than the default one. + */ +int fp_sensor_acquire_image_with_mode(uint8_t *image_data, int mode); + +/* + * Compares given finger image against enrolled templates. + * + * The matching algorithm can update the template with additional biometric data + * from the image, if it chooses to do so. + * + * @param templ a pointer to the array of template buffers. + * @param templ_count the number of buffers in the array of templates. + * @param image the buffer containing the finger image + * @param match_index index of the matched finger in the template array if any. + * @param update_bitmap contains one bit per template, the bit is set if the + * match has updated the given template. + * @return negative value on error, else one of the following code : + * - EC_MKBP_FP_ERR_MATCH_NO on non-match + * - EC_MKBP_FP_ERR_MATCH_YES for match when template was not updated with + * new data + * - EC_MKBP_FP_ERR_MATCH_YES_UPDATED for match when template was updated + * - EC_MKBP_FP_ERR_MATCH_YES_UPDATE_FAILED match, but update failed (not saved) + * - EC_MKBP_FP_ERR_MATCH_LOW_QUALITY when matching could not be performed due + * to low image quality + * - EC_MKBP_FP_ERR_MATCH_LOW_COVERAGE when matching could not be performed + * due to finger covering too little area of the sensor + */ +int fp_finger_match(void *templ, uint32_t templ_count, uint8_t *image, + int32_t *match_index, uint32_t *update_bitmap); + +/* + * Start a finger enrollment session. + * + * @return 0 on success or a negative error code. + */ +int fp_enrollment_begin(void); + +/* + * Generate a template from the finger whose enrollment has just being + * completed. + * + * @param templ the buffer which will receive the template. + * templ can be set to NULL to abort the current enrollment process. + * + * @return 0 on success or a negative error code. + */ +int fp_enrollment_finish(void *templ); + +/* + * Adds fingerprint image to the current enrollment session. + * + * @return a negative value on error or one of the following codes: + * - EC_MKBP_FP_ERR_ENROLL_OK when image was successfully enrolled + * - EC_MKBP_FP_ERR_ENROLL_IMMOBILE when image added, but user should be + * advised to move finger + * - EC_MKBP_FP_ERR_ENROLL_LOW_QUALITY when image could not be used due to low + * image quality + * - EC_MKBP_FP_ERR_ENROLL_LOW_COVERAGE when image could not be used due to + * finger covering too little area of the sensor + */ +int fp_finger_enroll(uint8_t *image, int *completion); + +/** + * Runs a test for defective pixels. + * + * Should be triggered periodically by the client. The maintenance command can + * take several hundred milliseconds to run. + * + * @return EC_ERROR_HW_INTERNAL on error (such as finger on sensor) + * @return EC_SUCCESS on success + */ +int fp_maintenance(void); + #endif /* __CROS_EC_FPSENSOR_H */ |