diff options
Diffstat (limited to 'zephyr/dts/bindings/battery/battery-fuel-gauge.yaml')
-rw-r--r-- | zephyr/dts/bindings/battery/battery-fuel-gauge.yaml | 85 |
1 files changed, 0 insertions, 85 deletions
diff --git a/zephyr/dts/bindings/battery/battery-fuel-gauge.yaml b/zephyr/dts/bindings/battery/battery-fuel-gauge.yaml deleted file mode 100644 index 2572090024..0000000000 --- a/zephyr/dts/bindings/battery/battery-fuel-gauge.yaml +++ /dev/null @@ -1,85 +0,0 @@ -# Copyright 2021 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -description: | - Battery fuel gauge parameters - -compatible: "battery-fuel-gauge" - -properties: - manuf_name: - description: Manufacturer name - type: string - device_name: - description: Model/Device name - type: string - ship_mode_wb_support: - description: | - Write Block support. If this is true, then i2c write block command - will be used instead of a 16-bit write - Value must be either 0 or 1. - type: int - ship_mode_reg_addr: - description: | - Address of register responsible for enabling ship mode. - type: int - ship_mode_reg_data: - description: | - Values written to register to enable ship mode. - type: array - sleep_mode_support: - description: | - Defines if battery support fuel gauge sleep command. - Value must be either 0 or 1. - type: int - sleep_mode_reg_addr: - description: | - Defines address where command will be sent to go into sleep mode. - type: int - sleep_mode_reg_data: - description: | - Defines value which will be sent to register to go into sleep mode. - type: int - fet_mfgacc_support: - description: | - Defines if battery supports manufacturer access command. - If enabled, FET status is read using the ManufacturerBlockAccess (0x44) - to read the OperationStatus (0x54) register. - The fet_reg_mask and fet_disconnect_val properties must still be - defined. - Value must be either 0 or 1. - type: int - fet_reg_addr: - description: | - Address of register which reports charging and discharging FETs status. - This property is ignored if fet_mfgacc_support is true. - type: int - fet_reg_mask: - description: | - Mask which determines which bit in status value contains the - discharge FET status. - type: int - fet_disconnect_val: - description: | - Value that describes which bits must be set to determine that - discharge FET has disconnected the battery. - type: int - fet_cfet_mask: - description: | - Mask which determines which bit in status value contains the - charge FET status. If this value is 0, this means there's - no charge FET. - type: int - fet_cfet_off_val: - description: | - Value that describes which bits must be set to determine that - charge FET has disconnected the battery. - type: int - imbalance_mv: - description: | - This property is used only if - CONFIG_PLATFORM_EC_BATTERY_MEASURE_IMBALANCE is enabled. - It should be an enum and its value should be a name of function - which will be assigned to imbalance_mv pointer. - type: string |