diff options
Diffstat (limited to 'zephyr/program/brya')
-rw-r--r-- | zephyr/program/brya/BUILD.py | 43 | ||||
-rw-r--r-- | zephyr/program/brya/CMakeLists.txt | 39 | ||||
-rw-r--r-- | zephyr/program/brya/Kconfig | 11 | ||||
-rw-r--r-- | zephyr/program/brya/adc.dts | 36 | ||||
-rw-r--r-- | zephyr/program/brya/battery.dts | 15 | ||||
-rw-r--r-- | zephyr/program/brya/battery_present.c | 21 | ||||
-rw-r--r-- | zephyr/program/brya/brya.dts | 24 | ||||
-rw-r--r-- | zephyr/program/brya/fan.dts | 39 | ||||
-rw-r--r-- | zephyr/program/brya/gpio.dts | 341 | ||||
-rw-r--r-- | zephyr/program/brya/i2c.dts | 284 | ||||
-rw-r--r-- | zephyr/program/brya/interrupts.dts | 150 | ||||
-rw-r--r-- | zephyr/program/brya/kblight_hooks.c | 69 | ||||
-rw-r--r-- | zephyr/program/brya/keyboard.dts | 47 | ||||
-rw-r--r-- | zephyr/program/brya/motionsense.dts | 257 | ||||
-rw-r--r-- | zephyr/program/brya/prj.conf | 175 | ||||
-rw-r--r-- | zephyr/program/brya/prj_brya.conf | 6 | ||||
-rw-r--r-- | zephyr/program/brya/pwm_leds.dts | 79 | ||||
-rw-r--r-- | zephyr/program/brya/temp_sensors.dts | 75 | ||||
-rw-r--r-- | zephyr/program/brya/usbc.dts | 69 |
19 files changed, 0 insertions, 1780 deletions
diff --git a/zephyr/program/brya/BUILD.py b/zephyr/program/brya/BUILD.py deleted file mode 100644 index 9991335ca7..0000000000 --- a/zephyr/program/brya/BUILD.py +++ /dev/null @@ -1,43 +0,0 @@ -# Copyright 2021 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -"""Define zmake projects for brya.""" - - -def register_npcx9_variant( - project_name, extra_dts_overlays=(), extra_kconfig_files=() -): - """Register a variant of a brya, even though this is not named as such.""" - return register_npcx_project( - project_name=project_name, - zephyr_board="npcx9m3f", - dts_overlays=[ - "adc.dts", - "battery.dts", - "fan.dts", - "gpio.dts", - "i2c.dts", - "interrupts.dts", - "keyboard.dts", - "motionsense.dts", - "pwm_leds.dts", - "temp_sensors.dts", - "usbc.dts", - # Project-specific DTS customization. - *extra_dts_overlays, - ], - kconfig_files=[ - # Common to all projects. - here / "prj.conf", - # Project-specific KConfig customization. - *extra_kconfig_files, - ], - ) - - -brya = register_npcx9_variant( - project_name="brya", - extra_dts_overlays=[here / "brya.dts"], - extra_kconfig_files=[here / "prj_brya.conf"], -) diff --git a/zephyr/program/brya/CMakeLists.txt b/zephyr/program/brya/CMakeLists.txt deleted file mode 100644 index 11c1a8386f..0000000000 --- a/zephyr/program/brya/CMakeLists.txt +++ /dev/null @@ -1,39 +0,0 @@ -# Copyright 2021 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -cmake_minimum_required(VERSION 3.13.1) - -find_package(Zephyr REQUIRED HINTS "${ZEPHYR_BASE}") -project(brya) - -set(PLATFORM_EC_BOARD "${PLATFORM_EC}/board/brya" CACHE PATH - "Path to the platform/ec board directory") -set(PLATFORM_EC_BASEBOARD "${PLATFORM_EC}/baseboard/brya" CACHE PATH - "Path to the platform/ec baseboard directory") - -# Include board specific header files -zephyr_include_directories( - include - "${PLATFORM_EC}/driver/tcpm" - "${PLATFORM_EC_BASEBOARD}" - "${PLATFORM_EC_BOARD}") - -zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_BATTERY - "${PLATFORM_EC_BASEBOARD}/battery_presence.c") -zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_CBI_EEPROM - "${PLATFORM_EC_BASEBOARD}/cbi.c") -zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_PWM_KBLIGHT - "kblight_hooks.c") -zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_BATTERY - "${PLATFORM_EC_BASEBOARD}/battery_presence.c") -zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_BATTERY - "battery_present.c") -zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_USB_POWER_DELIVERY - "${PLATFORM_EC_BASEBOARD}/usb_pd_policy.c") -zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_USBC - "${PLATFORM_EC_BOARD}/usbc_config.c" - "${PLATFORM_EC_BOARD}/fw_config.c") -zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_CHARGE_MANAGER - "${PLATFORM_EC_BOARD}/charger.c" - "${PLATFORM_EC}/common/math_util.c") diff --git a/zephyr/program/brya/Kconfig b/zephyr/program/brya/Kconfig deleted file mode 100644 index 4dd8e23443..0000000000 --- a/zephyr/program/brya/Kconfig +++ /dev/null @@ -1,11 +0,0 @@ -# Copyright 2022 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -config BOARD_BRYA - bool "Google Brya Baseboard" - help - Build Google Brya reference board. The board uses the Nuvuton NPCX9 - chip as the EC. - -source "Kconfig.zephyr" diff --git a/zephyr/program/brya/adc.dts b/zephyr/program/brya/adc.dts deleted file mode 100644 index f3f0d1e064..0000000000 --- a/zephyr/program/brya/adc.dts +++ /dev/null @@ -1,36 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - named-adc-channels { - compatible = "named-adc-channels"; - - adc_ddr_soc: ddr_soc { - enum-name = "ADC_TEMP_SENSOR_1_DDR_SOC"; - io-channels = <&adc0 0>; - }; - adc_ambient: ambient { - enum-name = "ADC_TEMP_SENSOR_2_AMBIENT"; - io-channels = <&adc0 1>; - }; - adc_charger: charger { - enum-name = "ADC_TEMP_SENSOR_3_CHARGER"; - io-channels = <&adc0 6>; - }; - adc_wwan: wwan { - enum-name = "ADC_TEMP_SENSOR_4_WWAN"; - io-channels = <&adc0 7>; - }; - }; -}; - -&adc0 { - status = "okay"; - pinctrl-0 = <&adc0_chan0_gp45 - &adc0_chan1_gp44 - &adc0_chan6_gp34 - &adc0_chan7_gpe1>; - pinctrl-names = "default"; -}; diff --git a/zephyr/program/brya/battery.dts b/zephyr/program/brya/battery.dts deleted file mode 100644 index 4844d88d92..0000000000 --- a/zephyr/program/brya/battery.dts +++ /dev/null @@ -1,15 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - batteries { - default_battery: batgqa05l22 { - compatible = "powertech,batgqa05l22", "battery-smart"; - }; - lgc_ac17a8m { - compatible = "lgc,ac17a8m", "battery-smart"; - }; - }; -}; diff --git a/zephyr/program/brya/battery_present.c b/zephyr/program/brya/battery_present.c deleted file mode 100644 index b2af448271..0000000000 --- a/zephyr/program/brya/battery_present.c +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ -#include "battery.h" -#include "cbi.h" - -#include <zephyr/drivers/gpio.h> - -enum battery_present battery_hw_present(void) -{ - const struct gpio_dt_spec *batt_pres; - - if (get_board_id() == 1) - batt_pres = GPIO_DT_FROM_NODELABEL(gpio_id_1_ec_batt_pres_odl); - else - batt_pres = GPIO_DT_FROM_NODELABEL(gpio_ec_batt_pres_odl); - - /* The GPIO is low when the battery is physically present */ - return gpio_pin_get_dt(batt_pres) ? BP_NO : BP_YES; -} diff --git a/zephyr/program/brya/brya.dts b/zephyr/program/brya/brya.dts deleted file mode 100644 index 4b0490afa9..0000000000 --- a/zephyr/program/brya/brya.dts +++ /dev/null @@ -1,24 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - model = "Google Brya Baseboard"; - - chosen { - cros,rtc = &mtc; - }; - - ec-console { - compatible = "ec-console"; - disabled = "events", "lpc", "hostcmd"; - }; -}; - -/* host interface */ -&espi0 { - status = "okay"; - pinctrl-0 = <&espi_lpc_gp46_47_51_52_53_54_55_57>; - pinctrl-names = "default"; -}; diff --git a/zephyr/program/brya/fan.dts b/zephyr/program/brya/fan.dts deleted file mode 100644 index aa6dcfde7d..0000000000 --- a/zephyr/program/brya/fan.dts +++ /dev/null @@ -1,39 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - fans { - compatible = "cros-ec,fans"; - - fan_0 { - pwms = <&pwm5 0 PWM_KHZ(1) PWM_POLARITY_NORMAL>; - rpm_min = <2200>; - rpm_start = <2200>; - rpm_max = <4200>; - tach = <&tach1>; - enable_gpio = <&gpio_en_pp5000_fan>; - }; - }; -}; - -/* Tachemeter for fan speed measurement */ -&tach1 { - status = "okay"; - pinctrl-0 = <&ta1_1_in_gp40>; - pinctrl-names = "default"; - port = <NPCX_TACH_PORT_A>; /* port-A is selected */ - sample-clk = <NPCX_TACH_FREQ_LFCLK>; /* Use LFCLK as sampling clock */ - pulses-per-round = <2>; /* number of pulses per round of encoder */ -}; - -&pwm5_gpb7 { - drive-open-drain; -}; - -&pwm5 { - status = "okay"; - pinctrl-0 = <&pwm5_gpb7>; - pinctrl-names = "default"; -}; diff --git a/zephyr/program/brya/gpio.dts b/zephyr/program/brya/gpio.dts deleted file mode 100644 index 6c6a2ac054..0000000000 --- a/zephyr/program/brya/gpio.dts +++ /dev/null @@ -1,341 +0,0 @@ -/* Copyright 2021 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - aliases { - gpio-wp = &gpio_ec_wp_l; - gpio-kbd-kso2 = &gpio_ec_kso_02_inv; - }; - - named-gpios { - compatible = "named-gpios"; - - lid_open: lid_open { - gpios = <&gpiod 2 GPIO_INPUT>; - enum-name = "GPIO_LID_OPEN"; - }; - gsc_ec_pwr_btn_odl: gsc_ec_pwr_btn_odl { - gpios = <&gpio0 1 GPIO_INPUT>; - enum-name = "GPIO_POWER_BUTTON_L"; - }; - gpio_ec_wp_l: ec_wp_odl { - gpios = <&gpioa 1 (GPIO_INPUT | GPIO_ACTIVE_LOW)>; - }; - charger_vap_otg_en { - gpios = <&gpio7 3 GPIO_OUTPUT_LOW>; - }; - gpio_ec_batt_pres_odl: ec_batt_pres_odl { - gpios = <&gpioa 3 GPIO_INPUT>; - enum-name = "GPIO_BATT_PRES_ODL"; - }; - /* - * Same GPIO as gpio_ec_batt_pres_odl, - * but only enabled for board id 1. - */ - gpio_id_1_ec_kb_bl_en: id_1_ec_kb_bl_en { - gpios = <&gpioa 3 GPIO_OUTPUT_LOW>; - no-auto-init; - }; - gpio_id_1_ec_batt_pres_odl: id_1_ec_batt_pres_odl { - gpios = <&gpioe 1 GPIO_INPUT>; - }; - ec_i2c_bat_scl { - gpios = <&gpio3 3 GPIO_INPUT>; - }; - ec_i2c_bat_sda { - gpios = <&gpio3 6 GPIO_INPUT>; - }; - gpio_ec_kb_bl_en_l: ec_kb_bl_en_l { - gpios = <&gpio8 6 GPIO_OUTPUT_HIGH>; - }; - ec_i2c_misc_scl_r { - gpios = <&gpiob 3 GPIO_INPUT>; - }; - ec_i2c_misc_sda_r { - gpios = <&gpiob 2 GPIO_INPUT>; - }; - ec_i2c_sensor_scl { - gpios = <&gpiob 5 GPIO_INPUT>; - }; - ec_i2c_sensor_sda { - gpios = <&gpiob 4 GPIO_INPUT>; - }; - ec_i2c_usb_c0_c2_ppc_bc_scl { - gpios = <&gpio9 2 GPIO_INPUT>; - }; - ec_i2c_usb_c0_c2_ppc_bc_sda { - gpios = <&gpio9 1 GPIO_INPUT>; - }; - ec_i2c_usb_c0_c2_rt_scl { - gpios = <&gpiod 1 GPIO_INPUT>; - }; - ec_i2c_usb_c0_c2_rt_sda { - gpios = <&gpiod 0 GPIO_INPUT>; - }; - ec_i2c_usb_c0_c2_tcpc_scl { - gpios = <&gpio9 0 GPIO_INPUT>; - }; - ec_i2c_usb_c0_c2_tcpc_sda { - gpios = <&gpio8 7 GPIO_INPUT>; - }; - ec_i2c_usb_c1_mix_scl { - gpios = <&gpioe 4 GPIO_INPUT>; - }; - ec_i2c_usb_c1_mix_sda { - gpios = <&gpioe 3 GPIO_INPUT>; - }; - ec_i2c_usb_c1_tcpc_scl { - gpios = <&gpiof 3 GPIO_INPUT>; - }; - ec_i2c_usb_c1_tcpc_sda { - gpios = <&gpiof 2 GPIO_INPUT>; - }; - ec_chg_led_y_c1 { - gpios = <&gpioc 3 GPIO_OUTPUT_LOW>; - }; - ec_chg_led_b_c1 { - gpios = <&gpioc 4 GPIO_OUTPUT_LOW>; - }; - ec_gsc_packet_mode { - gpios = <&gpio7 5 GPIO_OUTPUT_LOW>; - enum-name = "GPIO_PACKET_MODE_EN"; - }; - gpio_ec_accel_int_l: ec_accel_int_l { - gpios = <&gpio8 1 GPIO_INPUT>; - }; - gpio_ec_imu_int_l: gpio_ec_imu_int_l { - gpios = <&gpio5 6 GPIO_INPUT>; - }; - gpio_ec_als_rgb_int_l: gpio_ec_als_rgb_int_l { - gpios = <&gpiod 4 GPIO_INPUT>; - }; - gpio_tablet_mode_l: tablet_mode_l { - gpios = <&gpio9 5 GPIO_INPUT>; - enum-name = "GPIO_TABLET_MODE_L"; - }; - acok_od: acok_od { - gpios = <&gpio0 0 GPIO_INPUT>; - enum-name = "GPIO_AC_PRESENT"; - }; - gpio_ec_kso_02_inv: ec_kso_02_inv { - gpios = <&gpio1 7 (GPIO_OUTPUT_LOW | GPIO_ACTIVE_LOW)>; - }; - gpio_ec_pch_wake_odl: ec_pch_wake_r_odl { - gpios = <&gpioc 0 GPIO_ODR_HIGH>; - }; - ec_pch_int_odl { - gpios = <&gpiob 0 GPIO_ODR_HIGH>; - enum-name = "GPIO_EC_INT_L"; - }; - gpio_pg_ec_dsw_pwrok: pg_ec_dsw_pwrok { - gpios = <&gpioc 7 GPIO_INPUT>; - enum-name = "GPIO_PG_EC_DSW_PWROK"; - alias = "GPIO_SEQ_EC_DSW_PWROK"; - }; - en_s5_rails { - gpios = <&gpiob 6 GPIO_OUTPUT_LOW>; - enum-name = "GPIO_EN_S5_RAILS"; - alias = "GPIO_TEMP_SENSOR_POWER"; - }; - sys_rst_odl { - gpios = <&gpioc 5 GPIO_ODR_HIGH>; - enum-name = "GPIO_SYS_RESET_L"; - }; - gpio_pg_ec_rsmrst_odl: pg_ec_rsmrst_odl { - gpios = <&gpioe 2 GPIO_INPUT>; - enum-name = "GPIO_PG_EC_RSMRST_ODL"; - }; - ec_pch_rsmrst_odl { - gpios = <&gpioa 6 GPIO_OUTPUT_LOW>; - enum-name = "GPIO_PCH_RSMRST_L"; - }; - gpio_pg_ec_all_sys_pwrgd: pg_ec_all_sys_pwrgd { - gpios = <&gpiof 4 GPIO_INPUT>; - enum-name = "GPIO_PG_EC_ALL_SYS_PWRGD"; - }; - gpio_slp_s0_l: slp_s0_l { - gpios = <&gpiod 5 GPIO_INPUT>; - enum-name = "GPIO_PCH_SLP_S0_L"; - }; - gpio_slp_s3_l: slp_s3_l { - gpios = <&gpioa 5 GPIO_INPUT>; - enum-name = "GPIO_PCH_SLP_S3_L"; - }; - vccst_pwrgd_od { - gpios = <&gpioa 4 GPIO_ODR_LOW>; - enum-name = "GPIO_VCCST_PWRGD_OD"; - }; - ec_prochot_odl { - gpios = <&gpio6 3 GPIO_ODR_HIGH>; - enum-name = "GPIO_CPU_PROCHOT"; - }; - ec_pch_pwr_btn_odl { - gpios = <&gpioc 1 GPIO_ODR_HIGH>; - enum-name = "GPIO_PCH_PWRBTN_L"; - }; - gpio_slp_sus_l: slp_sus_l { - gpios = <&gpiof 1 GPIO_INPUT>; - enum-name = "GPIO_SLP_SUS_L"; - }; - pch_pwrok { - gpios = <&gpio7 2 GPIO_OUTPUT_LOW>; - enum-name = "GPIO_PCH_PWROK"; - }; - ec_pch_sys_pwrok { - gpios = <&gpio3 7 GPIO_OUTPUT_LOW>; - enum-name = "GPIO_EC_PCH_SYS_PWROK"; - }; - imvp9_vrrdy_od { - gpios = <&gpio4 3 GPIO_INPUT>; - enum-name = "GPIO_IMVP9_VRRDY_OD"; - }; - ec_edp_bl_en { - gpios = <&gpiod 3 GPIO_OUTPUT_HIGH>; - enum-name = "GPIO_ENABLE_BACKLIGHT"; - }; - gpio_ec_prochot_in_l: ec_prochot_in_l { - gpios = <&gpiof 0 GPIO_INPUT>; - }; - gpio_en_pp5000_fan: en_pp5000_fan { - gpios = <&gpio6 1 GPIO_OUTPUT_HIGH>; - }; - gpio_ec_voldn_btn_odl: ec_voldn_btn_odl { - gpios = <&gpio9 3 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_VOLUME_DOWN_L"; - }; - gpio_ec_volup_btn_odl: ec_volup_btn_odl { - gpios = <&gpio9 7 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_VOLUME_UP_L"; - }; - gpio_usb_c0_c2_tcpc_int_odl: usb_c0_c2_tcpc_int_odl { - gpios = <&gpioe 0 GPIO_INPUT>; - enum-name = "GPIO_USB_C0_C2_TCPC_INT_ODL"; - }; - gpio_usb_c1_tcpc_int_odl: usb_c1_tcpc_int_odl { - gpios = <&gpioa 2 GPIO_INPUT>; - enum-name = "GPIO_USB_C1_TCPC_INT_ODL"; - }; - gpio_usb_c0_ppc_int_odl: usb_c0_ppc_int_odl { - gpios = <&gpio6 2 GPIO_INPUT>; - enum-name = "GPIO_USB_C0_PPC_INT_ODL"; - }; - gpio_usb_c1_ppc_int_odl: usb_c1_ppc_int_odl { - gpios = <&gpiof 5 GPIO_INPUT>; - enum-name = "GPIO_USB_C1_PPC_INT_ODL"; - }; - gpio_usb_c2_ppc_int_odl: usb_c2_ppc_int_odl { - gpios = <&gpio7 0 GPIO_INPUT>; - enum-name = "GPIO_USB_C2_PPC_INT_ODL"; - }; - gpio_usb_c0_bc12_int_odl: usb_c0_bc12_int_odl { - gpios = <&gpioc 6 GPIO_INPUT>; - enum-name = "GPIO_USB_C0_BC12_INT_ODL"; - }; - gpio_usb_c1_bc12_int_odl: usb_c1_bc12_int_odl { - gpios = <&gpio5 0 GPIO_INPUT>; - enum-name = "GPIO_USB_C1_BC12_INT_ODL"; - }; - gpio_usb_c2_bc12_int_odl: usb_c2_bc12_int_odl { - gpios = <&gpio8 3 GPIO_INPUT>; - enum-name = "GPIO_USB_C2_BC12_INT_ODL"; - }; - gpio_en_pp5000_usba_r: en_pp5000_usba_r { - gpios = <&gpiod 7 GPIO_OUTPUT_LOW>; - enum-name = "GPIO_EN_PP5000_USBA_R"; - }; - usb_c1_rt_rst_r_odl { - gpios = <&gpio0 2 GPIO_ODR_LOW>; - enum-name = "GPIO_USB_C1_RT_RST_R_ODL"; - }; - usb_c1_rst_odl { - gpios = <&gpio9 6 GPIO_ODR_LOW>; - enum-name = "GPIO_USB_C1_RST_ODL"; - }; - usb_c0_c2_tcpc_rst_odl { - gpios = <&gpioa 7 GPIO_ODR_HIGH>; - enum-name = "GPIO_USB_C0_C2_TCPC_RST_ODL"; - }; - id_1_usb_c0_c2_tcpc_rst_odl { - gpios = <&gpio3 4 GPIO_ODR_LOW>; - }; - usb_c0_int_odl { - gpios = <&gpiob 1 GPIO_INPUT>; - }; - usb_c2_int_odl { - gpios = <&gpio4 1 GPIO_INPUT>; - }; - usb_c0_rt_int_odl: usb_c0_rt_int_odl { - gpios = <&gpiob 1 GPIO_INPUT>; - }; - usb_c2_rt_int_odl: usb_c2_rt_int_odl { - gpios = <&gpio4 1 GPIO_INPUT>; - }; - usb_c0_oc_odl { - gpios = <&ioex_port1 4 GPIO_ODR_HIGH>; - no-auto-init; - }; - usb_c0_frs_en: usb_c0_frs_en { - gpios = <&ioex_port1 6 GPIO_OUTPUT_LOW>; - enum-name = "IOEX_USB_C0_FRS_EN"; - no-auto-init; - }; - usb_c0_rt_rst_odl: usb_c0_rt_rst_odl { - gpios = <&ioex_port1 7 GPIO_ODR_LOW>; - no-auto-init; - }; - usb_c2_rt_rst_odl: usb_c2_rt_rst_odl { - gpios = <&ioex_port2 2 GPIO_ODR_LOW>; - no-auto-init; - }; - usb_c1_oc_odl { - gpios = <&ioex_port2 3 GPIO_ODR_HIGH>; - no-auto-init; - }; - usb_c2_oc_odl { - gpios = <&ioex_port2 4 GPIO_ODR_HIGH>; - no-auto-init; - }; - usb_c2_frs_en: usb_c2_frs_en { - gpios = <&ioex_port2 6 GPIO_OUTPUT_LOW>; - enum-name = "IOEX_USB_C2_FRS_EN"; - no-auto-init; - }; - /* unimplemented GPIOs */ - entering-rw { - enum-name = "GPIO_ENTERING_RW"; - }; - }; - - usba-port-enable-list { - compatible = "cros-ec,usba-port-enable-pins"; - enable-pins = <&gpio_en_pp5000_usba_r>; - }; -}; - -/* Power switch logic input pads */ -/* LID_OPEN_OD */ -&psl_in1_gpd2 { - psl-in-mode = "edge"; - psl-in-pol = "high-rising"; -}; - -/* ACOK_EC_OD */ -&psl_in2_gp00 { - psl-in-mode = "edge"; - psl-in-pol = "high-rising"; -}; - -/* GSC_EC_PWR_BTN_ODL */ -&psl_in3_gp01 { - psl-in-mode = "edge"; - psl-in-pol = "high-rising"; -}; - -/* Power domain device controlled by PSL (Power Switch Logic) IO pads */ -&power_ctrl_psl { - status = "okay"; - pinctrl-names = "sleep"; - pinctrl-0 = <&psl_in1_gpd2 &psl_in2_gp00 &psl_in3_gp01>; -}; diff --git a/zephyr/program/brya/i2c.dts b/zephyr/program/brya/i2c.dts deleted file mode 100644 index 8de12cdb5e..0000000000 --- a/zephyr/program/brya/i2c.dts +++ /dev/null @@ -1,284 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - - #include <dt-bindings/usb_pd_tcpm.h> - -/ { - named-i2c-ports { - compatible = "named-i2c-ports"; - i2c_sensor: sensor { - i2c-port = <&i2c0_0>; - enum-names = "I2C_PORT_SENSOR"; - }; - tcpc0_2: tcpc0_2 { - i2c-port = <&i2c1_0>; - enum-names = "I2C_PORT_USB_C0_C2_TCPC"; - }; - tcpc1: tcpc1 { - i2c-port = <&i2c4_1>; - enum-names = "I2C_PORT_USB_C1_TCPC"; - dynamic-speed; - }; - c0_c2_bc12: c0_c2_bc12 { - i2c-port = <&i2c2_0>; - enum-names = "I2C_PORT_USB_C0_C2_PPC", - "I2C_PORT_USB_C0_C2_BC12"; - }; - c1_bc12: c1_bc12 { - i2c-port = <&i2c6_1>; - enum-names = "I2C_PORT_USB_C1_PPC", - "I2C_PORT_USB_C1_BC12"; - dynamic-speed; - }; - retimer0_2: retimer0_2 { - i2c-port = <&i2c3_0>; - enum-names = "I2C_PORT_USB_C0_C2_MUX"; - }; - battery { - i2c-port = <&i2c5_0>; - enum-names = "I2C_PORT_BATTERY"; - }; - i2c_charger: charger { - i2c-port = <&i2c7_0>; - enum-names = "I2C_PORT_CHARGER", - "I2C_PORT_EEPROM", - "I2C_PORT_MP2964"; - }; - }; -}; - -&i2c0_0 { - status = "okay"; - clock-frequency = <I2C_BITRATE_FAST>; - pinctrl-0 = <&i2c0_0_sda_scl_gpb4_b5>; - pinctrl-names = "default"; -}; - -&i2c_ctrl0 { - status = "okay"; -}; - -&i2c1_0 { - status = "okay"; - clock-frequency = <I2C_BITRATE_FAST_PLUS>; - pinctrl-0 = <&i2c1_0_sda_scl_gp87_90>; - pinctrl-names = "default"; - - tcpc_port0: nct38xx@70 { - compatible = "nuvoton,nct38xx"; - reg = <0x70>; - gpio-dev = <&nct3808_0_P1>; - tcpc-flags = <( - TCPC_FLAGS_TCPCI_REV2_0 | - TCPC_FLAGS_NO_DEBUG_ACC_CONTROL)>; - }; - - nct3808_0_P1: nct3808_0_P1@70 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nuvoton,nct38xx-gpio"; - reg = <0x70>; - label = "NCT3808_0_P1"; - - ioex_port1: gpio@0 { - compatible = "nuvoton,nct38xx-gpio-port"; - reg = <0x0>; - label = "NCT3808_0_P1_GPIO0"; - gpio-controller; - #gpio-cells = <2>; - ngpios = <8>; - pin_mask = <0xdc>; - pinmux_mask = <0xff>; - }; - }; - - tcpc_port2: nct38xx@74 { - compatible = "nuvoton,nct38xx"; - reg = <0x74>; - gpio-dev = <&nct3808_0_P2>; - tcpc-flags = <(TCPC_FLAGS_TCPCI_REV2_0)>; - }; - - nct3808_0_P2: nct3808_0_P2@74 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nuvoton,nct38xx-gpio"; - reg = <0x74>; - label = "NCT3808_0_P2"; - - ioex_port2: gpio@0 { - compatible = "nuvoton,nct38xx-gpio-port"; - reg = <0x0>; - label = "NCT3808_0_P2_GPIO0"; - gpio-controller; - #gpio-cells = <2>; - ngpios = <8>; - pin_mask = <0xdc>; - pinmux_mask = <0xff>; - }; - }; - - nct3808_alert_1 { - compatible = "nuvoton,nct38xx-gpio-alert"; - irq-gpios = <&gpioe 0 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; - nct38xx-dev = <&nct3808_0_P1 &nct3808_0_P2>; - label = "NCT3808_ALERT_1"; - }; -}; - -&i2c_ctrl1 { - status = "okay"; -}; - -&i2c2_0 { - status = "okay"; - clock-frequency = <I2C_BITRATE_FAST_PLUS>; - pinctrl-0 = <&i2c2_0_sda_scl_gp91_92>; - pinctrl-names = "default"; - - ppc_port0: syv682x@40 { - compatible = "silergy,syv682x"; - status = "okay"; - reg = <0x40>; - frs_en_gpio = <&usb_c0_frs_en>; - }; - - bc12_port0: pi3usb9201@5f { - compatible = "pericom,pi3usb9201"; - status = "okay"; - reg = <0x5f>; - irq = <&int_usb_c0_bc12>; - }; - - ppc_port2: syv682x@42 { - compatible = "silergy,syv682x"; - status = "okay"; - reg = <0x42>; - frs_en_gpio = <&usb_c2_frs_en>; - }; - - bc12_port2: pi3usb9201@5d { - compatible = "pericom,pi3usb9201"; - status = "okay"; - reg = <0x5d>; - irq = <&int_usb_c2_bc12>; - }; -}; - -&i2c_ctrl2 { - status = "okay"; -}; - -&i2c3_0 { - status = "okay"; - clock-frequency = <I2C_BITRATE_FAST_PLUS>; - pinctrl-0 = <&i2c3_0_sda_scl_gpd0_d1>; - pinctrl-names = "default"; - - usb_c0_bb_retimer: jhl8040r-c0@56 { - compatible = "intel,jhl8040r"; - reg = <0x56>; - int-pin = <&usb_c0_rt_int_odl>; - reset-pin = <&usb_c0_rt_rst_odl>; - }; - - usb_c2_bb_retimer: jhl8040r-c2@57 { - compatible = "intel,jhl8040r"; - reg = <0x57>; - int-pin = <&usb_c2_rt_int_odl>; - reset-pin = <&usb_c2_rt_rst_odl>; - }; -}; - -&i2c_ctrl3 { - status = "okay"; -}; - -&i2c4_1 { - status = "okay"; - clock-frequency = <I2C_BITRATE_FAST>; - pinctrl-0 = <&i2c4_1_sda_scl_gpf2_f3>; - pinctrl-names = "default"; - - tcpc_port1: ps8xxx@b { - compatible = "parade,ps8xxx"; - reg = <0xb>; - tcpc-flags = <( - TCPC_FLAGS_TCPCI_REV2_0 | - TCPC_FLAGS_TCPCI_REV2_0_NO_VSAFE0V | - TCPC_FLAGS_CONTROL_VCONN | - TCPC_FLAGS_CONTROL_FRS)>; - }; -}; - -&i2c_ctrl4 { - status = "okay"; -}; - -&i2c5_0 { - status = "okay"; - clock-frequency = <I2C_BITRATE_STANDARD>; - pinctrl-0 = <&i2c5_0_sda_scl_gp33_36>; - pinctrl-names = "default"; -}; - -&i2c_ctrl5 { - status = "okay"; -}; - -&i2c6_1 { - status = "okay"; - clock-frequency = <I2C_BITRATE_FAST>; - pinctrl-0 = <&i2c6_1_sda_scl_gpe3_e4>; - pinctrl-names = "default"; - - ppc_port1: nx20p348x@72 { - compatible = "nxp,nx20p348x"; - status = "okay"; - reg = <0x72>; - }; - - bc12_port1: pi3usb9201@5f { - compatible = "pericom,pi3usb9201"; - status = "okay"; - reg = <0x5f>; - irq = <&int_usb_c1_bc12>; - }; -}; - -&i2c_ctrl6 { - status = "okay"; -}; - -&i2c7_0 { - status = "okay"; - clock-frequency = <I2C_BITRATE_FAST>; - pinctrl-0 = <&i2c7_0_sda_scl_gpb2_b3>; - pinctrl-names = "default"; - - pmic_mp2964@20 { - compatible = "mps,mp2964"; - reg = <0x20>; - }; - - charger: bq25710@9 { - compatible = "ti,bq25710"; - status = "okay"; - reg = <0x9>; - }; - - cbi_eeprom: eeprom@50 { - compatible = "atmel,at24"; - reg = <0x50>; - size = <2048>; - pagesize = <16>; - address-width = <8>; - timeout = <5>; - }; -}; - -&i2c_ctrl7 { - status = "okay"; -}; diff --git a/zephyr/program/brya/interrupts.dts b/zephyr/program/brya/interrupts.dts deleted file mode 100644 index 1adca3e035..0000000000 --- a/zephyr/program/brya/interrupts.dts +++ /dev/null @@ -1,150 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - aliases { - int-wp = &int_wp; - }; - - gpio-interrupts { - compatible = "cros-ec,gpio-interrupts"; - - int_tablet_mode: tablet_mode { - irq-pin = <&gpio_tablet_mode_l>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "gmr_tablet_switch_isr"; - }; - int_lid_open: lid_open { - irq-pin = <&lid_open>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "lid_interrupt"; - }; - int_power_button: power_button { - irq-pin = <&gsc_ec_pwr_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "power_button_interrupt"; - }; - int_wp: wp { - irq-pin = <&gpio_ec_wp_l>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "switch_interrupt"; - }; - int_ac_present: ac_present { - irq-pin = <&acok_od>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "extpower_interrupt"; - }; - int_volume_up: volume_up { - irq-pin = <&gpio_ec_volup_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "button_interrupt"; - }; - int_volume_down: volume_down { - irq-pin = <&gpio_ec_voldn_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "button_interrupt"; - }; - int_accel: accel { - irq-pin = <&gpio_ec_accel_int_l>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "lis2dw12_interrupt"; - }; - int_imu: imu { - irq-pin = <&gpio_ec_imu_int_l>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "lsm6dso_interrupt"; - }; - int_slp_s0: slp_s0 { - irq-pin = <&gpio_slp_s0_l>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "power_signal_interrupt"; - }; - int_slp_s3: slp_s3 { - irq-pin = <&gpio_slp_s3_l>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "power_signal_interrupt"; - }; - int_slp_sus: slp_sus { - irq-pin = <&gpio_slp_sus_l>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "power_signal_interrupt"; - }; - int_pg_dsw_pwrok: pg_dsw_pwrok { - irq-pin = <&gpio_pg_ec_dsw_pwrok>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "power_signal_interrupt"; - }; - int_pg_rsmrst_odl: pg_rsmrst_odl { - irq-pin = <&gpio_pg_ec_rsmrst_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "power_signal_interrupt"; - }; - int_pg_all_sys_pwrgd: pg_all_sys_pwrgd { - irq-pin = <&gpio_pg_ec_all_sys_pwrgd>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "power_signal_interrupt"; - }; - int_als_rgb: als_rgb { - irq-pin = <&gpio_ec_als_rgb_int_l>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "tcs3400_interrupt"; - }; - int_prochot: prochot { - irq-pin = <&gpio_ec_prochot_in_l>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "throttle_ap_prochot_input_interrupt"; - }; - int_usb_c0_c2_tcpc: usb_c0_c2_tcpc { - irq-pin = <&gpio_usb_c0_c2_tcpc_int_odl>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "tcpc_alert_event"; - }; - int_usb_c1_tcpc: usb_c1_tcpc { - irq-pin = <&gpio_usb_c1_tcpc_int_odl>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "tcpc_alert_event"; - }; - int_usb_c0_ppc: usb_c0_ppc { - irq-pin = <&gpio_usb_c0_ppc_int_odl>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "ppc_interrupt"; - }; - int_usb_c1_ppc: usb_c1_ppc { - irq-pin = <&gpio_usb_c1_ppc_int_odl>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "ppc_interrupt"; - }; - int_usb_c2_ppc: usb_c2_ppc { - irq-pin = <&gpio_usb_c2_ppc_int_odl>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "ppc_interrupt"; - }; - int_usb_c0_bc12: usb_c0_bc12 { - irq-pin = <&gpio_usb_c0_bc12_int_odl>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "bc12_interrupt"; - }; - int_usb_c1_bc12: usb_c1_bc12 { - irq-pin = <&gpio_usb_c1_bc12_int_odl>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "bc12_interrupt"; - }; - int_usb_c2_bc12: usb_c2_bc12 { - irq-pin = <&gpio_usb_c2_bc12_int_odl>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "bc12_interrupt"; - }; - int_usb_c0_rt: usb_c0_rt { - irq-pin = <&usb_c0_rt_int_odl>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "retimer_interrupt"; - }; - int_usb_c2_rt: usb_c2_rt { - irq-pin = <&usb_c2_rt_int_odl>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "retimer_interrupt"; - }; - }; -}; diff --git a/zephyr/program/brya/kblight_hooks.c b/zephyr/program/brya/kblight_hooks.c deleted file mode 100644 index 8716537f5d..0000000000 --- a/zephyr/program/brya/kblight_hooks.c +++ /dev/null @@ -1,69 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "cbi.h" -#include "hooks.h" - -#include <stdbool.h> - -#include <zephyr/drivers/gpio.h> - -#include <ap_power/ap_power.h> - -/* Enable/Disable keyboard backlight gpio */ -static inline void kbd_backlight_enable(bool enable) -{ - if (get_board_id() == 1) - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_id_1_ec_kb_bl_en), - enable); - else - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_ec_kb_bl_en_l), - !enable); -} - -static void board_backlight_handler(struct ap_power_ev_callback *cb, - struct ap_power_ev_data data) -{ - bool enable; - - switch (data.event) { - default: - return; - - case AP_POWER_RESUME: - /* Called on AP S3 -> S0 transition */ - enable = true; - break; - - case AP_POWER_SUSPEND: - /* Called on AP S0 -> S3 transition */ - enable = false; - break; - } - kbd_backlight_enable(enable); -} - -/* - * Explicitly apply the board ID 1 *gpio.inc settings to pins that - * were reassigned on current boards. - */ -static void set_board_id_1_gpios(void) -{ - static struct ap_power_ev_callback cb; - - /* - * Add a callback for suspend/resume to - * control the keyboard backlight. - */ - ap_power_ev_init_callback(&cb, board_backlight_handler, - AP_POWER_RESUME | AP_POWER_SUSPEND); - ap_power_ev_add_callback(&cb); - - if (get_board_id() != 1) - return; - gpio_pin_configure_dt(GPIO_DT_FROM_NODELABEL(gpio_id_1_ec_kb_bl_en), - GPIO_OUTPUT_LOW); -} -DECLARE_HOOK(HOOK_INIT, set_board_id_1_gpios, HOOK_PRIO_FIRST); diff --git a/zephyr/program/brya/keyboard.dts b/zephyr/program/brya/keyboard.dts deleted file mode 100644 index 91fad2db92..0000000000 --- a/zephyr/program/brya/keyboard.dts +++ /dev/null @@ -1,47 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - kblight { - compatible = "cros-ec,kblight-pwm"; - pwms = <&pwm3 0 PWM_HZ(2400) PWM_POLARITY_NORMAL>; - }; -}; - -&pwm3 { - status = "okay"; - pinctrl-0 = <&pwm3_gp80>; - pinctrl-names = "default"; -}; - -&cros_kb_raw { - status = "okay"; - /* No KSO2 (it's inverted and implemented by GPIO) */ - pinctrl-0 = < - &ksi0_gp31 - &ksi1_gp30 - &ksi2_gp27 - &ksi3_gp26 - &ksi4_gp25 - &ksi5_gp24 - &ksi6_gp23 - &ksi7_gp22 - &kso00_gp21 - &kso01_gp20 - &kso03_gp16 - &kso04_gp15 - &kso05_gp14 - &kso06_gp13 - &kso07_gp12 - &kso08_gp11 - &kso09_gp10 - &kso10_gp07 - &kso11_gp06 - &kso12_gp05 - &kso13_gp04 - &kso14_gp82 - >; - pinctrl-names = "default"; -}; diff --git a/zephyr/program/brya/motionsense.dts b/zephyr/program/brya/motionsense.dts deleted file mode 100644 index 08994e30cc..0000000000 --- a/zephyr/program/brya/motionsense.dts +++ /dev/null @@ -1,257 +0,0 @@ -/* - * Copyright 2022 The ChromiumOS Authors - * - * SPDX-License-Identifier: Apache-2.0 - */ - -#include <dt-bindings/motionsense/utils.h> - - -/ { - aliases { - /* - * motion sense's <>_INT_EVENT is handled - * by alias. Using the alias, each driver creates - * its own <>_INT_EVENT. - */ - lsm6dso-int = &base_accel; - lis2dw12-int = &lid_accel; - tcs3400-int = &als_clear; - }; - - /* - * Declare mutexes used by sensor drivers. - * A mutex node is used to create an instance of mutex_t. - * A mutex node is referenced by a sensor node if the - * corresponding sensor driver needs to use the - * instance of the mutex. - */ - motionsense-mutex { - compatible = "cros-ec,motionsense-mutex"; - mutex_lis2dw12: lis2dw12-mutex { - }; - - mutex_lsm6dso: lsm6dso-mutex { - }; - }; - - /* Rotation matrix used by drivers. */ - motionsense-rotation-ref { - compatible = "cros-ec,motionsense-rotation-ref"; - lid_rot_ref: lid-rotation-ref { - mat33 = <0 1 0 - 1 0 0 - 0 0 (-1)>; - }; - base_rot_ref: base-rotation-ref { - mat33 = <1 0 0 - 0 (-1) 0 - 0 0 (-1)>; - }; - }; - - /* - * Driver specific data. A driver-specific data can be shared with - * different motion sensors while they are using the same driver. - * - * If a node's compatible starts with "cros-ec,accelgyro-", it is for - * a common structure defined in accelgyro.h. - * e.g) compatible = "cros-ec,accelgyro-als-drv-data" is for - * "struct als_drv_data_t" in accelgyro.h - */ - motionsense-sensor-data { - lis2dw12_data: lis2dw12-drv-data { - compatible = "cros-ec,drvdata-lis2dw12"; - status = "okay"; - }; - - lsm6dso_accel_data: lsm6dso-accel-drv-data { - compatible = "cros-ec,drvdata-lsm6dso"; - status = "okay"; - }; - - lsm6dso_gyro_data: lsm6dso-gyro-drv-data { - compatible = "cros-ec,drvdata-lsm6dso"; - status = "okay"; - }; - - tcs_clear_data: tcs3400-clear-drv-data { - compatible = "cros-ec,drvdata-tcs3400-clear"; - status = "okay"; - - als-drv-data { - compatible = "cros-ec,accelgyro-als-drv-data"; - als-cal { - scale = <1>; - uscale = <0>; - offset = <0>; - als-channel-scale { - compatible = - "cros-ec,accelgyro-als-channel-scale"; - k-channel-scale = <1>; - cover-scale = <1>; - }; - }; - }; - }; - - tcs_rgb_data: tcs3400-rgb-drv-data { - compatible = "cros-ec,drvdata-tcs3400-rgb"; - status = "okay"; - - /* node for rgb_calibration_t defined in accelgyro.h */ - rgb_calibration { - compatible = - "cros-ec,accelgyro-rgb-calibration"; - - irt = <1>; - - rgb-cal-x { - offset = <0>; - coeff = <0 0 0 1>; - als-channel-scale { - compatible = - "cros-ec,accelgyro-als-channel-scale"; - k-channel-scale = <1>; - cover-scale = <1>; - }; - }; - rgb-cal-y { - offset = <0>; - coeff = <0 0 0 1>; - als-channel-scale { - compatible = - "cros-ec,accelgyro-als-channel-scale"; - k-channel-scale = <1>; - cover-scale = <1>; - }; - }; - rgb-cal-z { - offset = <0>; - coeff = <0 0 0 1>; - als-channel-scale { - compatible = - "cros-ec,accelgyro-als-channel-scale"; - k-channel-scale = <1>; - cover-scale = <1>; - }; - }; - }; - }; - }; - - /* - * List of motion sensors that creates motion_sensors array. - * The nodelabel "lid_accel" and "base_accel" are used to indicate - * motion sensor IDs for lid angle calculation. - */ - motionsense-sensor { - lid_accel: lid-accel { - compatible = "cros-ec,lis2dw12"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_LID"; - mutex = <&mutex_lis2dw12>; - port = <&i2c_sensor>; - rot-standard-ref = <&lid_rot_ref>; - default-range = <2>; - drv-data = <&lis2dw12_data>; - i2c-spi-addr-flags = "LIS2DWL_ADDR0_FLAGS"; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - ec-s3 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - }; - }; - - base_accel: base-accel { - compatible = "cros-ec,lsm6dso-accel"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&mutex_lsm6dso>; - port = <&i2c_sensor>; - rot-standard-ref = <&base_rot_ref>; - default-range = <4>; - drv-data = <&lsm6dso_accel_data>; - i2c-spi-addr-flags = "LSM6DSO_ADDR0_FLAGS"; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - odr = <(13000 | ROUND_UP_FLAG)>; - ec-rate = <(100 * USEC_PER_MSEC)>; - }; - ec-s3 { - odr = <(10000 | ROUND_UP_FLAG)>; - ec-rate = <(100 * USEC_PER_MSEC)>; - }; - }; - }; - - base-gyro { - compatible = "cros-ec,lsm6dso-gyro"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&mutex_lsm6dso>; - port = <&i2c_sensor>; - rot-standard-ref = <&base_rot_ref>; - default-range = <(1000 | ROUND_UP_FLAG)>; /* dps */ - drv-data = <&lsm6dso_gyro_data>; - i2c-spi-addr-flags = "LSM6DSO_ADDR0_FLAGS"; - }; - - als_clear: base-als-clear { - compatible = "cros-ec,tcs3400-clear"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_CAMERA"; - port = <&i2c_sensor>; - default-range = <0x10000>; - drv-data = <&tcs_clear_data>; - i2c-spi-addr-flags = "TCS3400_I2C_ADDR_FLAGS"; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - /* Run ALS sensor in S0 */ - odr = <1000>; - }; - }; - }; - - base-als-rgb { - compatible = "cros-ec,tcs3400-rgb"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_CAMERA"; - default-range = <0x10000>; /* scale = 1x, uscale = 0 */ - drv-data = <&tcs_rgb_data>; - }; - }; - - motionsense-sensor-info { - compatible = "cros-ec,motionsense-sensor-info"; - - /* list of entries for motion_als_sensors */ - als-sensors = <&als_clear>; - /* - * list of GPIO interrupts that have to - * be enabled at initial stage - */ - sensor-irqs = <&int_imu &int_als_rgb &int_accel>; - /* list of sensors in force mode */ - accel-force-mode-sensors = <&lid_accel &als_clear>; - }; -}; diff --git a/zephyr/program/brya/prj.conf b/zephyr/program/brya/prj.conf deleted file mode 100644 index 402db74994..0000000000 --- a/zephyr/program/brya/prj.conf +++ /dev/null @@ -1,175 +0,0 @@ -# Copyright 2021 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -CONFIG_CROS_EC=y -CONFIG_PLATFORM_EC=y -CONFIG_SHIMMED_TASKS=y -CONFIG_PLATFORM_EC_POWER_BUTTON=y -CONFIG_PLATFORM_EC_LID_SWITCH=y -CONFIG_PLATFORM_EC_SWITCH=y -CONFIG_LTO=y -CONFIG_CROS_SYSTEM_NPCX=y -CONFIG_PLATFORM_EC_VBOOT_EFS2=y -CONFIG_PLATFORM_EC_VBOOT_HASH=y -CONFIG_PLATFORM_EC_EXTPOWER_GPIO=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_SYSINFO=y - -CONFIG_PLATFORM_EC_ADC_CHANNELS_RUNTIME_CONFIG=y - -CONFIG_KERNEL_SHELL=y - -# SoC configuration -CONFIG_AP=y -CONFIG_AP_X86_INTEL_ADL=y -CONFIG_FPU=y -CONFIG_ARM_MPU=y - -# CBI -CONFIG_EEPROM=y -CONFIG_PLATFORM_EC_BOARD_VERSION_CBI=y - -# eSPI -CONFIG_ESPI=y -CONFIG_PLATFORM_EC_HOST_INTERFACE_ESPI_VW_SLP_S4=y -CONFIG_PLATFORM_EC_HOST_INTERFACE_ESPI_VW_SLP_S5=y -CONFIG_PLATFORM_EC_HOST_INTERFACE_ESPI_DEFAULT_VW_WIDTH_US=150 - -# Power Sequencing -CONFIG_PLATFORM_EC_POWERSEQ=y -CONFIG_PLATFORM_EC_POWERSEQ_RTC_RESET=y -CONFIG_PLATFORM_EC_POWERSEQ_S0IX=y -CONFIG_PLATFORM_EC_POWERSEQ_S4=y -CONFIG_PLATFORM_EC_POWER_SLEEP_FAILURE_DETECTION=y -CONFIG_PLATFORM_EC_THROTTLE_AP=y - -# Host command -CONFIG_PLATFORM_EC_HOSTCMD=y -CONFIG_PLATFORM_EC_HOSTCMD_AP_RESET=y - -# Console command -CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCELS=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCEL_INFO=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_I2C_SPEED=y - -# Sensors -CONFIG_SENSOR=y -CONFIG_SENSOR_SHELL=n -CONFIG_PLATFORM_EC_MOTIONSENSE=y -CONFIG_PLATFORM_EC_ACCEL_FIFO=y -CONFIG_PLATFORM_EC_ALS=y -CONFIG_PLATFORM_EC_DYNAMIC_MOTION_SENSOR_COUNT=y -CONFIG_PLATFORM_EC_GMR_TABLET_MODE=y -CONFIG_PLATFORM_EC_LID_ANGLE=y -CONFIG_PLATFORM_EC_LID_ANGLE_UPDATE=y -CONFIG_PLATFORM_EC_SENSOR_TIGHT_TIMESTAMPS=y -CONFIG_PLATFORM_EC_TABLET_MODE=y -CONFIG_PLATFORM_EC_TABLET_MODE_SWITCH=y - -# Sensor Drivers -CONFIG_PLATFORM_EC_ACCELGYRO_LSM6DSO=y -CONFIG_PLATFORM_EC_ACCEL_LIS2DW12=y -CONFIG_PLATFORM_EC_ALS_TCS3400=y - -# Temperature sensors -CONFIG_PLATFORM_EC_TEMP_SENSOR_POWER=y - -# MKBP event -CONFIG_PLATFORM_EC_MKBP_EVENT=y -CONFIG_PLATFORM_EC_MKBP_INPUT_DEVICES=y -CONFIG_PLATFORM_EC_MKBP_USE_GPIO_AND_HOST_EVENT=y - -# PMIC -CONFIG_PLATFORM_EC_PMIC=y - -# Keyboard -CONFIG_PLATFORM_EC_KEYBOARD_PROTOCOL_8042=y -CONFIG_PLATFORM_EC_KEYBOARD_COL2_INVERTED=y -CONFIG_PLATFORM_EC_KEYBOARD_KEYPAD=y -CONFIG_PLATFORM_EC_KEYBOARD_PWRBTN_ASSERTS_KSI3=y -CONFIG_PLATFORM_EC_VOLUME_BUTTONS=y -CONFIG_PLATFORM_EC_CMD_BUTTON=n - -CONFIG_PLATFORM_EC_WORKAROUND_FLASH_DOWNLOAD_API=y - -# Battery -CONFIG_PLATFORM_EC_BATTERY_SMART=y -CONFIG_PLATFORM_EC_BATTERY_FUEL_GAUGE=y -CONFIG_PLATFORM_EC_BATTERY_CUT_OFF=y -CONFIG_PLATFORM_EC_BATTERY_HW_PRESENT_CUSTOM=y -CONFIG_PLATFORM_EC_BATTERY_REVIVE_DISCONNECT=y - -# USB-C and charging -CONFIG_PLATFORM_EC_CHARGER_BQ25720=y -CONFIG_PLATFORM_EC_CHARGER_BQ25720_VSYS_TH2_CUSTOM=y -CONFIG_PLATFORM_EC_CHARGER_BQ25720_VSYS_TH2_DV=70 -CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC=y -CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC_CHARGER=y -CONFIG_PLATFORM_EC_CHARGER_MIN_INPUT_CURRENT_LIMIT=512 -CONFIG_PLATFORM_EC_CHARGER_MIN_BAT_PCT_FOR_POWER_ON=3 -CONFIG_PLATFORM_EC_CHARGER_MIN_BAT_PCT_FOR_POWER_ON_WITH_AC=1 -CONFIG_PLATFORM_EC_CHARGER_MIN_POWER_MW_FOR_POWER_ON_WITH_BATT=15000 -CONFIG_PLATFORM_EC_CHARGER_MIN_POWER_MW_FOR_POWER_ON=15001 -CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR=10 -CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR_AC=10 -CONFIG_PLATFORM_EC_CHARGE_RAMP_SW=y -CONFIG_PLATFORM_EC_USB_PID=0x504F -CONFIG_PLATFORM_EC_USBC_PPC_SYV682X=y -CONFIG_PLATFORM_EC_USBC_PPC_NX20P3483=y -CONFIG_PLATFORM_EC_USBC_RETIMER_INTEL_BB=y -CONFIG_PLATFORM_EC_USB_DRP_ACC_TRYSRC=y -CONFIG_PLATFORM_EC_USB_MUX_VIRTUAL=y -CONFIG_PLATFORM_EC_USB_MUX_RUNTIME_CONFIG=n -CONFIG_PLATFORM_EC_USB_MUX_TASK=y -CONFIG_PLATFORM_EC_USB_PD_DEBUG_FIXED_LEVEL=y -CONFIG_PLATFORM_EC_USB_PD_DEBUG_LEVEL=2 -CONFIG_PLATFORM_EC_USB_PD_ALT_MODE_UFP=y -CONFIG_PLATFORM_EC_USB_PD_VBUS_MEASURE_CHARGER=y -CONFIG_PLATFORM_EC_USB_PD_DISCHARGE_PPC=y -CONFIG_PLATFORM_EC_USB_PD_PPC=y -CONFIG_PLATFORM_EC_USB_PD_REV30=y -CONFIG_PLATFORM_EC_USB_PD_USB32_DRD=y -CONFIG_PLATFORM_EC_USB_PD_TBT_COMPAT_MODE=y -CONFIG_PLATFORM_EC_USB_PD_USB4=y -CONFIG_PLATFORM_EC_USB_PD_VBUS_DETECT_TCPC=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_PS8815=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_RT1715=n -CONFIG_PLATFORM_EC_USB_PD_TCPM_TUSB422=n -CONFIG_PLATFORM_EC_USB_PD_TCPM_NCT38XX=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_MUX=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_TCPCI=y -CONFIG_PLATFORM_EC_USBC_PPC_DEDICATED_INT=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_PPC_DUMP=n -CONFIG_PLATFORM_EC_CONSOLE_CMD_TCPC_DUMP=n -CONFIG_PLATFORM_EC_USB_PD_TCPC_RUNTIME_CONFIG=n -CONFIG_PLATFORM_EC_USB_PD_REQUIRE_AP_MODE_ENTRY=y -CONFIG_PLATFORM_EC_USB_PD_INT_SHARED=y -CONFIG_PLATFORM_EC_USB_PD_PORT_0_SHARED=y -CONFIG_PLATFORM_EC_USB_PD_PORT_2_SHARED=y - -CONFIG_SYSCON=y - -# LED -CONFIG_PLATFORM_EC_LED_COMMON=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_LEDTEST=n -CONFIG_PLATFORM_EC_LED_PWM_NEAR_FULL_COLOR=4 -CONFIG_PLATFORM_EC_LED_PWM_SOC_ON_COLOR=4 -CONFIG_PLATFORM_EC_LED_PWM_SOC_SUSPEND_COLOR=4 -CONFIG_PLATFORM_EC_LED_PWM_LOW_BATT_COLOR=5 - -# TODO(b/188605676): bring these features up -CONFIG_PLATFORM_EC_BOARD_VERSION_GPIO=n - -# Power Sequencing -CONFIG_PLATFORM_EC_POWERSEQ=y -CONFIG_PLATFORM_EC_POWERSEQ_PP5000_CONTROL=n -CONFIG_CHIPSET_ALDERLAKE_SLG4BD44540=y -CONFIG_PLATFORM_EC_POWERSEQ_RTC_RESET=n -CONFIG_PLATFORM_EC_POWERSEQ_S0IX=y -CONFIG_PLATFORM_EC_POWER_SLEEP_FAILURE_DETECTION=y -# Treat 2nd reset from H1 as Power-On -CONFIG_PLATFORM_EC_BOARD_RESET_AFTER_POWER_ON=y -CONFIG_PLATFORM_EC_THROTTLE_AP=y - -# RTC -CONFIG_PLATFORM_EC_RTC=y diff --git a/zephyr/program/brya/prj_brya.conf b/zephyr/program/brya/prj_brya.conf deleted file mode 100644 index 5aaf86a8c9..0000000000 --- a/zephyr/program/brya/prj_brya.conf +++ /dev/null @@ -1,6 +0,0 @@ -# Copyright 2022 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -# BRYA-NPCX9 reference-board-specific Kconfig settings. -CONFIG_BOARD_BRYA=y diff --git a/zephyr/program/brya/pwm_leds.dts b/zephyr/program/brya/pwm_leds.dts deleted file mode 100644 index 4321b4bd34..0000000000 --- a/zephyr/program/brya/pwm_leds.dts +++ /dev/null @@ -1,79 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - pwmleds { - compatible = "pwm-leds"; - pwm_led0: pwm_led_0 { - pwms = <&pwm2 0 PWM_HZ(4800) PWM_POLARITY_INVERTED - &pwm0 0 PWM_HZ(4800) PWM_POLARITY_INVERTED>; - }; - pwm_led1: pwm_led_1 { - pwms = <&pwm1 0 PWM_HZ(4800) PWM_POLARITY_INVERTED - &pwm7 0 PWM_HZ(4800) PWM_POLARITY_INVERTED>; - }; - }; - - cros-pwmleds { - compatible = "cros-ec,pwm-leds"; - - leds = <&pwm_led0 &pwm_led1>; - - /*<amber white>*/ - color-map-red = <0 0>; - color-map-green = <0 0>; - color-map-blue = <0 0>; - color-map-yellow = <0 0>; - color-map-white = <0 50>; - color-map-amber = <50 0>; - - brightness-range = <0 0 0 0 100 100>; - - #address-cells = <1>; - #size-cells = <0>; - - pwm_led_0@0 { - reg = <0>; - ec-led-name = "EC_LED_ID_LEFT_LED"; - }; - - pwm_led_1@1 { - reg = <1>; - ec-led-name = "EC_LED_ID_RIGHT_LED"; - }; - }; -}; - -/* LED2 */ -&pwm0 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; - pinctrl-0 = <&pwm0_gpc3>; - pinctrl-names = "default"; -}; - -/* LED3 */ -&pwm1 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; - pinctrl-0 = <&pwm1_gpc2>; - pinctrl-names = "default"; -}; - -/* LED1 */ -&pwm2 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; - pinctrl-0 = <&pwm2_gpc4>; - pinctrl-names = "default"; -}; - -/* LED4 */ -&pwm7 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; - pinctrl-0 = <&pwm7_gp60>; - pinctrl-names = "default"; -}; diff --git a/zephyr/program/brya/temp_sensors.dts b/zephyr/program/brya/temp_sensors.dts deleted file mode 100644 index ae436a2c6b..0000000000 --- a/zephyr/program/brya/temp_sensors.dts +++ /dev/null @@ -1,75 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <cros/thermistor/thermistor.dtsi> - -/ { - temp_ddr_soc: ddr_soc { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_30K9_47K_4050B>; - adc = <&adc_ddr_soc>; - }; - - temp_ambient: ambient { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_30K9_47K_4050B>; - adc = <&adc_ambient>; - }; - - temp_charger: charger { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_30K9_47K_4050B>; - adc = <&adc_charger>; - }; - - temp_wwan: wwan { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_30K9_47K_4050B>; - adc = <&adc_wwan>; - }; - - named-temp-sensors { - compatible = "cros-ec,temp-sensors"; - ddr_soc { - temp_fan_off = <35>; - temp_fan_max = <60>; - temp_host_high = <85>; - temp_host_halt = <90>; - temp_host_release_high = <80>; - sensor = <&temp_ddr_soc>; - }; - - ambient { - temp_fan_off = <35>; - temp_fan_max = <60>; - temp_host_high = <85>; - temp_host_halt = <90>; - temp_host_release_high = <80>; - sensor = <&temp_ambient>; - }; - - charger { - temp_fan_off = <35>; - temp_fan_max = <65>; - temp_host_high = <105>; - temp_host_halt = <120>; - temp_host_release_high = <90>; - sensor = <&temp_charger>; - }; - - wwan { - temp_fan_off = <35>; - temp_fan_max = <60>; - temp_host_high = <130>; - temp_host_halt = <130>; - temp_host_release_high = <100>; - sensor = <&temp_wwan>; - }; - }; -}; - -&thermistor_3V3_30K9_47K_4050B { - status = "okay"; -}; diff --git a/zephyr/program/brya/usbc.dts b/zephyr/program/brya/usbc.dts deleted file mode 100644 index 1be9ac94ac..0000000000 --- a/zephyr/program/brya/usbc.dts +++ /dev/null @@ -1,69 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - usbc { - #address-cells = <1>; - #size-cells = <0>; - - port0@0 { - compatible = "named-usbc-port"; - reg = <0>; - bc12 = <&bc12_port0>; - tcpc = <&tcpc_port0>; - chg = <&charger>; - usb-mux-chain-0 { - compatible = "cros-ec,usb-mux-chain"; - usb-muxes = <&usb_c0_bb_retimer - &virtual_mux_c0>; - }; - ppc = <&ppc_port0>; - }; - port0-muxes { - virtual_mux_c0: virtual-mux-c0 { - compatible = "cros-ec,usbc-mux-virtual"; - }; - }; - - port1@1 { - compatible = "named-usbc-port"; - reg = <1>; - bc12 = <&bc12_port1>; - tcpc = <&tcpc_port1>; - usb-mux-chain-1 { - compatible = "cros-ec,usb-mux-chain"; - usb-muxes = <&virtual_mux_c1 &tcpci_mux_c1>; - }; - ppc = <&ppc_port1>; - }; - port1-muxes { - tcpci_mux_c1: tcpci-mux-c1 { - compatible = "cros-ec,usbc-mux-tcpci"; - hpd-update = "ps8xxx_tcpc_update_hpd_status"; - }; - virtual_mux_c1: virtual-mux-c1 { - compatible = "cros-ec,usbc-mux-virtual"; - }; - }; - - port2@2 { - compatible = "named-usbc-port"; - reg = <2>; - bc12 = <&bc12_port2>; - tcpc = <&tcpc_port2>; - usb-mux-chain-2 { - compatible = "cros-ec,usb-mux-chain"; - usb-muxes = <&usb_c2_bb_retimer - &virtual_mux_c2>; - }; - ppc = <&ppc_port2>; - }; - port2-muxes { - virtual_mux_c2: virtual-mux-c2 { - compatible = "cros-ec,usbc-mux-virtual"; - }; - }; - }; -}; |