1 files changed, 0 insertions, 114 deletions
diff --git a/zephyr/program/corsola/npcx_interrupts.dtsi b/zephyr/program/corsola/npcx_interrupts.dtsi
deleted file mode 100644
index f3da785a60..0000000000
--- a/zephyr/program/corsola/npcx_interrupts.dtsi
+++ /dev/null
@@ -1,114 +0,0 @@
-/* Copyright 2022 The ChromiumOS Authors
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/*
- * Kingler and Steelix use the same dts, take care of this when modify it.
- */
-
-/ {
-	aliases {
-		int-wp = &int_wp;
-	};
-
-	gpio-interrupts {
-		compatible = "cros-ec,gpio-interrupts";
-
-		int_power_button: power_button {
-			irq-pin = <&gpio_gsc_ec_pwr_btn_odl>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "power_button_interrupt";
-		};
-		int_volume_up: volume_up {
-			irq-pin = <&gpio_ec_volup_btn_odl>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "button_interrupt";
-		};
-		int_volume_down: volume_down {
-			irq-pin = <&gpio_ec_voldn_btn_odl>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "button_interrupt";
-		};
-		int_lid_open: lid_open {
-			irq-pin = <&gpio_lid_open>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "lid_interrupt";
-		};
-		int_warm_rst: warm_rst {
-			irq-pin = <&ap_ec_warm_rst_req>;
-			flags = <GPIO_INT_EDGE_RISING>;
-			handler = "chipset_reset_request_interrupt";
-		};
-		int_ap_in_sleep: ap_in_sleep {
-			irq-pin = <&ap_in_sleep_l>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "power_signal_interrupt";
-		};
-		int_ap_in_rst: ap_in_rst {
-			irq-pin = <&ap_sysrst_odl_r>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "power_signal_interrupt";
-		};
-		int_ap_wdtrst: ap_wdtrst {
-			irq-pin = <&ap_ec_wdtrst_l>;
-			flags = <GPIO_INT_EDGE_FALLING>;
-			handler = "chipset_watchdog_interrupt";
-		};
-		int_ac_present: ac_present {
-			irq-pin = <&gpio_acok_od>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "extpower_interrupt";
-		};
-		int_usba: usba {
-			irq-pin = <&gpio_ap_xhci_init_done>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "usb_a0_interrupt";
-		};
-		int_wp: wp {
-			irq-pin = <&gpio_ec_wp_l>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "switch_interrupt";
-		};
-		int_usb_c0_tcpc: usb_c0_tcpc {
-			irq-pin = <&gpio_usb_c0_tcpc_int_odl>;
-			flags = <GPIO_INT_EDGE_FALLING>;
-			handler = "tcpc_alert_event";
-		};
-		int_usb_c1_tcpc: usb_c1_tcpc {
-			irq-pin = <&gpio_usb_c1_tcpc_int_odl>;
-			flags = <GPIO_INT_EDGE_FALLING>;
-			handler = "tcpc_alert_event";
-		};
-		int_usb_c0_ppc: usb_c0_ppc {
-			irq-pin = <&gpio_usb_c0_ppc_int_odl>;
-			flags = <GPIO_INT_EDGE_FALLING>;
-			handler = "ppc_interrupt";
-		};
-		int_usb_c0_bc12: usb_c0_bc12 {
-			irq-pin = <&gpio_usb_c0_bc12_int_odl>;
-			flags = <GPIO_INT_EDGE_FALLING>;
-			handler = "bc12_interrupt";
-		};
-		int_x_ec_gpio2: x_ec_gpio2 {
-			irq-pin = <&gpio_x_ec_gpio2>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "x_ec_interrupt";
-		};
-		int_base_imu: base_imu {
-			irq-pin = <&base_imu_int_l>;
-			flags = <GPIO_INT_EDGE_FALLING>;
-			handler = "bmi3xx_interrupt";
-		};
-		int_tablet_mode: tablet_mode {
-			irq-pin = <&gpio_tablet_mode_l>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "gmr_tablet_switch_isr";
-		};
-		int_ccd_mode_odl: ccd-mode-odl {
-			irq-pin = <&gpio_ccd_mode_odl>;
-			flags = <GPIO_INT_EDGE_FALLING>;
-			handler = "ccd_interrupt";
-		};
-	};
-};