diff options
Diffstat (limited to 'zephyr/program/corsola/src')
-rw-r--r-- | zephyr/program/corsola/src/npcx_usbc.c | 30 | ||||
-rw-r--r-- | zephyr/program/corsola/src/usbc.c | 2 |
2 files changed, 24 insertions, 8 deletions
diff --git a/zephyr/program/corsola/src/npcx_usbc.c b/zephyr/program/corsola/src/npcx_usbc.c index 10a977696e..2e1d8d11c5 100644 --- a/zephyr/program/corsola/src/npcx_usbc.c +++ b/zephyr/program/corsola/src/npcx_usbc.c @@ -11,6 +11,7 @@ #endif #include "baseboard_usbc_config.h" +#include "battery.h" #include "console.h" #include "driver/ppc/nx20p348x.h" #include "driver/tcpm/anx7447.h" @@ -53,8 +54,10 @@ DECLARE_HOOK(HOOK_INIT, board_usb_mux_init, HOOK_PRIO_INIT_I2C + 1); void board_tcpc_init(void) { - /* Only reset TCPC if not sysjump */ - if (!system_jumped_late()) { + /* Reset TCPC if we only we have a battery connected, or the SINK + * gpio to the PPC might be reset and cause brown-out. + */ + if (!system_jumped_late() && battery_is_present() == BP_YES) { /* TODO(crosbug.com/p/61098): How long do we need to wait? */ board_reset_pd_mcu(); } @@ -84,7 +87,13 @@ __override int board_rt1718s_init(int port) { static bool gpio_initialized; - if (!system_jumped_late() && !gpio_initialized) { + /* Reset TCPC sink/source control when it's a power-on reset or has a + * battery. Do not alter the carried GPIO status or this might stop PPC + * sinking and brown-out the system when battery disconnected. + */ + if (!system_jumped_late() && !gpio_initialized && + (battery_is_present() == BP_YES || + (system_get_reset_flags() & EC_RESET_FLAG_POWER_ON))) { /* set GPIO 1~3 as push pull, as output, output low. */ rt1718s_gpio_set_flags(port, RT1718S_GPIO1, GPIO_OUT_LOW); rt1718s_gpio_set_flags(port, RT1718S_GPIO2, GPIO_OUT_LOW); @@ -94,11 +103,18 @@ __override int board_rt1718s_init(int port) /* gpio1 low, gpio2 output high when receiving frs signal */ RETURN_ERROR(rt1718s_update_bits8(port, RT1718S_GPIO1_VBUS_CTRL, - RT1718S_GPIO1_VBUS_CTRL_FRS_RX_VBUS, + RT1718S_GPIO_VBUS_CTRL_FRS_RX_VBUS, 0)); - RETURN_ERROR(rt1718s_update_bits8(port, RT1718S_GPIO2_VBUS_CTRL, - RT1718S_GPIO2_VBUS_CTRL_FRS_RX_VBUS, - 0xFF)); + /* GPIO1 EN_SNK high when received TCPCI SNK enabled command */ + RETURN_ERROR(rt1718s_update_bits8( + port, RT1718S_GPIO1_VBUS_CTRL, + RT1718S_GPIO_VBUS_CTRL_ENA_SNK_VBUS_GPIO, 0xFF)); + /* GPIO2 EN_SRC high when received TCPCI SRC enabled command */ + RETURN_ERROR(rt1718s_update_bits8( + port, RT1718S_GPIO2_VBUS_CTRL, + RT1718S_GPIO_VBUS_CTRL_FRS_RX_VBUS | + RT1718S_GPIO_VBUS_CTRL_ENA_SRC_VBUS_GPIO, + 0xFF)); /* Trigger GPIO 1/2 change when FRS signal received */ RETURN_ERROR(rt1718s_update_bits8( diff --git a/zephyr/program/corsola/src/usbc.c b/zephyr/program/corsola/src/usbc.c index 181b3df141..71c02ff54f 100644 --- a/zephyr/program/corsola/src/usbc.c +++ b/zephyr/program/corsola/src/usbc.c @@ -6,7 +6,7 @@ /* Corsola baseboard-specific USB-C configuration */ #include "baseboard_usbc_config.h" -#include "charge_state_v2.h" +#include "charge_state.h" #include "console.h" #include "ec_commands.h" #include "extpower.h" |