1 files changed, 0 insertions, 110 deletions
diff --git a/zephyr/projects/corsola/interrupts_krabby.dts b/zephyr/projects/corsola/interrupts_krabby.dts
deleted file mode 100644
index 3caf4660ae..0000000000
--- a/zephyr/projects/corsola/interrupts_krabby.dts
+++ /dev/null
@@ -1,110 +0,0 @@
-/* Copyright 2022 The ChromiumOS Authors
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/ {
-	aliases {
-		int-wp = &int_wp;
-	};
-
-	gpio-interrupts {
-		compatible = "cros-ec,gpio-interrupts";
-
-		int_power_button: power_button {
-			irq-pin = <&power_button_l>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "power_button_interrupt";
-		};
-		int_volume_up: volume_up {
-			irq-pin = <&volume_up_l>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "button_interrupt";
-		};
-		int_volume_down: volume_down {
-			irq-pin = <&volume_down_l>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "button_interrupt";
-		};
-		int_lid_open: lid_open {
-			irq-pin = <&lid_open>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "lid_interrupt";
-		};
-		int_warm_rst: warm_rst {
-			irq-pin = <&ap_ec_warm_rst_req>;
-			flags = <GPIO_INT_EDGE_RISING>;
-			handler = "chipset_reset_request_interrupt";
-		};
-		int_ap_in_sleep: ap_in_sleep {
-			irq-pin = <&ap_in_sleep_l>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "power_signal_interrupt";
-		};
-		int_ap_in_rst: ap_in_rst {
-			irq-pin = <&ap_sysrst_odl_r>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "power_signal_interrupt";
-		};
-		int_ap_wdtrst: ap_wdtrst {
-			irq-pin = <&ap_ec_wdtrst_l>;
-			flags = <GPIO_INT_EDGE_FALLING>;
-			handler = "chipset_watchdog_interrupt";
-		};
-		int_tablet_mode: tablet_mode {
-			irq-pin = <&tablet_mode_l>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "gmr_tablet_switch_isr";
-		};
-		int_base_imu: base_imu {
-			irq-pin = <&base_imu_int_l>;
-			flags = <GPIO_INT_EDGE_FALLING>;
-			handler = "icm42607_interrupt";
-		};
-		int_lid_imu: lid_imu {
-			irq-pin = <&lid_accel_int_l>;
-			flags = <GPIO_INT_EDGE_FALLING>;
-			handler = "lis2dw12_interrupt";
-		};
-		int_ac_present: ac_present {
-			irq-pin = <&ac_present>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "extpower_interrupt";
-		};
-		int_usba: usba {
-			irq-pin = <&gpio_ap_xhci_init_done>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "usb_a0_interrupt";
-		};
-		int_wp: wp {
-			irq-pin = <&ec_flash_wp_odl>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "switch_interrupt";
-		};
-		int_spi0_cs: spi0_cs {
-			irq-pin = <&spi0_cs>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "spi_event";
-		};
-		int_x_ec_gpio2: x_ec_gpio2 {
-			irq-pin = <&gpio_x_ec_gpio2>;
-			flags = <GPIO_INT_EDGE_BOTH>;
-			handler = "x_ec_interrupt";
-		};
-		int_usb_c0_ppc_bc12: usb_c0_ppc_bc12 {
-			irq-pin = <&usb_c0_ppc_bc12_int_odl>;
-			flags = <GPIO_INT_EDGE_FALLING>;
-			handler = "c0_bc12_interrupt";
-		};
-		int_usb_c1_bc12_charger: usb_c1_bc12_charger {
-			irq-pin = <&usb_c1_bc12_charger_int_odl>;
-			flags = <GPIO_INT_EDGE_FALLING>;
-			handler = "rt9490_bc12_dt_interrupt";
-		};
-		int_ccd_mode_odl: ccd-mode-odl {
-			irq-pin = <&gpio_ccd_mode_odl>;
-			flags = <GPIO_INT_EDGE_FALLING>;
-			handler = "ccd_interrupt";
-		};
-	};
-};