diff options
Diffstat (limited to 'zephyr/projects/herobrine/gpio_villager.dts')
-rw-r--r-- | zephyr/projects/herobrine/gpio_villager.dts | 323 |
1 files changed, 0 insertions, 323 deletions
diff --git a/zephyr/projects/herobrine/gpio_villager.dts b/zephyr/projects/herobrine/gpio_villager.dts deleted file mode 100644 index 1e7625ff6a..0000000000 --- a/zephyr/projects/herobrine/gpio_villager.dts +++ /dev/null @@ -1,323 +0,0 @@ -/* Copyright 2021 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - aliases { - gpio-wp = &gpio_ec_wp_odl; - gpio-kbd-kso2 = &gpio_ec_kso_02_inv; - }; - - named-gpios { - compatible = "named-gpios"; - - gpio_usb_c0_pd_int_odl: usb_c0_pd_int_odl { - gpios = <&gpioe 0 GPIO_INPUT>; - enum-name = "GPIO_USB_C0_PD_INT_ODL"; - }; - gpio_usb_c1_pd_int_odl: usb_c1_pd_int_odl { - gpios = <&gpiof 5 GPIO_INPUT>; - enum-name = "GPIO_USB_C1_PD_INT_ODL"; - }; - gpio_usb_c0_swctl_int_odl: usb_c0_swctl_int_odl { - gpios = <&gpio0 3 GPIO_INPUT>; - enum-name = "GPIO_USB_C0_SWCTL_INT_ODL"; - }; - gpio_usb_c1_swctl_int_odl: usb_c1_swctl_int_odl { - gpios = <&gpio4 0 GPIO_INPUT>; - enum-name = "GPIO_USB_C1_SWCTL_INT_ODL"; - }; - gpio_usb_c0_bc12_int_l: usb_c0_bc12_int_l { - gpios = <&gpio6 1 GPIO_INPUT_PULL_UP>; - }; - gpio_usb_c1_bc12_int_l: usb_c1_bc12_int_l { - gpios = <&gpio8 2 GPIO_INPUT_PULL_UP>; - }; - gpio_usb_a0_oc_odl: usb_a0_oc_odl { - gpios = <&gpiof 4 GPIO_INPUT_PULL_UP>; - }; - gpio_chg_acok_od: chg_acok_od { - gpios = <&gpiod 2 GPIO_INPUT>; - enum-name = "GPIO_AC_PRESENT"; - }; - gpio_ec_pwr_btn_odl: ec_pwr_btn_odl { - gpios = <&gpio0 0 GPIO_INPUT>; - enum-name = "GPIO_POWER_BUTTON_L"; - }; - gpio_ec_voldn_btn_odl: ec_voldn_btn_odl { - gpios = <&gpio6 2 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_VOLUME_DOWN_L"; - }; - gpio_ec_volup_btn_odl: ec_volup_btn_odl { - gpios = <&gpioc 2 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_VOLUME_UP_L"; - }; - gpio_ec_wp_odl: ec_wp_odl { - gpios = <&gpiod 3 (GPIO_INPUT | GPIO_ACTIVE_LOW)>; - }; - gpio_lid_open_ec: lid_open_ec { - gpios = <&gpio0 1 GPIO_INPUT>; - enum-name = "GPIO_LID_OPEN"; - }; - gpio_ap_rst_l: ap_rst_l { - gpios = <&gpio5 1 GPIO_INPUT>; - enum-name = "GPIO_AP_RST_L"; - }; - gpio_ps_hold: ps_hold { - gpios = <&gpioa 6 GPIO_INPUT_PULL_DOWN>; - enum-name = "GPIO_PS_HOLD"; - }; - gpio_ap_suspend: ap_suspend { - gpios = <&gpio5 7 GPIO_INPUT>; - enum-name = "GPIO_AP_SUSPEND"; - }; - gpio_mb_power_good: mb_power_good { - gpios = <&gpio3 7 GPIO_INPUT_PULL_DOWN>; - enum-name = "GPIO_POWER_GOOD"; - }; - gpio_warm_reset_l: warm_reset_l { - gpios = <&gpiob 0 GPIO_INPUT>; - enum-name = "GPIO_WARM_RESET_L"; - }; - ap_ec_spi_cs_l { - gpios = <&gpio5 3 GPIO_INPUT_PULL_DOWN>; - }; - gpio_tablet_mode_l: tablet_mode_l { - gpios = <&gpioc 6 GPIO_INPUT>; - enum-name = "GPIO_TABLET_MODE_L"; - }; - gpio_accel_gyro_int_l: accel_gyro_int_l { - gpios = <&gpioa 3 GPIO_INPUT>; - }; - gpio_rtc_ec_wake_odl: rtc_ec_wake_odl { - gpios = <&gpio0 2 GPIO_INPUT>; - }; - ec_entering_rw { - gpios = <&gpio7 2 GPIO_OUTPUT_LOW>; - enum-name = "GPIO_ENTERING_RW"; - }; - ccd_mode_odl { - gpios = <&gpio6 3 GPIO_INPUT>; - enum-name = "GPIO_CCD_MODE_ODL"; - }; - ec_batt_pres_odl { - gpios = <&gpioe 5 GPIO_INPUT>; - enum-name = "GPIO_BATT_PRES_ODL"; - }; - ec_gsc_packet_mode { - gpios = <&gpio8 3 GPIO_OUTPUT_LOW>; - enum-name = "GPIO_PACKET_MODE_EN"; - }; - pmic_resin_l { - gpios = <&gpioa 0 GPIO_ODR_HIGH>; - enum-name = "GPIO_PMIC_RESIN_L"; - }; - pmic_kpd_pwr_odl { - gpios = <&gpioa 2 GPIO_ODR_HIGH>; - enum-name = "GPIO_PMIC_KPD_PWR_ODL"; - }; - ap_ec_int_l { - gpios = <&gpio5 6 GPIO_ODR_HIGH>; - enum-name = "GPIO_EC_INT_L"; - }; - gpio_switchcap_on: switchcap_on { - gpios = <&gpiod 5 GPIO_OUTPUT_LOW>; - enum-name = "GPIO_SWITCHCAP_ON"; - }; - gpio_en_pp5000_s5: en_pp5000_s5 { - gpios = <&gpio7 3 GPIO_OUTPUT_HIGH>; - enum-name = "GPIO_EN_PP5000"; - }; - ec_bl_disable_l { - /* The PMIC controls backlight enable and this pin must - * be HiZ for normal operation. But the backlight can - * be enabled by setting this pin low and configuring it - * as an output. - */ - gpios = <&gpiob 6 GPIO_INPUT>; - enum-name = "GPIO_ENABLE_BACKLIGHT"; - }; - lid_accel_int_l { - gpios = <&gpioa 1 GPIO_INPUT>; - }; - tp_int_gate { - gpios = <&gpio7 4 GPIO_OUTPUT_LOW>; - }; - gpio_usb_c0_pd_rst_l: usb_c0_pd_rst_l { - gpios = <&gpiof 1 GPIO_OUTPUT_HIGH>; - }; - gpio_usb_c1_pd_rst_l: usb_c1_pd_rst_l { - gpios = <&gpioe 4 GPIO_OUTPUT_HIGH>; - }; - gpio_dp_mux_oe_l: dp_mux_oe_l { - gpios = <&gpiob 1 GPIO_ODR_HIGH>; - }; - gpio_dp_mux_sel: dp_mux_sel { - gpios = <&gpio4 5 GPIO_OUTPUT_LOW>; - }; - gpio_dp_hot_plug_det_r: dp_hot_plug_det_r { - gpios = <&gpio9 5 GPIO_OUTPUT_LOW>; - }; - gpio_en_usb_a_5v: en_usb_a_5v { - gpios = <&gpiof 0 GPIO_OUTPUT_LOW>; - enum-name = "GPIO_EN_USB_A_5V"; - }; - usb_a_cdp_ilim_en_l { - gpios = <&gpio7 5 GPIO_OUTPUT_HIGH>; - }; - gpio_usb_c0_frs_en: usb_c0_frs_en { - gpios = <&gpioc 5 GPIO_OUTPUT_LOW>; - enum-name = "GPIO_USB_C0_FRS_EN"; - }; - gpio_usb_c1_frs_en: usb_c1_frs_en { - gpios = <&gpioc 1 GPIO_OUTPUT_LOW>; - enum-name = "GPIO_USB_C1_FRS_EN"; - }; - gpio_ec_chg_led_y_c0: ec_chg_led_y_c0 { - #led-pin-cells = <1>; - gpios = <&gpio6 0 GPIO_OUTPUT_LOW>; - }; - gpio_ec_chg_led_b_c0: ec_chg_led_b_c0 { - #led-pin-cells = <1>; - gpios = <&gpioc 0 GPIO_OUTPUT_LOW>; - }; - ap_ec_spi_mosi { - gpios = <&gpio4 6 GPIO_INPUT_PULL_DOWN>; - }; - ap_ec_spi_miso { - gpios = <&gpio4 7 GPIO_INPUT_PULL_DOWN>; - }; - ap_ec_spi_clk { - gpios = <&gpio5 5 GPIO_INPUT_PULL_DOWN>; - }; - gpio_brd_id0: brd_id0 { - gpios = <&gpio9 4 GPIO_INPUT>; - enum-name = "GPIO_BOARD_VERSION1"; - }; - gpio_brd_id1: brd_id1 { - gpios = <&gpio9 7 GPIO_INPUT>; - enum-name = "GPIO_BOARD_VERSION2"; - }; - gpio_brd_id2: brd_id2 { - gpios = <&gpioa 5 GPIO_INPUT>; - enum-name = "GPIO_BOARD_VERSION3"; - }; - gpio_sku_id0: sku_id0 { - gpios = <&gpio6 7 GPIO_INPUT>; - }; - gpio_sku_id1: sku_id1 { - gpios = <&gpio7 0 GPIO_INPUT>; - }; - gpio_sku_id2: sku_id2 { - gpios = <&gpioe 1 GPIO_INPUT>; - }; - gpio_switchcap_pg: src_vph_pwr_pg { - gpios = <&gpioe 2 GPIO_INPUT_PULL_DOWN>; - enum-name = "GPIO_SWITCHCAP_PG"; - }; - arm_x86 { - gpios = <&gpio6 6 GPIO_OUTPUT_LOW>; - }; - ec-i2c-sensor-scl { - gpios = <&gpiob 3 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - }; - ec-i2c-sensor-sda { - gpios = <&gpiob 2 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - }; - gpio_ec_kso_02_inv: ec_kso_02_inv { - gpios = <&gpio1 7 (GPIO_OUTPUT_LOW | GPIO_ACTIVE_LOW)>; - }; - }; - - usba-port-enable-list { - compatible = "cros-ec,usba-port-enable-pins"; - enable-pins = <&gpio_en_usb_a_5v>; - }; - - sku { - compatible = "cros-ec,gpio-id"; - - bits = < - &gpio_sku_id0 - &gpio_sku_id1 - &gpio_sku_id2 - >; - - system = "ternary"; - }; - - board { - compatible = "cros-ec,gpio-id"; - - bits = < - &gpio_brd_id0 - &gpio_brd_id1 - &gpio_brd_id2 - >; - - system = "ternary"; - }; - - unused-pins { - compatible = "unused-gpios"; - unused-gpios = - <&gpio5 2 0>, - <&gpio5 4 0>, - <&gpio7 6 0>, - <&gpiod 1 0>, - <&gpiod 0 0>, - <&gpioe 3 0>, - <&gpio0 4 0>, - <&gpiod 6 0>, - <&gpio3 2 0>, - <&gpio3 5 0>, - <&gpiod 7 0>, - <&gpio8 6 0>, - <&gpiod 4 0>, - <&gpio4 1 0>, - <&gpio3 4 0>, - <&gpioc 3 0>, - <&gpioc 4 0>, - <&gpioc 7 0>, - <&gpioa 4 0>, - <&gpio9 6 0>, - <&gpio9 3 0>, - <&gpioa 7 0>, - <&gpio5 0 0>, - <&gpio8 1 0>, - <&gpiob 7 0>; - }; -}; - -/* Power switch logic input pads */ -&psl_in1_gpd2 { - /* ACOK_OD */ - psl-in-mode = "edge"; - psl-in-pol = "high-rising"; -}; - -&psl_in2_gp00 { - /* EC_PWR_BTN_ODL */ - psl-in-mode = "edge"; - psl-in-pol = "low-falling"; -}; - -&psl_in3_gp01 { - /* LID_OPEN_EC */ - psl-in-mode = "edge"; - psl-in-pol = "high-rising"; -}; - -&psl_in4_gp02 { - /* RTC_EC_WAKE_ODL */ - psl-in-mode = "edge"; - psl-in-pol = "low-falling"; -}; - -/* Power domain device controlled by PSL (Power Switch Logic) IO pads */ -&power_ctrl_psl { - status = "okay"; - pinctrl-names = "sleep"; - pinctrl-0 = <&psl_in1_gpd2 &psl_in2_gp00 &psl_in3_gp01 &psl_in4_gp02>; -}; |