diff options
Diffstat (limited to 'zephyr/projects/skyrim/guybrush.dts')
-rw-r--r-- | zephyr/projects/skyrim/guybrush.dts | 198 |
1 files changed, 0 insertions, 198 deletions
diff --git a/zephyr/projects/skyrim/guybrush.dts b/zephyr/projects/skyrim/guybrush.dts deleted file mode 100644 index 6c5c72d061..0000000000 --- a/zephyr/projects/skyrim/guybrush.dts +++ /dev/null @@ -1,198 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - aliases { - gpio-wp = &gpio_wp; - gpio-kbd-kso2 = &gpio_ec_kso_02_inv; - }; - - named-gpios { - /* Guybrush-specific GPIO customizations */ - gpio_wp: ec_wp_l { - gpios = <&gpio5 0 (GPIO_INPUT | GPIO_ACTIVE_LOW)>; - }; - gpio_ec_pwr_btn_odl: ec_pwr_btn_odl { - gpios = <&gpio0 1 GPIO_INPUT>; - }; - gpio_slp_s3_s0i3_l: slp_s3_s0i3_l { - gpios = <&gpio7 4 GPIO_INPUT>; - enum-name = "GPIO_PCH_SLP_S0_L"; - }; - gpio_ec_pcore_int_odl: ec_pcore_int_odl { - gpios = <&gpiof 0 GPIO_INPUT_PULL_UP>; - }; - gpio_pg_groupc_s0_od: pg_groupc_s0_od { - gpios = <&gpioa 3 GPIO_INPUT>; - }; - gpio_pg_lpddr4x_s3_od: pg_lpddr4x_s3_od { - gpios = <&gpio9 5 GPIO_INPUT>; - }; - ec_soc_pwr_good { - gpios = <&gpiod 3 GPIO_OUTPUT_LOW>; - enum-name = "GPIO_PCH_SYS_PWROK"; - }; - ec_entering_rw { - gpios = <&gpio6 6 GPIO_OUTPUT_LOW>; - enum-name = "GPIO_ENTERING_RW"; - }; - ec_clr_cmos { - gpios = <&gpioa 1 GPIO_OUTPUT_LOW>; - }; - ec_mem_event { - gpios = <&gpioa 5 GPIO_OUTPUT_LOW>; - }; - gpio_ec_soc_pwr_btn_l: ec_soc_pwr_btn_l { - gpios = <&gpio6 3 GPIO_OUTPUT_HIGH>; - enum-name = "GPIO_PCH_PWRBTN_L"; - }; - ec_soc_int_l { - gpios = <&gpio8 3 GPIO_OUTPUT_HIGH>; - enum-name = "GPIO_EC_INT_L"; - }; - soc_thermtrip_odl { - gpios = <&gpioe 5 GPIO_INPUT>; - }; - gpio_usb_c0_c1_fault_odl: usb_c0_c1_fault_odl { - gpios = <&gpio7 3 GPIO_ODR_HIGH>; - }; - 3axis_int_l { - gpios = <&gpioa 2 GPIO_INPUT_PULL_DOWN>; - }; - gpio_voldn_btn_odl: voldn_btn_odl { - gpios = <&gpioa 7 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_VOLUME_DOWN_L"; - }; - gpio_volup_btn_odl: volup_btn_odl { - gpios = <&gpio9 3 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_VOLUME_UP_L"; - }; - ec_ps2_clk { - gpios = <&gpio6 7 GPIO_INPUT_PULL_UP>; - }; - ec_ps2_dat { - gpios = <&gpio7 0 GPIO_INPUT_PULL_UP>; - }; - ec_ps2_rst { - gpios = <&gpio6 2 GPIO_INPUT_PULL_UP>; - }; - ec_gpiob0 { - gpios = <&gpiob 0 GPIO_INPUT_PULL_UP>; - }; - ec_gpio81 { - gpios = <&gpio8 1 GPIO_INPUT_PULL_UP>; - }; - ec_psl_gpo { - gpios = <&gpiod 7 GPIO_INPUT_PULL_UP>; - }; - ec_pwm7 { - gpios = <&gpio6 0 GPIO_INPUT_PULL_UP>; - }; - gpio_accel_gyro_int_l: accel_gyro_int_l { - gpios = <&gpioa 0 GPIO_INPUT_PULL_UP>; - }; - }; - - def-lvol-io-list { - compatible = "nuvoton,npcx-lvolctrl-def"; - - /* Low voltage on I2C6_1 */ - lvol-io-pads = <&lvol_ioe4 &lvol_ioe3>; - }; - - named-adc-channels { - compatible = "named-adc-channels"; - - adc_temp_soc: temp-soc { - label = "SOC"; - enum-name = "ADC_TEMP_SENSOR_SOC"; - io-channels = <&adc0 0>; - }; - }; - - named-temp-sensors { - soc-tmp112 { - compatible = "cros-ec,temp-sensor-tmp112", - "cros-ec,temp-sensor"; - label = "SOC"; - enum-name = "TEMP_SENSOR_SOC"; - tmp112-name = "TMP112_SOC"; - port = <&i2c_sensor>; - i2c-addr-flags = "TMP112_I2C_ADDR_FLAGS0"; - temp_host_high = <100>; - temp_host_halt = <105>; - temp_host_release_high = <80>; - temp_fan_off = <0>; - temp_fan_max = <70>; - }; - amb-tmp112 { - compatible = "cros-ec,temp-sensor-tmp112", - "cros-ec,temp-sensor"; - label = "Ambient"; - enum-name = "TEMP_SENSOR_AMB"; - tmp112-name = "TMP112_AMB"; - port = <&i2c_sensor>; - i2c-addr-flags = "TMP112_I2C_ADDR_FLAGS1"; - }; - }; - - gpio-interrupts { - compatible = "cros-ec,gpio-interrupts"; - - int_pg_lpddr4x_s3: pg_lpddr4x_s3 { - irq-pin = <&gpio_pg_lpddr4x_s3_od>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "baseboard_en_pwr_pcore_s0"; - }; - int_slp_s3_s0i3: slp_s3_s0i3 { - irq-pin = <&gpio_slp_s3_s0i3_l>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "power_signal_interrupt"; - }; - int_ec_pwr_btn: ec_pwr_btn { - irq-pin = <&gpio_ec_pwr_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "power_signal_interrupt"; - }; - int_ec_pcore: ec_pcore { - irq-pin = <&gpio_ec_pcore_int_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "power_signal_interrupt"; - }; - int_pg_groupc_s0: pg_groupc_s0 { - irq-pin = <&gpio_pg_groupc_s0_od>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "baseboard_en_pwr_pcore_s0"; - }; - int_s0_pgood: s0_pgood { - irq-pin = <&gpio_s0_pgood>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "power_signal_interrupt"; - }; - }; - - /* Rotation matrices for motion sensors. */ - motionsense-rotation-ref { - compatible = "cros-ec,motionsense-rotation-ref"; - lid_rot_ref: lid-rotation-ref { - mat33 = <0 (-1) 0 - (-1) 0 0 - 0 0 (-1)>; - }; - - base_rot_ref: base-rotation-ref { - mat33 = <(-1) 0 0 - 0 1 0 - 0 0 (-1)>; - }; - }; -}; - -/* host interface */ -&espi0 { - status = "okay"; - pinctrl-0 = <&espi_lpc_gp46_47_51_52_53_54_55_57>; - pinctrl-names = "default"; -}; |