diff options
Diffstat (limited to 'zephyr/projects/trogdor')
25 files changed, 2355 insertions, 0 deletions
diff --git a/zephyr/projects/trogdor/lazor/BUILD.py b/zephyr/projects/trogdor/lazor/BUILD.py new file mode 100644 index 0000000000..ca1a26bdcf --- /dev/null +++ b/zephyr/projects/trogdor/lazor/BUILD.py @@ -0,0 +1,25 @@ +# Copyright 2021 The ChromiumOS Authors +# Use of this source code is governed by a BSD-style license that can be +# found in the LICENSE file. + +"""Define zmake projects for lazor.""" + +register_npcx_project( + project_name="lazor", + zephyr_board="npcx7", + dts_overlays=[ + "adc.dts", + "battery.dts", + "display.dts", + "gpio.dts", + "i2c.dts", + "host_interface_npcx.dts", + "interrupts.dts", + "keyboard.dts", + "led.dts", + "motionsense.dts", + "pwm_led.dts", + "usbc.dts", + "default_gpio_pinctrl.dts", + ], +) diff --git a/zephyr/projects/trogdor/lazor/CMakeLists.txt b/zephyr/projects/trogdor/lazor/CMakeLists.txt new file mode 100644 index 0000000000..b6d5024707 --- /dev/null +++ b/zephyr/projects/trogdor/lazor/CMakeLists.txt @@ -0,0 +1,23 @@ +# Copyright 2021 The ChromiumOS Authors +# Use of this source code is governed by a BSD-style license that can be +# found in the LICENSE file. + +cmake_minimum_required(VERSION 3.13.1) + +find_package(Zephyr REQUIRED HINTS "${ZEPHYR_BASE}") +project(lazor) + +cros_ec_library_include_directories(include) + +zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_USBC + "src/power.c" + "src/usb_pd_policy.c" + "src/usbc_config.c") + +zephyr_library_sources( + "src/sku.c" + "src/switchcap.c") + +# Board specific implementation +zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_I2C + "src/i2c.c") diff --git a/zephyr/projects/trogdor/lazor/adc.dts b/zephyr/projects/trogdor/lazor/adc.dts new file mode 100644 index 0000000000..b834001587 --- /dev/null +++ b/zephyr/projects/trogdor/lazor/adc.dts @@ -0,0 +1,48 @@ +/* Copyright 2022 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +#include <zephyr/dt-bindings/adc/adc.h> + +/ { + named-adc-channels { + compatible = "named-adc-channels"; + + vbus { + enum-name = "ADC_VBUS"; + io-channels = <&adc0 1>; + /* Measure VBUS through a 1/10 voltage divider */ + mul = <10>; + }; + amon_bmon { + enum-name = "ADC_AMON_BMON"; + io-channels = <&adc0 2>; + /* + * Adapter current output or battery charging/ + * discharging current (uV) 18x amplification on + * charger side. + */ + mul = <1000>; + div = <18>; + }; + psys { + enum-name = "ADC_PSYS"; + io-channels = <&adc0 3>; + /* + * ISL9238 PSYS output is 1.44 uA/W over 5.6K resistor, + * to read 0.8V @ 99 W, i.e. 124000 uW/mV. + */ + mul = <124000>; + }; + }; + +}; + +&adc0 { + status = "okay"; + pinctrl-0 = <&adc0_chan1_gp44 + &adc0_chan2_gp43 + &adc0_chan3_gp42>; + pinctrl-names = "default"; +}; diff --git a/zephyr/projects/trogdor/lazor/battery.dts b/zephyr/projects/trogdor/lazor/battery.dts new file mode 100644 index 0000000000..2b17dd4761 --- /dev/null +++ b/zephyr/projects/trogdor/lazor/battery.dts @@ -0,0 +1,24 @@ +/* Copyright 2021 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/ { + batteries { + default_battery: ap16l5j { + compatible = "panasonic,ap16l5j", "battery-smart"; + }; + ap16l5j_009 { + compatible = "panasonic,ap16l5j-009", "battery-smart"; + }; + ap16l8j { + compatible = "lgc,ap16l8j", "battery-smart"; + }; + lgc_ap18c8k { + compatible = "lgc,ap18c8k", "battery-smart"; + }; + murata_ap18c4k { + compatible = "murata,ap18c4k", "battery-smart"; + }; + }; +}; diff --git a/zephyr/projects/trogdor/lazor/default_gpio_pinctrl.dts b/zephyr/projects/trogdor/lazor/default_gpio_pinctrl.dts new file mode 100644 index 0000000000..1819bdbc3e --- /dev/null +++ b/zephyr/projects/trogdor/lazor/default_gpio_pinctrl.dts @@ -0,0 +1,43 @@ +/* Copyright 2022 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* Adds the &alt1_no_lpc_espi setting over the NPCX7 default setting. */ +&{/def-io-conf-list} { + pinmux = <&alt0_gpio_no_spip + &alt0_gpio_no_fpip + &alt1_no_pwrgd + &alt1_no_lpc_espi + &alta_no_peci_en + &altd_npsl_in1_sl + &altd_npsl_in2_sl + &altd_psl_in3_sl + &altd_psl_in4_sl + &alt7_no_ksi0_sl + &alt7_no_ksi1_sl + &alt7_no_ksi2_sl + &alt7_no_ksi3_sl + &alt7_no_ksi4_sl + &alt7_no_ksi5_sl + &alt7_no_ksi6_sl + &alt7_no_ksi7_sl + &alt8_no_kso00_sl + &alt8_no_kso01_sl + &alt8_no_kso02_sl + &alt8_no_kso03_sl + &alt8_no_kso04_sl + &alt8_no_kso05_sl + &alt8_no_kso06_sl + &alt8_no_kso07_sl + &alt9_no_kso08_sl + &alt9_no_kso09_sl + &alt9_no_kso10_sl + &alt9_no_kso11_sl + &alt9_no_kso12_sl + &alt9_no_kso13_sl + &alt9_no_kso14_sl + &alt9_no_kso15_sl + &alta_no_kso16_sl + &alta_no_kso17_sl >; +}; diff --git a/zephyr/projects/trogdor/lazor/display.dts b/zephyr/projects/trogdor/lazor/display.dts new file mode 100644 index 0000000000..65d3a2d91b --- /dev/null +++ b/zephyr/projects/trogdor/lazor/display.dts @@ -0,0 +1,18 @@ +/* Copyright 2022 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/ { + displight { + compatible = "cros-ec,displight"; + pwms = <&pwm5 0 PWM_HZ(4800) PWM_POLARITY_NORMAL>; + generic-pwm-channel = <1>; + }; +}; + +&pwm5 { + status = "okay"; + pinctrl-0 = <&pwm5_gpb7>; + pinctrl-names = "default"; +}; diff --git a/zephyr/projects/trogdor/lazor/gpio.dts b/zephyr/projects/trogdor/lazor/gpio.dts new file mode 100644 index 0000000000..a047d7e2f2 --- /dev/null +++ b/zephyr/projects/trogdor/lazor/gpio.dts @@ -0,0 +1,320 @@ +/* Copyright 2021 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +#include <dt-bindings/wake_mask_event_defines.h> + +/ { + aliases { + gpio-wp = &gpio_ec_wp_odl; + gpio-kbd-kso2 = &gpio_ec_kso_02_inv; + }; + + named-gpios { + compatible = "named-gpios"; + + gpio_usb_c0_pd_int_odl: usb_c0_pd_int_odl { + gpios = <&gpioe 0 GPIO_INPUT>; + enum-name = "GPIO_USB_C0_PD_INT_ODL"; + }; + gpio_usb_c1_pd_int_odl: usb_c1_pd_int_odl { + gpios = <&gpiof 5 GPIO_INPUT>; + enum-name = "GPIO_USB_C1_PD_INT_ODL"; + }; + gpio_usb_c0_swctl_int_odl: usb_c0_swctl_int_odl { + gpios = <&gpio0 3 GPIO_INPUT>; + enum-name = "GPIO_USB_C0_SWCTL_INT_ODL"; + }; + gpio_usb_c1_swctl_int_odl: usb_c1_swctl_int_odl { + gpios = <&gpio4 0 GPIO_INPUT>; + enum-name = "GPIO_USB_C1_SWCTL_INT_ODL"; + }; + gpio_usb_c0_bc12_int_l: usb_c0_bc12_int_l { + gpios = <&gpio6 1 GPIO_INPUT_PULL_UP>; + }; + gpio_usb_c1_bc12_int_l: usb_c1_bc12_int_l { + gpios = <&gpio8 2 GPIO_INPUT_PULL_UP>; + }; + gpio_usb_a0_oc_odl: usb_a0_oc_odl { + gpios = <&gpiod 1 GPIO_INPUT_PULL_UP>; + }; + gpio_acok_od: acok_od { + gpios = <&gpio0 0 GPIO_INPUT>; + enum-name = "GPIO_AC_PRESENT"; + }; + gpio_ccd_mode_odl: ccd_mode_odl { + gpios = <&gpioe 3 GPIO_INPUT>; + enum-name = "GPIO_CCD_MODE_ODL"; + }; + gpio_ec_pwr_btn_odl: ec_pwr_btn_odl { + gpios = <&gpio0 1 GPIO_INPUT>; + enum-name = "GPIO_POWER_BUTTON_L"; + }; + gpio_ec_voldn_btn_odl: ec_voldn_btn_odl { + gpios = <&gpio7 0 GPIO_INPUT_PULL_UP>; + enum-name = "GPIO_VOLUME_DOWN_L"; + }; + gpio_ec_volup_btn_odl: ec_volup_btn_odl { + gpios = <&gpiof 2 GPIO_INPUT_PULL_UP>; + enum-name = "GPIO_VOLUME_UP_L"; + }; + gpio_ec_wp_odl: ec_wp_odl { + gpios = <&gpioa 1 (GPIO_INPUT | GPIO_ACTIVE_LOW)>; + }; + gpio_lid_open_ec: lid_open_ec { + gpios = <&gpiod 2 GPIO_INPUT>; + enum-name = "GPIO_LID_OPEN"; + }; + gpio_ap_rst_l: ap_rst_l { + gpios = <&gpioc 1 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; + enum-name = "GPIO_AP_RST_L"; + }; + gpio_ps_hold: ps_hold { + gpios = <&gpioa 4 GPIO_INPUT_PULL_DOWN>; + enum-name = "GPIO_PS_HOLD"; + }; + gpio_ap_suspend: ap_suspend { + gpios = <&gpio5 7 GPIO_INPUT>; + enum-name = "GPIO_AP_SUSPEND"; + }; + gpio_deprecated_ap_rst_req: deprecated_ap_rst_req { + gpios = <&gpioc 2 (GPIO_INPUT_PULL_DOWN | GPIO_VOLTAGE_1P8)>; + enum-name = "GPIO_DEPRECATED_AP_RST_REQ"; + }; + gpio_power_good: power_good { + gpios = <&gpio5 4 GPIO_INPUT_PULL_DOWN>; + enum-name = "GPIO_POWER_GOOD"; + }; + gpio_warm_reset_l: warm_reset_l { + gpios = <&gpiof 4 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; + enum-name = "GPIO_WARM_RESET_L"; + }; + ap_ec_spi_cs_l { + gpios = <&gpio5 3 GPIO_INPUT_PULL_DOWN>; + }; + gpio_tablet_mode_l: tablet_mode_l { + gpios = <&gpioc 6 GPIO_INPUT>; + enum-name = "GPIO_TABLET_MODE_L"; + }; + gpio_accel_gyro_int_l: accel_gyro_int_l { + gpios = <&gpioa 0 GPIO_INPUT>; + }; + gpio_da9313_gpio0: da9313_gpio0 { + gpios = <&gpioe 2 GPIO_INPUT>; + enum-name = "GPIO_DA9313_GPIO0"; + }; + /* + * Active low input + */ + gpio_switchcap_pg_int_l: switchcap_pg_int_l { + gpios = <&gpioe 2 (GPIO_ACTIVE_LOW | GPIO_INPUT)>; + }; + gpio_ec_rst_odl: ec_rst_odl { + gpios = <&gpio0 2 GPIO_INPUT>; + }; + ec_entering_rw { + gpios = <&gpioe 1 GPIO_OUTPUT_LOW>; + enum-name = "GPIO_ENTERING_RW"; + }; + ec_batt_pres_odl { + gpios = <&gpioe 5 GPIO_INPUT>; + enum-name = "GPIO_BATT_PRES_ODL"; + }; + pm845_resin_l { + gpios = <&gpio3 2 GPIO_ODR_HIGH>; + enum-name = "GPIO_PMIC_RESIN_L"; + }; + pmic_kpd_pwr_odl { + gpios = <&gpiod 6 GPIO_ODR_HIGH>; + enum-name = "GPIO_PMIC_KPD_PWR_ODL"; + }; + ec_int_l { + gpios = <&gpioa 2 GPIO_ODR_HIGH>; + enum-name = "GPIO_EC_INT_L"; + }; + qsip_on { + gpios = <&gpio5 0 GPIO_OUTPUT_LOW>; + }; + gpio_hibernate_l: hibernate_l { + gpios = <&gpio5 2 GPIO_OUTPUT_HIGH>; + }; + gpio_switchcap_on: switchcap_on { + gpios = <&gpiod 5 GPIO_OUTPUT_LOW>; + enum-name = "GPIO_SWITCHCAP_ON"; + }; + gpio_vbob_en: vbob_en { + gpios = <&gpiod 3 GPIO_OUTPUT_LOW>; + enum-name = "GPIO_VBOB_EN"; + }; + gpio_en_pp3300_a: en_pp3300_a { + gpios = <&gpioa 6 GPIO_OUTPUT_LOW>; + enum-name = "GPIO_EN_PP3300_A"; + }; + gpio_en_pp5000_a: en_pp5000_a { + gpios = <&gpio6 7 GPIO_OUTPUT_LOW>; + enum-name = "GPIO_EN_PP5000"; + }; + ec_bl_disable_l { + gpios = <&gpiob 6 GPIO_OUTPUT_LOW>; + enum-name = "GPIO_ENABLE_BACKLIGHT"; + }; + gpio_lid_accel_int_l: lid_accel_int_l { + gpios = <&gpio5 6 GPIO_INPUT>; + }; + trackpad_int_gate { + gpios = <&gpio7 4 GPIO_OUTPUT_LOW>; + }; + gpio_usb_c0_pd_rst_l: usb_c0_pd_rst_l { + gpios = <&gpiof 1 GPIO_ODR_HIGH>; + }; + gpio_usb_c1_pd_rst_l: usb_c1_pd_rst_l { + gpios = <&gpioe 4 GPIO_ODR_HIGH>; + }; + gpio_dp_mux_oe_l: dp_mux_oe_l { + gpios = <&gpio9 6 GPIO_ODR_HIGH>; + }; + gpio_dp_mux_sel: dp_mux_sel { + gpios = <&gpio4 5 GPIO_OUTPUT_LOW>; + }; + gpio_dp_hot_plug_det: dp_hot_plug_det { + gpios = <&gpio9 5 GPIO_OUTPUT_LOW>; + }; + gpio_en_usb_a_5v: en_usb_a_5v { + gpios = <&gpio8 6 GPIO_OUTPUT_LOW>; + enum-name = "GPIO_EN_USB_A_5V"; + }; + usb_a_cdp_ilim_en { + gpios = <&gpio7 5 GPIO_OUTPUT_HIGH>; + }; + gpio_ec_chg_led_y_c1: ec_chg_led_y_c1 { + #led-pin-cells = <1>; + gpios = <&gpioc 3 GPIO_OUTPUT_LOW>; + }; + gpio_ec_chg_led_b_c1: ec_chg_led_b_c1 { + #led-pin-cells = <1>; + gpios = <&gpioc 4 GPIO_OUTPUT_LOW>; + }; + gpio_brd_id0: brd_id0 { + gpios = <&gpioc 7 GPIO_INPUT>; + enum-name = "GPIO_BOARD_VERSION1"; + }; + gpio_brd_id1: brd_id1 { + gpios = <&gpio9 3 GPIO_INPUT>; + enum-name = "GPIO_BOARD_VERSION2"; + }; + gpio_brd_id2: brd_id2 { + gpios = <&gpio6 3 GPIO_INPUT>; + enum-name = "GPIO_BOARD_VERSION3"; + }; + gpio_sku_id0: sku_id0 { + gpios = <&gpiof 0 GPIO_INPUT>; + }; + gpio_sku_id1: sku_id1 { + gpios = <&gpio4 1 GPIO_INPUT>; + }; + gpio_sku_id2: sku_id2 { + gpios = <&gpiod 4 GPIO_INPUT>; + }; + arm_x86 { + gpios = <&gpio6 6 GPIO_OUTPUT_LOW>; + }; + ec-i2c-sensor-scl { + gpios = <&gpiob 3 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; + }; + ec-i2c-sensor-sda { + gpios = <&gpiob 2 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; + }; + gpio_ec_kso_02_inv: ec_kso_02_inv { + gpios = <&gpio1 7 (GPIO_OUTPUT_LOW | GPIO_ACTIVE_LOW)>; + }; + }; + + usba-port-enable-list { + compatible = "cros-ec,usba-port-enable-pins"; + enable-pins = <&gpio_en_usb_a_5v>; + }; + + hibernate-wake-pins { + compatible = "cros-ec,hibernate-wake-pins"; + wakeup-irqs = < + &int_ac_present + &int_power_button + &int_lid_open + &int_ec_rst + >; + }; + + ec-mkbp-host-event-wakeup-mask { + compatible = "ec-wake-mask-event"; + wakeup-mask = <( + HOST_EVENT_LID_OPEN | + HOST_EVENT_POWER_BUTTON | + HOST_EVENT_AC_CONNECTED | + HOST_EVENT_AC_DISCONNECTED | + HOST_EVENT_HANG_DETECT | + HOST_EVENT_RTC | + HOST_EVENT_MODE_CHANGE | + HOST_EVENT_DEVICE)>; + }; + + ec-mkbp-event-wakeup-mask { + compatible = "ec-wake-mask-event"; + wakeup-mask = <(MKBP_EVENT_KEY_MATRIX | + MKBP_EVENT_HOST_EVENT | + MKBP_EVENT_SENSOR_FIFO)>; + }; + + sku { + compatible = "cros-ec,gpio-id"; + + bits = < + &gpio_sku_id0 + &gpio_sku_id1 + &gpio_sku_id2 + >; + + system = "binary"; + }; + + board { + compatible = "cros-ec,gpio-id"; + + bits = < + &gpio_brd_id0 + &gpio_brd_id1 + &gpio_brd_id2 + >; + + system = "binary_first_base3"; + }; + + unused-pins { + compatible = "unused-gpios"; + unused-gpios = + <&gpio5 1 0>, + <&gpiod 0 0>, + <&gpiof 3 0>, + <&gpio0 4 0>, + <&gpioc 0 0>, + <&gpioa 7 0>, + <&gpio8 3 0>, + <&gpio8 1 0>, + <&gpio3 7 0>, + <&gpio7 6 0>, + <&gpio3 4 0>, + <&gpioc 5 0>, + <&gpioa 3 0>, + <&gpio7 3 0>, + <&gpiod 7 0>, + <&gpioa 5 0>, + <&gpiob 0 0>, + <&gpio9 4 0>, + <&gpiob 1 0>, + <&gpio6 2 0>, + <&gpio3 5 0>, + <&gpio9 7 0>, + <&gpio6 0 0>, + <&gpio7 2 0>; + }; +}; diff --git a/zephyr/projects/trogdor/lazor/gpio_led.dts b/zephyr/projects/trogdor/lazor/gpio_led.dts new file mode 100644 index 0000000000..c8c026506b --- /dev/null +++ b/zephyr/projects/trogdor/lazor/gpio_led.dts @@ -0,0 +1,33 @@ +/* Copyright 2022 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/ { + gpio-led-pins { + compatible = "cros-ec,gpio-led-pins"; + + color_off: color-off { + led-color = "LED_OFF"; + led-id = "EC_LED_ID_BATTERY_LED"; + led-pins = <&gpio_ec_chg_led_y_c1 0>, + <&gpio_ec_chg_led_b_c1 0>; + }; + + color_amber: color-amber { + led-color = "LED_AMBER"; + led-id = "EC_LED_ID_BATTERY_LED"; + br-color = "EC_LED_COLOR_AMBER"; + led-pins = <&gpio_ec_chg_led_y_c1 1>, + <&gpio_ec_chg_led_b_c1 0>; + }; + + color_blue: color-blue { + led-color = "LED_BLUE"; + led-id = "EC_LED_ID_BATTERY_LED"; + br-color = "EC_LED_COLOR_BLUE"; + led-pins = <&gpio_ec_chg_led_y_c1 0>, + <&gpio_ec_chg_led_b_c1 1>; + }; + }; +}; diff --git a/zephyr/projects/trogdor/lazor/host_interface_npcx.dts b/zephyr/projects/trogdor/lazor/host_interface_npcx.dts new file mode 100644 index 0000000000..14efa3c6b2 --- /dev/null +++ b/zephyr/projects/trogdor/lazor/host_interface_npcx.dts @@ -0,0 +1,12 @@ +/* Copyright 2022 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* host interface */ +&shi { + status = "okay"; + pinctrl-0 = <&shi_gp46_47_53_55>; + pinctrl-1 = <&shi_gpio_gp46_47_53_55>; + pinctrl-names = "default", "sleep"; +}; diff --git a/zephyr/projects/trogdor/lazor/i2c.dts b/zephyr/projects/trogdor/lazor/i2c.dts new file mode 100644 index 0000000000..e19ad224a9 --- /dev/null +++ b/zephyr/projects/trogdor/lazor/i2c.dts @@ -0,0 +1,145 @@ +/* Copyright 2022 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/ { + named-i2c-ports { + compatible = "named-i2c-ports"; + + i2c_power: power { + i2c-port = <&i2c0_0>; + remote-port = <0>; + enum-names = "I2C_PORT_POWER", + "I2C_PORT_BATTERY", + "I2C_PORT_VIRTUAL_BATTERY", + "I2C_PORT_CHARGER"; + }; + i2c_tcpc0: tcpc0 { + i2c-port = <&i2c1_0>; + enum-names = "I2C_PORT_TCPC0"; + }; + i2c_tcpc1: tcpc1 { + i2c-port = <&i2c2_0>; + enum-names = "I2C_PORT_TCPC1"; + }; + i2c_eeprom: eeprom { + i2c-port = <&i2c5_0>; + enum-names = "I2C_PORT_EEPROM"; + }; + i2c_sensor: sensor { + i2c-port = <&i2c7_0>; + enum-names = "I2C_PORT_SENSOR", + "I2C_PORT_ACCEL"; + }; + }; + +}; + +&i2c0_0 { + status = "okay"; + clock-frequency = <I2C_BITRATE_STANDARD>; + pinctrl-0 = <&i2c0_0_sda_scl_gpb4_b5>; + pinctrl-names = "default"; + + bc12_port0: pi3usb9201@5f { + compatible = "pericom,pi3usb9201"; + status = "okay"; + reg = <0x5f>; + irq = <&int_usb_c0_bc12>; + }; + + charger: isl923x@9 { + compatible = "intersil,isl923x"; + status = "okay"; + reg = <0x9>; + }; +}; + +&i2c_ctrl0 { + status = "okay"; +}; + +&i2c1_0 { + status = "okay"; + clock-frequency = <I2C_BITRATE_FAST_PLUS>; + pinctrl-0 = <&i2c1_0_sda_scl_gp87_90>; + pinctrl-names = "default"; + + ppc_port0: sn5s330@40 { + compatible = "ti,sn5s330"; + status = "okay"; + reg = <0x40>; + }; + + tcpc_port0: ps8xxx@b { + compatible = "parade,ps8xxx"; + status = "okay"; + reg = <0xb>; + }; +}; + +&i2c_ctrl1 { + status = "okay"; +}; + +&i2c2_0 { + status = "okay"; + clock-frequency = <I2C_BITRATE_FAST_PLUS>; + pinctrl-0 = <&i2c2_0_sda_scl_gp91_92>; + pinctrl-names = "default"; + + ppc_port1: sn5s330@40{ + compatible = "ti,sn5s330"; + status = "okay"; + reg = <0x40>; + }; + + tcpc_port1: ps8xxx@b { + compatible = "parade,ps8xxx"; + status = "okay"; + reg = <0xb>; + }; +}; + +&i2c_ctrl2 { + status = "okay"; +}; + +&i2c3_0 { + /* Not used as no WLC connected */ + clock-frequency = <I2C_BITRATE_FAST>; +}; + +&i2c_ctrl3 { + status = "okay"; +}; + +&i2c5_0 { + status = "okay"; + clock-frequency = <I2C_BITRATE_FAST>; + pinctrl-0 = <&i2c5_0_sda_scl_gp33_36>; + pinctrl-names = "default"; + + bc12_port1: pi3usb9201@5f { + compatible = "pericom,pi3usb9201"; + status = "okay"; + reg = <0x5f>; + irq = <&int_usb_c1_bc12>; + }; +}; + +&i2c_ctrl5 { + status = "okay"; +}; + +&i2c7_0 { + status = "okay"; + clock-frequency = <I2C_BITRATE_FAST>; + pinctrl-0 = <&i2c7_0_sda_scl_gpb2_b3>; + pinctrl-names = "default"; +}; + +&i2c_ctrl7 { + status = "okay"; +}; diff --git a/zephyr/projects/trogdor/lazor/include/sku.h b/zephyr/projects/trogdor/lazor/include/sku.h new file mode 100644 index 0000000000..76825bbba1 --- /dev/null +++ b/zephyr/projects/trogdor/lazor/include/sku.h @@ -0,0 +1,17 @@ +/* Copyright 2022 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* Lazor board-specific SKU configuration */ + +#ifndef __ZEPHYR_LAZOR_SKU_H +#define __ZEPHYR_LAZOR_SKU_H + +int board_get_version(void); +int board_is_clamshell(void); +int board_has_da9313(void); +int board_has_ln9310(void); +int board_has_buck_ic(void); + +#endif /* __ZEPHYR_LAZOR_SKU_H */ diff --git a/zephyr/projects/trogdor/lazor/interrupts.dts b/zephyr/projects/trogdor/lazor/interrupts.dts new file mode 100644 index 0000000000..5c2ed35e90 --- /dev/null +++ b/zephyr/projects/trogdor/lazor/interrupts.dts @@ -0,0 +1,140 @@ +/* Copyright 2022 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/ { + aliases { + int-wp = &int_wp; + }; + + gpio-interrupts { + compatible = "cros-ec,gpio-interrupts"; + + int_ac_present: ac_present { + irq-pin = <&gpio_acok_od>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "extpower_interrupt"; + }; + int_lid_open: lid_open { + irq-pin = <&gpio_lid_open_ec>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "lid_interrupt"; + }; + int_wp: wp { + irq-pin = <&gpio_ec_wp_odl>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "switch_interrupt"; + }; + int_power_button: power_button { + irq-pin = <&gpio_ec_pwr_btn_odl>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "power_button_interrupt"; + }; + int_volume_up: volume_up { + irq-pin = <&gpio_ec_volup_btn_odl>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "button_interrupt"; + }; + int_volume_down: volume_down { + irq-pin = <&gpio_ec_voldn_btn_odl>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "button_interrupt"; + }; + /* + * Note this is an active low input, so + * the direction is from logical low to + * logical high. + */ + int_switchcap_pg: switchcap_pg { + irq-pin = <&gpio_switchcap_pg_int_l>; + flags = <GPIO_INT_EDGE_RISING>; + handler = "ln9310_interrupt"; + }; + int_ap_rst: ap_rst { + irq-pin = <&gpio_ap_rst_l>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "chipset_ap_rst_interrupt"; + }; + int_ap_suspend: ap_suspend { + irq-pin = <&gpio_ap_suspend>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "power_signal_interrupt"; + }; + int_deprecated_ap_rst_req: deprecated_ap_rst_req { + irq-pin = <&gpio_deprecated_ap_rst_req>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "power_signal_interrupt"; + }; + int_power_good: power_good { + irq-pin = <&gpio_power_good>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "chipset_power_good_interrupt"; + }; + int_ps_hold: ps_hold { + irq-pin = <&gpio_ps_hold>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "power_signal_interrupt"; + }; + int_warm_reset: warm_reset { + irq-pin = <&gpio_warm_reset_l>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "chipset_warm_reset_interrupt"; + }; + int_usb_c0_tcpc: usb_c0_tcpc { + irq-pin = <&gpio_usb_c0_pd_int_odl>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "tcpc_alert_event"; + }; + int_usb_c1_tcpc: usb_c1_tcpc { + irq-pin = <&gpio_usb_c1_pd_int_odl>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "tcpc_alert_event"; + }; + int_usb_c0_swctl: usb_c0_swctl { + irq-pin = <&gpio_usb_c0_swctl_int_odl>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "ppc_interrupt"; + }; + int_usb_c1_swctl: usb_c1_swctl { + irq-pin = <&gpio_usb_c1_swctl_int_odl>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "ppc_interrupt"; + }; + int_usb_c0_bc12: usb_c0_bc12 { + irq-pin = <&gpio_usb_c0_bc12_int_l>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "usb0_evt"; + }; + int_usb_c1_bc12: usb_c1_bc12 { + irq-pin = <&gpio_usb_c1_bc12_int_l>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "usb1_evt"; + }; + int_usb_a0_oc: usb_a0_oc { + irq-pin = <&gpio_usb_a0_oc_odl>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "usba_oc_interrupt"; + }; + int_ccd_mode: ccd_mode { + irq-pin = <&gpio_ccd_mode_odl>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "board_connect_c0_sbu"; + }; + int_accel: accel { + irq-pin = <&gpio_accel_gyro_int_l>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "bmi160_interrupt"; + }; + int_tablet_mode: tablet_mode { + irq-pin = <&gpio_tablet_mode_l>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "gmr_tablet_switch_isr"; + }; + int_ec_rst: ec_rst { + irq-pin = <&gpio_ec_rst_odl>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "wake_isr"; + }; + }; +}; diff --git a/zephyr/projects/trogdor/lazor/keyboard.dts b/zephyr/projects/trogdor/lazor/keyboard.dts new file mode 100644 index 0000000000..b8689b883c --- /dev/null +++ b/zephyr/projects/trogdor/lazor/keyboard.dts @@ -0,0 +1,38 @@ +/* Copyright 2021 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/ { + cros-keyscan { + compatible = "cros-keyscan"; + + actual-key-mask = < + 0x14 /* C0 */ + 0xff /* C1 */ + 0xff /* C2 */ + 0xff /* C3 */ + 0xff /* C4 */ + 0xf5 /* C5 */ + 0xff /* C6 */ + 0xa4 /* C7 */ + 0xff /* C8 */ + 0xfe /* C9 */ + 0x55 /* C10 */ + 0xfa /* C11 */ + 0xca /* C12 */ + >; + }; + + kblight { + compatible = "cros-ec,kblight-pwm"; + pwms = <&pwm3 0 PWM_KHZ(10) PWM_POLARITY_NORMAL>; + generic-pwm-channel = <0>; + }; +}; + +&pwm3 { + status = "okay"; + pinctrl-0 = <&pwm3_gp80>; + pinctrl-names = "default"; +}; diff --git a/zephyr/projects/trogdor/lazor/led.dts b/zephyr/projects/trogdor/lazor/led.dts new file mode 100644 index 0000000000..4527afd34c --- /dev/null +++ b/zephyr/projects/trogdor/lazor/led.dts @@ -0,0 +1,90 @@ +/ { + led-colors { + compatible = "cros-ec,led-policy"; + + power-state-charge { + charge-state = "PWR_STATE_CHARGE"; + + color-0 { + led-color = <&color_amber>; + }; + }; + + power-state-discharge-s0 { + charge-state = "PWR_STATE_DISCHARGE"; + chipset-state = "POWER_S0"; + + color-0 { + led-color = <&color_blue>; + }; + }; + + power-state-discharge-s3 { + charge-state = "PWR_STATE_DISCHARGE"; + chipset-state = "POWER_S3"; + + /* Amber 1 sec, off 3 sec */ + color-0 { + led-color = <&color_amber>; + period-ms = <1000>; + }; + color-1 { + led-color = <&color_off>; + period-ms = <3000>; + }; + }; + + power-state-discharge-s5 { + charge-state = "PWR_STATE_DISCHARGE"; + chipset-state = "POWER_S5"; + + color-0 { + led-color = <&color_off>; + }; + }; + + power-state-error { + charge-state = "PWR_STATE_ERROR"; + + /* Amber 1 sec, off 1 sec */ + color-0 { + led-color = <&color_amber>; + period-ms = <1000>; + }; + color-1 { + led-color = <&color_off>; + period-ms = <1000>; + }; + }; + + power-state-near-full { + charge-state = "PWR_STATE_CHARGE_NEAR_FULL"; + + color-0 { + led-color = <&color_blue>; + }; + }; + + power-state-forced-idle { + charge-state = "PWR_STATE_FORCED_IDLE"; + + /* Blue 2 sec, Amber 2 sec */ + color-0 { + led-color = <&color_blue>; + period-ms = <2000>; + }; + color-1 { + led-color = <&color_amber>; + period-ms = <2000>; + }; + }; + + power-state-idle { + charge-state = "PWR_STATE_IDLE"; + + color-0 { + led-color = <&color_blue>; + }; + }; + }; +}; diff --git a/zephyr/projects/trogdor/lazor/motionsense.dts b/zephyr/projects/trogdor/lazor/motionsense.dts new file mode 100644 index 0000000000..75fe31b997 --- /dev/null +++ b/zephyr/projects/trogdor/lazor/motionsense.dts @@ -0,0 +1,181 @@ +/* Copyright 2020 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +#include <dt-bindings/motionsense/utils.h> + + +/ { + aliases { + /* + * motion sense's <>_INT_EVENT is handled + * by alias. Using the alias, each driver creates + * its own <>_INT_EVENT. + */ + bmi160-int = &base_accel; + }; + + /* + * Declare mutexes used by sensor drivers. + * A mutex node is used to create an instance of mutex_t. + * A mutex node is referenced by a sensor node if the + * corresponding sensor driver needs to use the + * instance of the mutex. + */ + motionsense-mutex { + compatible = "cros-ec,motionsense-mutex"; + lid_mutex: lid-mutex { + }; + + mutex_bmi160: bmi160-mutex { + }; + }; + + /* Rotation matrix used by drivers. */ + motionsense-rotation-ref { + compatible = "cros-ec,motionsense-rotation-ref"; + lid_rot_ref: lid-rotation-ref { + mat33 = <(-1) 0 0 + 0 (-1) 0 + 0 0 1>; + }; + + base_rot_ref: base-rotation-ref { + mat33 = <1 0 0 + 0 (-1) 0 + 0 0 (-1)>; + }; + }; + + /* + * Driver specific data. A driver-specific data can be shared with + * different motion sensors while they are using the same driver. + * + * If a node's compatible starts with "cros-ec,accelgyro-", it is for + * a common structure defined in accelgyro.h. + * e.g) compatible = "cros-ec,accelgyro-als-drv-data" is for + * "struct als_drv_data_t" in accelgyro.h + */ + motionsense-sensor-data { + bma255_data: bma255-drv-data { + compatible = "cros-ec,drvdata-bma255"; + status = "okay"; + }; + + bmi160_data: bmi160-drv-data { + compatible = "cros-ec,drvdata-bmi160"; + status = "okay"; + }; + + kx022_data: kx022-drv-data { + compatible = "cros-ec,drvdata-kionix"; + status = "okay"; + }; + }; + + /* + * List of motion sensors that creates motion_sensors array. + * The nodelabel "lid_accel" and "base_accel" are used to indicate + * motion sensor IDs for lid angle calculation. + */ + motionsense-sensor { + lid_accel: lid-accel { + compatible = "cros-ec,bma255"; + status = "okay"; + + active-mask = "SENSOR_ACTIVE_S0_S3_S5"; + location = "MOTIONSENSE_LOC_LID"; + mutex = <&lid_mutex>; + port = <&i2c_sensor>; + rot-standard-ref = <&lid_rot_ref>; + default-range = <2>; + drv-data = <&bma255_data>; + i2c-spi-addr-flags = "BMA2x2_I2C_ADDR1_FLAGS"; + configs { + compatible = + "cros-ec,motionsense-sensor-config"; + ec-s0 { + odr = <(10000 | ROUND_UP_FLAG)>; + }; + ec-s3 { + odr = <(10000 | ROUND_UP_FLAG)>; + }; + }; + }; + + base_accel: base-accel { + compatible = "cros-ec,bmi160-accel"; + status = "okay"; + + active-mask = "SENSOR_ACTIVE_S0_S3_S5"; + location = "MOTIONSENSE_LOC_BASE"; + mutex = <&mutex_bmi160>; + port = <&i2c_sensor>; + rot-standard-ref = <&base_rot_ref>; + drv-data = <&bmi160_data>; + configs { + compatible = + "cros-ec,motionsense-sensor-config"; + ec-s0 { + odr = <(10000 | ROUND_UP_FLAG)>; + }; + ec-s3 { + odr = <(10000 | ROUND_UP_FLAG)>; + }; + }; + }; + + base-gyro { + compatible = "cros-ec,bmi160-gyro"; + status = "okay"; + + active-mask = "SENSOR_ACTIVE_S0_S3_S5"; + location = "MOTIONSENSE_LOC_BASE"; + mutex = <&mutex_bmi160>; + port = <&i2c_sensor>; + rot-standard-ref = <&base_rot_ref>; + drv-data = <&bmi160_data>; + }; + }; + + /* + * List of alternative motion sensors that creates + * motion_sensors_alt array. + */ + motionsense-sensor-alt { + alt_lid_accel { + compatible = "cros-ec,kx022"; + status = "okay"; + active-mask = "SENSOR_ACTIVE_S0_S3_S5"; + location = "MOTIONSENSE_LOC_LID"; + mutex = <&lid_mutex>; + port = <&i2c_sensor>; + rot-standard-ref = <&lid_rot_ref>; + drv-data = <&kx022_data>; + alternate-for = <&lid_accel>; + configs { + compatible = + "cros-ec,motionsense-sensor-config"; + ec-s0 { + odr = <(10000 | ROUND_UP_FLAG)>; + }; + ec-s3 { + odr = <(10000 | ROUND_UP_FLAG)>; + }; + }; + }; + }; + + motionsense-sensor-info { + compatible = "cros-ec,motionsense-sensor-info"; + + /* + * list of GPIO interrupts that have to + * be enabled at initial stage + */ + sensor-irqs = <&int_accel>; + /* list of sensors in force mode */ + accel-force-mode-sensors = <&lid_accel>; + }; +}; diff --git a/zephyr/projects/trogdor/lazor/prj.conf b/zephyr/projects/trogdor/lazor/prj.conf new file mode 100644 index 0000000000..358de69d68 --- /dev/null +++ b/zephyr/projects/trogdor/lazor/prj.conf @@ -0,0 +1,164 @@ +# Copyright 2021 The ChromiumOS Authors +# Use of this source code is governed by a BSD-style license that can be +# found in the LICENSE file. + +CONFIG_CROS_EC=y +# +# Lazor actually has a NPCX7M6FC, but +# the NPCX7M7FC is actually the same die, without the +# extra RAM being tested. The code size really could +# do with the extra space, so we pretend the EC is the +# part with the larger RAM. YMMV. +# +CONFIG_SOC_NPCX7M7FC=y +CONFIG_SOC_SERIES_NPCX7=y +CONFIG_SHIMMED_TASKS=y +CONFIG_PLATFORM_EC=y +CONFIG_PLATFORM_EC_BRINGUP=y +CONFIG_PLATFORM_EC_EXTPOWER_GPIO=y +CONFIG_PLATFORM_EC_SWITCH=y +CONFIG_PLATFORM_EC_LID_SWITCH=y +CONFIG_PLATFORM_EC_BACKLIGHT_LID=y +CONFIG_PLATFORM_EC_POWER_BUTTON=y + +# I2C +CONFIG_I2C=y + +# LED +CONFIG_PLATFORM_EC_LED_DT=y + +# PWM +CONFIG_PWM=y +CONFIG_PWM_SHELL=n + +# Application Processor is Qualcomm SC7180 +CONFIG_AP_ARM_QUALCOMM_SC7180=y + +# Board version is selected over GPIO board ID pins. +CONFIG_PLATFORM_EC_BOARD_VERSION_GPIO=y + +# LN9310 Switchcap +CONFIG_PLATFORM_EC_SWITCHCAP_LN9310=y + +# Power Sequencing +CONFIG_PLATFORM_EC_POWERSEQ=y +CONFIG_PLATFORM_EC_POWERSEQ_HOST_SLEEP=y +CONFIG_PLATFORM_EC_POWER_SLEEP_FAILURE_DETECTION=y +CONFIG_PLATFORM_EC_CHIPSET_RESET_HOOK=y +CONFIG_PLATFORM_EC_CHIPSET_RESUME_INIT_HOOK=y + +# Trogdor family does not use EFS2 +CONFIG_PLATFORM_EC_VBOOT_EFS2=n + +# MKBP event +CONFIG_PLATFORM_EC_MKBP_EVENT=y +CONFIG_PLATFORM_EC_MKBP_USE_GPIO=y + +# Keyboard +CONFIG_PLATFORM_EC_KEYBOARD=y +CONFIG_PLATFORM_EC_KEYBOARD_PROTOCOL_MKBP=y +CONFIG_PLATFORM_EC_MKBP_INPUT_DEVICES=y +CONFIG_PLATFORM_EC_KEYBOARD_COL2_INVERTED=y +CONFIG_PLATFORM_EC_VOLUME_BUTTONS=y +CONFIG_PLATFORM_EC_CMD_BUTTON=y +CONFIG_CROS_KB_RAW_NPCX=y + +# ADC +CONFIG_ADC=y +CONFIG_ADC_SHELL=n + +# Battery +CONFIG_PLATFORM_EC_BATTERY=y +CONFIG_PLATFORM_EC_BATTERY_SMART=y +CONFIG_PLATFORM_EC_I2C_VIRTUAL_BATTERY=y +CONFIG_PLATFORM_EC_I2C_PASSTHRU_RESTRICTED=y +CONFIG_PLATFORM_EC_BATTERY_FUEL_GAUGE=y +CONFIG_PLATFORM_EC_BATTERY_CUT_OFF=y +CONFIG_PLATFORM_EC_BATTERY_PRESENT_GPIO=y +CONFIG_PLATFORM_EC_CHARGER_ISL9238=y +CONFIG_PLATFORM_EC_CHARGE_RAMP_HW=y +CONFIG_PLATFORM_EC_USE_BATTERY_DEVICE_CHEMISTRY=y +CONFIG_PLATFORM_EC_BATTERY_DEVICE_CHEMISTRY="LION" +CONFIG_PLATFORM_EC_BATTERY_REVIVE_DISCONNECT=y +CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC=y +CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC_CHARGER=y +CONFIG_PLATFORM_EC_CHARGER_MIN_BAT_PCT_FOR_POWER_ON=2 +CONFIG_PLATFORM_EC_CHARGER_MIN_POWER_MW_FOR_POWER_ON=10000 +CONFIG_PLATFORM_EC_CHARGER_PROFILE_OVERRIDE=y +CONFIG_PLATFORM_EC_CHARGER_PSYS=y +CONFIG_PLATFORM_EC_CHARGER_PSYS_READ=y +CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR=10 +CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR_AC=20 +CONFIG_PLATFORM_EC_CONSOLE_CMD_CHARGER_ADC_AMON_BMON=y + +# USB-A +CONFIG_PLATFORM_EC_USBA=y + +# USB-C +CONFIG_PLATFORM_EC_BC12_DETECT_PI3USB9201=y +CONFIG_PLATFORM_EC_USB_PD_USB32_DRD=n +CONFIG_PLATFORM_EC_USBC_PPC_SN5S330=y +CONFIG_PLATFORM_EC_USBC_RETIMER_FW_UPDATE=n +CONFIG_PLATFORM_EC_USBC_SS_MUX_DFP_ONLY=y +CONFIG_PLATFORM_EC_USB_DRP_ACC_TRYSRC=y +CONFIG_PLATFORM_EC_USB_PD_5V_EN_CUSTOM=y +CONFIG_PLATFORM_EC_USB_PD_VBUS_DETECT_TCPC=y +CONFIG_PLATFORM_EC_USB_PD_DISCHARGE_PPC=y +CONFIG_PLATFORM_EC_USB_PD_REV30=n +CONFIG_PLATFORM_EC_USB_PD_TBT_COMPAT_MODE=n +CONFIG_PLATFORM_EC_USB_PD_USB4=n +CONFIG_PLATFORM_EC_USB_PD_TCPC_LOW_POWER=y +CONFIG_PLATFORM_EC_USB_PD_TCPM_MULTI_PS8XXX=y +CONFIG_PLATFORM_EC_USB_PD_TCPM_PS8751=y +CONFIG_PLATFORM_EC_USB_PD_TCPM_PS8805=y +CONFIG_PLATFORM_EC_USB_PD_TCPC_RUNTIME_CONFIG=n +CONFIG_PLATFORM_EC_USB_MUX_RUNTIME_CONFIG=n +CONFIG_PLATFORM_EC_USB_PD_LOGGING=y + +# USB ID +# This is allocated specifically for Trogdor +# http://google3/hardware/standards/usb/ +# TODO(b/183608112): Move to device tree +CONFIG_PLATFORM_EC_USB_PID=0x5043 + +# RTC +CONFIG_PLATFORM_EC_RTC=y +CONFIG_CROS_RTC_NPCX=y +CONFIG_PLATFORM_EC_HOSTCMD_RTC=y +CONFIG_PLATFORM_EC_CONSOLE_CMD_RTC=y + +# EC software sync +CONFIG_PLATFORM_EC_VBOOT_HASH=y + +# Sensors +CONFIG_PLATFORM_EC_MOTIONSENSE=y +CONFIG_PLATFORM_EC_ACCEL_FIFO=y +CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCELS=y +CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCEL_INFO=y +CONFIG_PLATFORM_EC_GMR_TABLET_MODE=y +CONFIG_PLATFORM_EC_LID_ANGLE=y +CONFIG_PLATFORM_EC_LID_ANGLE_UPDATE=y +CONFIG_PLATFORM_EC_SENSOR_TIGHT_TIMESTAMPS=y +CONFIG_PLATFORM_EC_TABLET_MODE=y +CONFIG_PLATFORM_EC_TABLET_MODE_SWITCH=y + +# Sensor Drivers +CONFIG_PLATFORM_EC_ACCEL_BMA255=y +CONFIG_PLATFORM_EC_ACCELGYRO_BMI160=y +CONFIG_PLATFORM_EC_ACCELGYRO_BMI_COMM_I2C=y + +# Console history +CONFIG_SHELL_HISTORY=y +CONFIG_SHELL_CMDS=y +CONFIG_SHELL_HELP=n +CONFIG_SHELL_MINIMAL=y + +# Taskinfo +CONFIG_THREAD_MONITOR=y +CONFIG_KERNEL_SHELL=y + +CONFIG_SYSCON=y + +# Features should be enabled. But the code RAM is not enough, disable them. +#CONFIG_PLATFORM_EC_ACCEL_SPOOF_MODE=y +#CONFIG_PLATFORM_EC_EMULATED_SYSRQ=y diff --git a/zephyr/projects/trogdor/lazor/pwm_led.dts b/zephyr/projects/trogdor/lazor/pwm_led.dts new file mode 100644 index 0000000000..0582966d6a --- /dev/null +++ b/zephyr/projects/trogdor/lazor/pwm_led.dts @@ -0,0 +1,59 @@ +/* Copyright 2022 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/ { + pwm_pins { + compatible = "cros-ec,pwm-pin-config"; + + pwm_y: pwm_y { + #led-pin-cells = <1>; + pwms = <&pwm0 0 PWM_HZ(324) PWM_POLARITY_NORMAL>; + }; + + pwm_b: pwm_b { + #led-pin-cells = <1>; + pwms = <&pwm2 0 PWM_HZ(324) PWM_POLARITY_NORMAL>; + }; + }; + + pwm-led-pins { + compatible = "cros-ec,pwm-led-pins"; + + color_off: color-off { + led-color = "LED_OFF"; + led-id = "EC_LED_ID_BATTERY_LED"; + led-pins = <&pwm_y 0>, + <&pwm_b 0>; + }; + + color_amber: color-amber { + led-color = "LED_AMBER"; + led-id = "EC_LED_ID_BATTERY_LED"; + br-color = "EC_LED_COLOR_AMBER"; + led-pins = <&pwm_y 100>, + <&pwm_b 0>; + }; + + color_blue: color-blue { + led-color = "LED_BLUE"; + led-id = "EC_LED_ID_BATTERY_LED"; + br-color = "EC_LED_COLOR_BLUE"; + led-pins = <&pwm_y 0>, + <&pwm_b 100>; + }; + }; +}; + +&pwm0 { + status = "okay"; + pinctrl-0 = <&pwm0_gpc3>; + pinctrl-names = "default"; +}; + +&pwm2 { + status = "okay"; + pinctrl-0 = <&pwm2_gpc4>; + pinctrl-names = "default"; +}; diff --git a/zephyr/projects/trogdor/lazor/src/hibernate.c b/zephyr/projects/trogdor/lazor/src/hibernate.c new file mode 100644 index 0000000000..388ff1b087 --- /dev/null +++ b/zephyr/projects/trogdor/lazor/src/hibernate.c @@ -0,0 +1,48 @@ +/* Copyright 2022 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +#include "common.h" +#include "sku.h" +#include "system.h" +#include "usbc_ppc.h" + +void board_hibernate(void) +{ + int i; + + if (!board_is_clamshell()) { + /* + * Sensors are unpowered in hibernate. Apply PD to the + * interrupt lines such that they don't float. + */ + gpio_pin_configure_dt( + GPIO_DT_FROM_NODELABEL(gpio_accel_gyro_int_l), + GPIO_DISCONNECTED); + gpio_pin_configure_dt( + GPIO_DT_FROM_NODELABEL(gpio_lid_accel_int_l), + GPIO_DISCONNECTED); + } + + /* + * Board rev 5+ has the hardware fix. Don't need the following + * workaround. + */ + if (system_get_board_version() >= 5) + return; + + /* + * Enable the PPC power sink path before EC enters hibernate; + * otherwise, ACOK won't go High and can't wake EC up. Check the + * bug b/170324206 for details. + */ + for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) + ppc_vbus_sink_enable(i, 1); +} + +void board_hibernate_late(void) +{ + /* Set the hibernate GPIO to turn off the rails */ + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_hibernate_l), 0); +} diff --git a/zephyr/projects/trogdor/lazor/src/i2c.c b/zephyr/projects/trogdor/lazor/src/i2c.c new file mode 100644 index 0000000000..6d737b410f --- /dev/null +++ b/zephyr/projects/trogdor/lazor/src/i2c.c @@ -0,0 +1,17 @@ +/* Copyright 2021 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +#include "i2c/i2c.h" +#include "i2c.h" + +/* Lazor board specific i2c implementation */ + +#ifdef CONFIG_PLATFORM_EC_I2C_PASSTHRU_RESTRICTED +int board_allow_i2c_passthru(const struct i2c_cmd_desc_t *cmd_desc) +{ + return (i2c_get_device_for_port(cmd_desc->port) == + i2c_get_device_for_port(I2C_PORT_VIRTUAL_BATTERY)); +} +#endif diff --git a/zephyr/projects/trogdor/lazor/src/power.c b/zephyr/projects/trogdor/lazor/src/power.c new file mode 100644 index 0000000000..96f9bc43c5 --- /dev/null +++ b/zephyr/projects/trogdor/lazor/src/power.c @@ -0,0 +1,58 @@ +/* Copyright 2022 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +#include <zephyr/init.h> +#include <zephyr/drivers/gpio.h> + +#include <ap_power/ap_power.h> +#include "power.h" +#include "task.h" +#include "gpio.h" + +static void board_power_change(struct ap_power_ev_callback *cb, + struct ap_power_ev_data data) +{ + switch (data.event) { + default: + return; + + case AP_POWER_PRE_INIT: + /* Turn on the 3.3V rail */ + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_en_pp3300_a), 1); + + /* Turn on the 5V rail. */ +#ifdef CONFIG_POWER_PP5000_CONTROL + power_5v_enable(task_get_current(), 1); +#else /* !defined(CONFIG_POWER_PP5000_CONTROL) */ + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_en_pp5000_a), 1); +#endif /* defined(CONFIG_POWER_PP5000_CONTROL) */ + break; + + case AP_POWER_SHUTDOWN_COMPLETE: + /* Turn off the 5V rail. */ +#ifdef CONFIG_POWER_PP5000_CONTROL + power_5v_enable(task_get_current(), 0); +#else /* !defined(CONFIG_POWER_PP5000_CONTROL) */ + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_en_pp5000_a), 0); +#endif /* defined(CONFIG_POWER_PP5000_CONTROL) */ + + /* Turn off the 3.3V and 5V rails. */ + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_en_pp3300_a), 0); + break; + } +} + +static int board_power_handler_init(const struct device *unused) +{ + static struct ap_power_ev_callback cb; + + /* Setup a suspend/resume callback */ + ap_power_ev_init_callback(&cb, board_power_change, + AP_POWER_PRE_INIT | + AP_POWER_SHUTDOWN_COMPLETE); + ap_power_ev_add_callback(&cb); + return 0; +} +SYS_INIT(board_power_handler_init, APPLICATION, 1); diff --git a/zephyr/projects/trogdor/lazor/src/sku.c b/zephyr/projects/trogdor/lazor/src/sku.c new file mode 100644 index 0000000000..1d88437031 --- /dev/null +++ b/zephyr/projects/trogdor/lazor/src/sku.c @@ -0,0 +1,92 @@ +/* Copyright 2022 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +#include "common.h" +#include "config.h" +#include "console.h" +#include "driver/ln9310.h" +#include "tcpm/ps8xxx_public.h" +#include "hooks.h" +#include "sku.h" +#include "system.h" +#include "util.h" + +#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ##args) +#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ##args) + +static uint8_t sku_id; + +enum board_model { + LAZOR, + LIMOZEEN, + UNKNOWN, +}; + +static const char *const model_name[] = { + "LAZOR", + "LIMOZEEN", + "UNKNOWN", +}; + +static enum board_model get_model(void) +{ + if (sku_id == 0 || sku_id == 1 || sku_id == 2 || sku_id == 3) + return LAZOR; + if (sku_id == 4 || sku_id == 5 || sku_id == 6) + return LIMOZEEN; + return UNKNOWN; +} + +/* Read SKU ID from GPIO and initialize variables for board variants */ +static void sku_init(void) +{ + sku_id = system_get_sku_id(); + CPRINTS("SKU: %u (%s)", sku_id, model_name[get_model()]); +} +DECLARE_HOOK(HOOK_INIT, sku_init, HOOK_PRIO_POST_I2C); + +enum battery_cell_type board_get_battery_cell_type(void) +{ + switch (get_model()) { + case LIMOZEEN: + return BATTERY_CELL_TYPE_3S; + default: + return BATTERY_CELL_TYPE_UNKNOWN; + } +} + +int board_is_clamshell(void) +{ + return get_model() == LIMOZEEN; +} + +__override uint16_t board_get_ps8xxx_product_id(int port) +{ + /* + * Lazor (SKU_ID: 0, 1, 2, 3) rev 3+ changes TCPC from PS8751 to + * PS8805. + * + * Limozeen (SKU_ID: 4, 5, 6) all-rev uses PS8805. + */ + if (get_model() == LAZOR && system_get_board_version() < 3) + return PS8751_PRODUCT_ID; + + return PS8805_PRODUCT_ID; +} + +int board_has_da9313(void) +{ + return get_model() == LAZOR; +} + +int board_has_buck_ic(void) +{ + return get_model() == LIMOZEEN && system_get_board_version() >= 8; +} + +int board_has_ln9310(void) +{ + return get_model() == LIMOZEEN && system_get_board_version() < 8; +} diff --git a/zephyr/projects/trogdor/lazor/src/switchcap.c b/zephyr/projects/trogdor/lazor/src/switchcap.c new file mode 100644 index 0000000000..d8205cbcfc --- /dev/null +++ b/zephyr/projects/trogdor/lazor/src/switchcap.c @@ -0,0 +1,128 @@ +/* Copyright 2022 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +#include <zephyr/drivers/gpio.h> + +#include "common.h" +#include "config.h" +#include "console.h" +#include "driver/ln9310.h" +#include "gpio/gpio_int.h" +#include "hooks.h" +#include "i2c.h" +#include "power/qcom.h" +#include "system.h" +#include "sku.h" + +#define CPRINTS(format, args...) cprints(CC_I2C, format, ##args) +#define CPRINTF(format, args...) cprintf(CC_I2C, format, ##args) + +/* LN9310 switchcap */ +const struct ln9310_config_t ln9310_config = { + .i2c_port = I2C_PORT_POWER, + .i2c_addr_flags = LN9310_I2C_ADDR_0_FLAGS, +}; + +static void switchcap_init(void) +{ + if (board_has_da9313()) { + CPRINTS("Use switchcap: DA9313"); + + /* + * When the chip in power down mode, it outputs high-Z. + * Set pull-down to avoid floating. + */ + gpio_pin_configure_dt(GPIO_DT_FROM_NODELABEL(gpio_da9313_gpio0), + GPIO_INPUT | GPIO_PULL_DOWN); + + /* + * Configure DA9313 enable, push-pull output. Don't set the + * level here; otherwise, it will override its value and + * shutdown the switchcap when sysjump to RW. + */ + gpio_pin_configure_dt(GPIO_DT_FROM_NODELABEL(gpio_switchcap_on), + GPIO_OUTPUT); + } else if (board_has_ln9310()) { + CPRINTS("Use switchcap: LN9310"); + + /* Enable interrupt for LN9310 */ + gpio_enable_dt_interrupt( + GPIO_INT_FROM_NODELABEL(int_switchcap_pg)); + + /* + * Configure LN9310 enable, open-drain output. Don't set the + * level here; otherwise, it will override its value and + * shutdown the switchcap when sysjump to RW. + * + * Note that the gpio.inc configures it GPIO_OUT_LOW. When + * sysjump to RW, will output push-pull a short period of + * time. As it outputs LOW, should be fine. + * + * This GPIO changes like: + * (1) EC boots from RO -> high-Z + * (2) GPIO init according to gpio.inc -> push-pull LOW + * (3) This function configures it -> open-drain HIGH + * (4) Power sequence turns on the switchcap -> open-drain LOW + * (5) EC sysjumps to RW + * (6) GPIO init according to gpio.inc -> push-pull LOW + * (7) This function configures it -> open-drain LOW + */ + gpio_pin_configure_dt(GPIO_DT_FROM_NODELABEL(gpio_switchcap_on), + GPIO_OUTPUT | GPIO_OPEN_DRAIN); + + /* Only configure the switchcap if not sysjump */ + if (!system_jumped_late()) { + /* + * Deassert the enable pin, so the + * switchcap won't be enabled after the switchcap is + * configured from standby mode to switching mode. + */ + gpio_pin_set_dt( + GPIO_DT_FROM_NODELABEL(gpio_switchcap_on), 0); + ln9310_init(); + } + } else if (board_has_buck_ic()) { + CPRINTS("Use Buck IC"); + } else { + CPRINTS("ERROR: No switchcap solution"); + } +} +DECLARE_HOOK(HOOK_INIT, switchcap_init, HOOK_PRIO_DEFAULT); + +void board_set_switchcap_power(int enable) +{ + if (board_has_da9313()) { + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_switchcap_on), + enable); + } else if (board_has_ln9310()) { + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_switchcap_on), + enable); + ln9310_software_enable(enable); + } else if (board_has_buck_ic()) { + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_vbob_en), enable); + } +} + +int board_is_switchcap_enabled(void) +{ + if (board_has_da9313() || board_has_ln9310()) + return gpio_pin_get_dt( + GPIO_DT_FROM_NODELABEL(gpio_switchcap_on)); + + /* Board has buck ic*/ + return gpio_pin_get_dt(GPIO_DT_FROM_NODELABEL(gpio_vbob_en)); +} + +int board_is_switchcap_power_good(void) +{ + if (board_has_da9313()) + return gpio_pin_get_dt( + GPIO_DT_FROM_NODELABEL(gpio_da9313_gpio0)); + else if (board_has_ln9310()) + return ln9310_power_good(); + + /* Board has buck ic no way to check POWER GOOD */ + return 1; +} diff --git a/zephyr/projects/trogdor/lazor/src/usb_pd_policy.c b/zephyr/projects/trogdor/lazor/src/usb_pd_policy.c new file mode 100644 index 0000000000..8d046826f9 --- /dev/null +++ b/zephyr/projects/trogdor/lazor/src/usb_pd_policy.c @@ -0,0 +1,261 @@ +/* Copyright 2022 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +#include <zephyr/drivers/gpio.h> + +#include "charge_manager.h" +#include "chipset.h" +#include "console.h" +#include "system.h" +#include "usb_mux.h" +#include "usbc_ppc.h" +#include "util.h" + +#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ##args) +#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ##args) + +int pd_check_vconn_swap(int port) +{ + /* In G3, do not allow vconn swap since PP5000 rail is off */ + return gpio_pin_get_dt(GPIO_DT_FROM_NODELABEL(gpio_en_pp5000_a)); +} + +static uint8_t vbus_en[CONFIG_USB_PD_PORT_MAX_COUNT]; +#if CONFIG_USB_PD_PORT_MAX_COUNT == 1 +static uint8_t vbus_rp[CONFIG_USB_PD_PORT_MAX_COUNT] = { TYPEC_RP_1A5 }; +#else +static uint8_t vbus_rp[CONFIG_USB_PD_PORT_MAX_COUNT] = { TYPEC_RP_1A5, + TYPEC_RP_1A5 }; +#endif + +static void board_vbus_update_source_current(int port) +{ + /* Both port are controlled by PPC SN5S330. */ + ppc_set_vbus_source_current_limit(port, vbus_rp[port]); + ppc_vbus_source_enable(port, vbus_en[port]); +} + +void pd_power_supply_reset(int port) +{ + int prev_en; + + prev_en = vbus_en[port]; + + /* Disable VBUS */ + vbus_en[port] = 0; + board_vbus_update_source_current(port); + + /* Enable discharge if we were previously sourcing 5V */ + if (prev_en) + pd_set_vbus_discharge(port, 1); + + /* notify host of power info change */ + pd_send_host_event(PD_EVENT_POWER_CHANGE); +} + +int pd_set_power_supply_ready(int port) +{ + /* Disable charging */ + board_vbus_sink_enable(port, 0); + + pd_set_vbus_discharge(port, 0); + + /* Provide VBUS */ + vbus_en[port] = 1; + board_vbus_update_source_current(port); + + /* notify host of power info change */ + pd_send_host_event(PD_EVENT_POWER_CHANGE); + + return EC_SUCCESS; /* we are ready */ +} + +int board_vbus_source_enabled(int port) +{ + return vbus_en[port]; +} + +__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp) +{ + vbus_rp[port] = rp; + board_vbus_update_source_current(port); +} + +int pd_snk_is_vbus_provided(int port) +{ + return tcpm_check_vbus_level(port, VBUS_PRESENT); +} + +/* ----------------- Vendor Defined Messages ------------------ */ +#ifdef CONFIG_USB_PD_ALT_MODE_DFP +__override int svdm_dp_config(int port, uint32_t *payload) +{ + int opos = pd_alt_mode(port, TCPCI_MSG_SOP, USB_SID_DISPLAYPORT); + uint8_t pin_mode = get_dp_pin_mode(port); + + if (!pin_mode) + return 0; + + /* + * Defer setting the usb_mux until HPD goes high, svdm_dp_attention(). + * The AP only supports one DP phy. An external DP mux switches between + * the two ports. Should switch those muxes when it is really used, + * i.e. HPD high; otherwise, the real use case is preempted, like: + * (1) plug a dongle without monitor connected to port-0, + * (2) plug a dongle without monitor connected to port-1, + * (3) plug a monitor to the port-1 dongle. + */ + + payload[0] = + VDO(USB_SID_DISPLAYPORT, 1, CMD_DP_CONFIG | VDO_OPOS(opos)); + payload[1] = VDO_DP_CFG(pin_mode, /* pin mode */ + 1, /* DPv1.3 signaling */ + 2); /* UFP connected */ + return 2; +}; + +__override void svdm_dp_post_config(int port) +{ + dp_flags[port] |= DP_FLAGS_DP_ON; +} + +/** + * Is the port fine to be muxed its DisplayPort lines? + * + * Only one port can be muxed to DisplayPort at a time. + * + * @param port Port number of TCPC. + * @return 1 is fine; 0 is bad as other port is already muxed; + */ +static int is_dp_muxable(int port) +{ + int i; + + for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) + if (i != port) { + if (usb_mux_get(i) & USB_PD_MUX_DP_ENABLED) + return 0; + } + + return 1; +} + +__override int svdm_dp_attention(int port, uint32_t *payload) +{ + const struct gpio_dt_spec *hpd = + GPIO_DT_FROM_NODELABEL(gpio_dp_hot_plug_det); + int lvl = PD_VDO_DPSTS_HPD_LVL(payload[1]); + int irq = PD_VDO_DPSTS_HPD_IRQ(payload[1]); + int cur_lvl = gpio_pin_get_dt(hpd); + mux_state_t mux_state; + + dp_status[port] = payload[1]; + + if (!is_dp_muxable(port)) { + /* TODO(waihong): Info user? */ + CPRINTS("p%d: The other port is already muxed.", port); + return 0; + } + + /* + * Initial implementation to handle HPD. Only the first-plugged port + * works, i.e. sending HPD signal to AP. The second-plugged port + * will be ignored. + * + * TODO(waihong): Continue the above case, if the first-plugged port + * is then unplugged, switch to the second-plugged port and signal AP? + */ + if (lvl) { + /* + * Enable and switch the DP port selection mux to the + * correct port. + * + * TODO(waihong): Better to move switching DP mux to + * the usb_mux abstraction. + */ + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_dp_mux_sel), + port == 1); + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_dp_mux_oe_l), 0); + + /* Connect the SBU lines in PPC chip. */ + if (IS_ENABLED(CONFIG_USBC_PPC_SBU)) + ppc_set_sbu(port, 1); + + /* + * Connect the USB SS/DP lines in TCPC chip. + * + * When mf_pref not true, still use the dock muxing + * because of the board USB-C topology (limited to 2 + * lanes DP). + */ + usb_mux_set(port, USB_PD_MUX_DOCK, USB_SWITCH_CONNECT, + polarity_rm_dts(pd_get_polarity(port))); + } else { + /* Disconnect the DP port selection mux. */ + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_dp_mux_oe_l), 1); + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_dp_mux_sel), 0); + + /* Disconnect the SBU lines in PPC chip. */ + if (IS_ENABLED(CONFIG_USBC_PPC_SBU)) + ppc_set_sbu(port, 0); + + /* Disconnect the DP but keep the USB SS lines in TCPC chip. */ + usb_mux_set(port, USB_PD_MUX_USB_ENABLED, USB_SWITCH_CONNECT, + polarity_rm_dts(pd_get_polarity(port))); + } + + if (chipset_in_state(CHIPSET_STATE_ANY_SUSPEND) && (irq || lvl)) + /* + * Wake up the AP. IRQ or level high indicates a DP sink is now + * present. + */ + pd_notify_dp_alt_mode_entry(port); + + /* Configure TCPC for the HPD event, for proper muxing */ + mux_state = (lvl ? USB_PD_MUX_HPD_LVL : USB_PD_MUX_HPD_LVL_DEASSERTED) | + (irq ? USB_PD_MUX_HPD_IRQ : USB_PD_MUX_HPD_IRQ_DEASSERTED); + usb_mux_hpd_update(port, mux_state); + + /* Signal AP for the HPD event, through GPIO to AP */ + if (irq & cur_lvl) { + uint64_t now = get_time().val; + /* Wait for the minimum spacing between IRQ_HPD if needed */ + if (now < svdm_hpd_deadline[port]) + usleep(svdm_hpd_deadline[port] - now); + + /* Generate IRQ_HPD pulse */ + gpio_pin_set_dt(hpd, 0); + usleep(HPD_DSTREAM_DEBOUNCE_IRQ); + gpio_pin_set_dt(hpd, 1); + + /* Set the minimum time delay (2ms) for the next HPD IRQ */ + svdm_hpd_deadline[port] = + get_time().val + HPD_USTREAM_DEBOUNCE_LVL; + } else if (irq & !lvl) { + CPRINTF("ERR:HPD:IRQ&LOW\n"); + return 0; + } + gpio_pin_set_dt(hpd, lvl); + /* Set the minimum time delay (2ms) for the next HPD IRQ */ + svdm_hpd_deadline[port] = get_time().val + HPD_USTREAM_DEBOUNCE_LVL; + + return 1; +} + +__override void svdm_exit_dp_mode(int port) +{ + if (is_dp_muxable(port)) { + /* Disconnect the DP port selection mux. */ + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_dp_mux_oe_l), 1); + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_dp_mux_sel), 0); + + /* Signal AP for the HPD low event */ + usb_mux_hpd_update(port, USB_PD_MUX_HPD_LVL_DEASSERTED | + USB_PD_MUX_HPD_IRQ_DEASSERTED); + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_dp_hot_plug_det), + 0); + } +} +#endif /* CONFIG_USB_PD_ALT_MODE_DFP */ diff --git a/zephyr/projects/trogdor/lazor/src/usbc_config.c b/zephyr/projects/trogdor/lazor/src/usbc_config.c new file mode 100644 index 0000000000..f6bfdfb186 --- /dev/null +++ b/zephyr/projects/trogdor/lazor/src/usbc_config.c @@ -0,0 +1,335 @@ +/* Copyright 2022 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* Lazor board-specific USB-C configuration */ + +#include "battery_fuel_gauge.h" +#include "bc12/pi3usb9201_public.h" +#include "charger.h" +#include "charger/isl923x_public.h" +#include "charge_manager.h" +#include "charge_state.h" +#include "common.h" +#include "config.h" +#include "driver/ln9310.h" +#include "gpio_signal.h" +#include "gpio/gpio_int.h" +#include "hooks.h" +#include "ppc/sn5s330_public.h" +#include "system.h" +#include "tcpm/ps8xxx_public.h" +#include "tcpm/tcpci.h" +#include "timer.h" +#include "usb_pd.h" +#include "usb_mux.h" +#include "usbc_ocp.h" +#include "usbc_ppc.h" + +#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ##args) +#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ##args) + +int charger_profile_override(struct charge_state_data *curr) +{ + int usb_mv; + int port; + + if (curr->state != ST_CHARGE) + return 0; + + /* Lower the max requested voltage to 5V when battery is full. */ + if (chipset_in_state(CHIPSET_STATE_ANY_OFF) && + !(curr->batt.flags & BATT_FLAG_BAD_STATUS) && + !(curr->batt.flags & BATT_FLAG_WANT_CHARGE) && + (curr->batt.status & STATUS_FULLY_CHARGED)) + usb_mv = 5000; + else + usb_mv = PD_MAX_VOLTAGE_MV; + + if (pd_get_max_voltage() != usb_mv) { + CPRINTS("VBUS limited to %dmV", usb_mv); + for (port = 0; port < CONFIG_USB_PD_PORT_MAX_COUNT; port++) + pd_set_external_voltage_limit(port, usb_mv); + } + + return 0; +} + +enum ec_status charger_profile_override_get_param(uint32_t param, + uint32_t *value) +{ + return EC_RES_INVALID_PARAM; +} + +enum ec_status charger_profile_override_set_param(uint32_t param, + uint32_t value) +{ + return EC_RES_INVALID_PARAM; +} + +static void usba_oc_deferred(void) +{ + /* Use next number after all USB-C ports to indicate the USB-A port */ + board_overcurrent_event( + CONFIG_USB_PD_PORT_MAX_COUNT, + !gpio_pin_get_dt(GPIO_DT_FROM_NODELABEL(gpio_usb_a0_oc_odl))); +} +DECLARE_DEFERRED(usba_oc_deferred); + +void usba_oc_interrupt(enum gpio_signal signal) +{ + hook_call_deferred(&usba_oc_deferred_data, 0); +} + +void ppc_interrupt(enum gpio_signal signal) +{ + switch (signal) { + case GPIO_SIGNAL(DT_NODELABEL(gpio_usb_c0_swctl_int_odl)): + sn5s330_interrupt(0); + break; + case GPIO_SIGNAL(DT_NODELABEL(gpio_usb_c1_swctl_int_odl)): + sn5s330_interrupt(1); + break; + default: + break; + } +} + +static void board_connect_c0_sbu_deferred(void) +{ + /* + * If CCD_MODE_ODL asserts, it means there's a debug accessory connected + * and we should enable the SBU FETs. + */ + ppc_set_sbu(0, 1); +} +DECLARE_DEFERRED(board_connect_c0_sbu_deferred); + +void board_connect_c0_sbu(enum gpio_signal s) +{ + hook_call_deferred(&board_connect_c0_sbu_deferred_data, 0); +} + +/* GPIO Interrupt Handlers */ +void tcpc_alert_event(enum gpio_signal signal) +{ + int port = -1; + + switch (signal) { + case GPIO_USB_C0_PD_INT_ODL: + port = 0; + break; + case GPIO_USB_C1_PD_INT_ODL: + port = 1; + break; + default: + return; + } + + schedule_deferred_pd_interrupt(port); +} + +/* + * Port-0/1 USB mux driver. + * + * The USB mux is handled by TCPC chip and the HPD update is through a GPIO + * to AP. But the TCPC chip is also needed to know the HPD status; otherwise, + * the mux misbehaves. + */ +const struct usb_mux_chain usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { + { + .mux = + &(const struct usb_mux){ + .usb_port = 0, + .driver = &tcpci_tcpm_usb_mux_driver, + .hpd_update = &ps8xxx_tcpc_update_hpd_status, + }, + }, + { + .mux = + &(const struct usb_mux){ + .usb_port = 1, + .driver = &tcpci_tcpm_usb_mux_driver, + .hpd_update = &ps8xxx_tcpc_update_hpd_status, + }, + } +}; + +__override int board_get_default_battery_type(void) +{ + /* + * A 2S battery is set as default. If the board is configured to use + * a 3S battery, according to its SKU_ID, return a 3S battery as + * default. It helps to configure the charger to output a correct + * voltage in case the battery is not attached. + */ + if (board_get_battery_cell_type() == BATTERY_CELL_TYPE_3S) + return BATTERY_LGC_AP18C8K; + + return DEFAULT_BATTERY_TYPE; +} + +/* Initialize board USC-C things */ +static void board_init_usbc(void) +{ + /* Enable USB-A overcurrent interrupt */ + gpio_enable_dt_interrupt(GPIO_INT_FROM_NODELABEL(int_usb_a0_oc)); + /* + * The H1 SBU line for CCD are behind PPC chip. The PPC internal FETs + * for SBU may be disconnected after DP alt mode is off. Should enable + * the CCD_MODE_ODL interrupt to make sure the SBU FETs are connected. + */ + gpio_enable_dt_interrupt(GPIO_INT_FROM_NODELABEL(int_ccd_mode)); +} +DECLARE_HOOK(HOOK_INIT, board_init_usbc, HOOK_PRIO_DEFAULT); + +void board_tcpc_init(void) +{ + /* Only reset TCPC if not sysjump */ + if (!system_jumped_late()) { + /* TODO(crosbug.com/p/61098): How long do we need to wait? */ + board_reset_pd_mcu(); + } + + /* Enable PPC interrupts */ + gpio_enable_dt_interrupt(GPIO_INT_FROM_NODELABEL(int_usb_c0_swctl)); + + /* Enable TCPC interrupts */ + gpio_enable_dt_interrupt(GPIO_INT_FROM_NODELABEL(int_usb_c0_tcpc)); + gpio_enable_dt_interrupt(GPIO_INT_FROM_NODELABEL(int_usb_c0_tcpc)); + + /* + * Initialize HPD to low; after sysjump SOC needs to see + * HPD pulse to enable video path + */ + for (int port = 0; port < CONFIG_USB_PD_PORT_MAX_COUNT; ++port) + usb_mux_hpd_update(port, USB_PD_MUX_HPD_LVL_DEASSERTED | + USB_PD_MUX_HPD_IRQ_DEASSERTED); +} +DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_POST_I2C); + +void board_reset_pd_mcu(void) +{ + cprints(CC_USB, "Resetting TCPCs..."); + cflush(); + + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_usb_c0_pd_rst_l), 0); + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_usb_c1_pd_rst_l), 0); + msleep(PS8XXX_RESET_DELAY_MS); + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_usb_c0_pd_rst_l), 1); + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_usb_c1_pd_rst_l), 1); +} + +void board_set_tcpc_power_mode(int port, int mode) +{ + /* Ignore the "mode" to turn the chip on. We can only do a reset. */ + if (mode) + return; + + board_reset_pd_mcu(); +} + +int board_vbus_sink_enable(int port, int enable) +{ + /* Both ports are controlled by PPC SN5S330 */ + return ppc_vbus_sink_enable(port, enable); +} + +int board_is_sourcing_vbus(int port) +{ + /* Both ports are controlled by PPC SN5S330 */ + return ppc_is_sourcing_vbus(port); +} + +void board_overcurrent_event(int port, int is_overcurrented) +{ + /* TODO(b/120231371): Notify AP */ + CPRINTS("p%d: overcurrent!", port); +} + +int board_set_active_charge_port(int port) +{ + int is_real_port = (port >= 0 && port < CONFIG_USB_PD_PORT_MAX_COUNT); + int i; + + if (!is_real_port && port != CHARGE_PORT_NONE) + return EC_ERROR_INVAL; + + if (port == CHARGE_PORT_NONE) { + CPRINTS("Disabling all charging port"); + + /* Disable all ports. */ + for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) { + /* + * Do not return early if one fails otherwise we can + * get into a boot loop assertion failure. + */ + if (board_vbus_sink_enable(i, 0)) + CPRINTS("Disabling p%d sink path failed.", i); + } + + return EC_SUCCESS; + } + + /* Check if the port is sourcing VBUS. */ + if (board_is_sourcing_vbus(port)) { + CPRINTS("Skip enable p%d", port); + return EC_ERROR_INVAL; + } + + CPRINTS("New charge port: p%d", port); + + /* + * Turn off the other ports' sink path FETs, before enabling the + * requested charge port. + */ + for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) { + if (i == port) + continue; + + if (board_vbus_sink_enable(i, 0)) + CPRINTS("p%d: sink path disable failed.", i); + } + + /* Enable requested charge port. */ + if (board_vbus_sink_enable(port, 1)) { + CPRINTS("p%d: sink path enable failed.", port); + return EC_ERROR_UNKNOWN; + } + + return EC_SUCCESS; +} + +void board_set_charge_limit(int port, int supplier, int charge_ma, int max_ma, + int charge_mv) +{ + /* + * Ignore lower charge ceiling on PD transition if our battery is + * critical, as we may brownout. + */ + if (supplier == CHARGE_SUPPLIER_PD && charge_ma < 1500 && + charge_get_percent() < CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON) { + CPRINTS("Using max ilim %d", max_ma); + charge_ma = max_ma; + } + + charge_set_input_current_limit( + MAX(charge_ma, CONFIG_CHARGER_INPUT_CURRENT), charge_mv); +} + +uint16_t tcpc_get_alert_status(void) +{ + uint16_t status = 0; + + if (!gpio_pin_get_dt(GPIO_DT_FROM_NODELABEL(gpio_usb_c0_pd_int_odl))) + if (gpio_pin_get_dt( + GPIO_DT_FROM_NODELABEL(gpio_usb_c0_pd_rst_l))) + status |= PD_STATUS_TCPC_ALERT_0; + if (!gpio_pin_get_dt(GPIO_DT_FROM_NODELABEL(gpio_usb_c0_pd_int_odl))) + if (gpio_pin_get_dt( + GPIO_DT_FROM_NODELABEL(gpio_usb_c1_pd_rst_l))) + status |= PD_STATUS_TCPC_ALERT_1; + + return status; +} diff --git a/zephyr/projects/trogdor/lazor/usbc.dts b/zephyr/projects/trogdor/lazor/usbc.dts new file mode 100644 index 0000000000..7864c2716b --- /dev/null +++ b/zephyr/projects/trogdor/lazor/usbc.dts @@ -0,0 +1,36 @@ +/* Copyright 2022 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/ { + usbc { + #address-cells = <1>; + #size-cells = <0>; + + /* TODO(b/227359762): lazor: move UBC-C configuration into the + * devicetree + */ + port0@0 { + compatible = "named-usbc-port"; + reg = <0>; + + bc12 = <&bc12_port0>; + tcpc = <&tcpc_port0>; + + ppc = <&ppc_port0>; + + chg = <&charger>; + }; + + port1@1 { + compatible = "named-usbc-port"; + reg = <1>; + + bc12 = <&bc12_port1>; + tcpc = <&tcpc_port1>; + + ppc = <&ppc_port1>; + }; + }; +}; |