delta/coreboot/chrome-ec.git - review.coreboot.org: chrome-ec.git

	Commit message (Expand)	Author	Age	Files	Lines
*	Cr50: Change SYS_RST output to SYS_RST_L inout	Bill Richardson	2016-04-16	3	-3/+25
*	Cr50: Remove HOSTCMD task	Bill Richardson	2016-04-15	1	-1/+0
*	Cr50: Add DIO_PULL_UP and DIO_PULL_DOWN flags	Bill Richardson	2016-04-15	2	-8/+32
*	cr50: Enable RD Detection	Mary Ruthven	2016-04-15	1	-0/+3
*	cr50: enable AP and EC UART in CCD MODE	Mary Ruthven	2016-04-15	5	-29/+102
*	amenia: update charge LED control	Kevin K Wong	2016-04-15	3	-50/+44
*	amenia: enable BMM150 compass	Kevin K Wong	2016-04-15	4	-2/+45
*	amenia: initial board code	Kevin K Wong	2016-04-15	10	-0/+1594
*	Cr50: Update the USB VID:PID:subclass constants	Bill Richardson	2016-04-15	6	-27/+28
*	ectool: Remove CROS_EC_DEV_IOCRDMEM	Gwendal Grignou	2016-04-15	4	-70/+39
*	apollolake: Remove timing delay for SOC_PWROK and RSMRST_N	Kevin K Wong	2016-04-15	1	-10/+3
*	chip: it83xx: Add i2c channel d/e/f function	Eli Hsu	2016-04-14	7	-100/+668
*	cr50: fix AP UART	Mary Ruthven	2016-04-14	1	-2/+2
*	CR50: handle big-endian RSA keys	nagendra modadugu	2016-04-14	1	-109/+147
*	make: allow to see boards failed when making 'buildall'	Vadim Bendebury	2016-04-14	2	-1/+8
*	power/rk3399: Implement chipset reset / shutdown routines	Shawn Nematbakhsh	2016-04-14	1	-8/+15
*	CR50: add support for HKDF (RFC 5869)	nagendra modadugu	2016-04-14	9	-0/+298
*	kevin: Remove KBLIGHT module	Shawn Nematbakhsh	2016-04-14	2	-3/+2
*	CR50: handle big-endian ECC parameters	nagendra modadugu	2016-04-14	1	-34/+98
*	Kunimitsu: remove console commands for code size	Kyoung Kim	2016-04-14	5	-4/+10
*	power: mediatek: correct a typo in set_pmic_pwron	Koro Chen	2016-04-14	1	-1/+1
*	elm: initial elm mainboard	Rong Chang	2016-04-14	11	-7/+1578
*	tpmtest: support FTDI SPI on UltraDebug	Vadim Bendebury	2016-04-13	1	-0/+1
*	cr50: Detect debug cable and switch the PHY	Mary Ruthven	2016-04-13	8	-10/+110
*	chip: it83xx: disable sleep while fan control loop ongoing	Dino Li	2016-04-13	2	-11/+10
*	pd: Fix multiple reboot for battery cut-off	Divya Sasidharan	2016-04-13	2	-0/+10
*	Driver: BD99955: Add code to enable both VBUS_EN & VCC_EN for PG3	Vijay Hiremath	2016-04-13	2	-10/+9
*	kevin: Don't disable both charge ports when we source VBUS	Shawn Nematbakhsh	2016-04-13	1	-2/+3
*	apollolake: ignore PLTRST# from SOC unless RSMRST# to soc is deasserted	Kevin K Wong	2016-04-13	1	-0/+8
*	charger_state_v2: force static battery info update on battery change	Kevin K Wong	2016-04-13	1	-0/+5
*	cr50: default to CCD PHY	Mary Ruthven	2016-04-13	2	-6/+12
*	ectool: Upgrade to improved ioctl format	Guenter Roeck	2016-04-12	3	-4/+156
*	Cr50: Enable RW FW updates over USB	Bill Richardson	2016-04-12	4	-3/+8
*	Cr50: Add userspace tool to update RW FW over USB	Bill Richardson	2016-04-12	4	-0/+496
*	Cr50: New usb_upgrade module for RW updates	Bill Richardson	2016-04-12	9	-179/+456
*	Add header files needed by gpio_list.h	Daisuke Nojiri	2016-04-12	1	-0/+2
*	chell: pmic: Delay disable of V0.85A	Shawn Nematbakhsh	2016-04-12	2	-2/+38
*	chell: pmic: enable 100 ohm discharge on V1.00A	Shawn Nematbakhsh	2016-04-12	1	-1/+7
*	chip: it83xx: disable USB module's clock at default	Dino Li	2016-04-11	2	-18/+2
*	g: Add USB_STREAM_CONFIG_FULL macro to usb-stream.h	Bill Richardson	2016-04-11	1	-12/+41
*	chell / kunimitsu / lars: Enable CONFIG_USB_PD_COMM_LOCKED	Shawn Nematbakhsh	2016-04-11	3	-0/+3
*	pd: Add config to disable PD communication in locked RO	Shawn Nematbakhsh	2016-04-11	6	-23/+31
*	oak: increase HOSTCMD task stack size	YH Huang	2016-04-11	1	-1/+1
*	Support RW_B in sysjump command when applicablestabilize-8172.47.B	Bill Richardson	2016-04-08	2	-2/+23
*	Cr50: Add console command "usb" for testing	Bill Richardson	2016-04-07	2	-13/+44
*	cr50: forward console through USB	Mary Ruthven	2016-04-07	2	-93/+188
*	cr50: enable AP and EC UART forwarding	Mary Ruthven	2016-04-07	2	-4/+11
*	cr50: export AP and EC UART through USB	Mary Ruthven	2016-04-07	7	-5/+212
*	cr50: add support for creating multiple serial endpoints	Mary Ruthven	2016-04-07	10	-360/+461
*	Driver: BD99955: Set minimum charge current & charge voltage values	Vijay Hiremath	2016-04-07	2	-14/+8