summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* Clear OWNERS for factory/firmware branchfirmware-candy-5216.310.BBrian Norris2021-09-101-0/+1
| | | | | | | | | | | | BUG=none TEST=none Change-Id: I0f03f432ada1064ffba9595be78ca7ab4d25ecd1 Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3155142 Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Owners-Override: Jora Jacobi <jora@google.com> Tested-by: Jack Rosenthal <jrosenth@chromium.org>
* Candy: Add touchscreen enable pin control for Elan touchscreen power-on sequenceBruce Wan2014-11-144-0/+26
| | | | | | | | | | | | | | | | | Candy use TS_EN to enable touchscreen, and TOUCH_RST_L for RESETB signal, so we need add TOUCHSCREEN_ENABLE control for Elan touchscreen power-on sequence. BUG=chrome-os-partner:32284 BRANCH=rambi TEST=manual Candy use TS_EN to enable touchscreen, and TOUCH_RST_L for RESETB signal. Signed-off-by: Bruce Wan <Bruce.Wan@quantatw.com> Change-Id: Ia1f568302c17ab7ed31220370412b1c27ae5dc2f Reviewed-on: https://chromium-review.googlesource.com/228983 Tested-by: Bruce Wan <Bruce.Wan@quantatw.com> Reviewed-by: Mohammed Habibulla <moch@chromium.org> Commit-Queue: Devin Lu <Devin.Lu@quantatw.com>
* EC:KBC: Wait until LPC host senses the IRQ and gets the character.Kenji Chen2014-10-281-1/+6
| | | | | | | | | | | | BRANCH=master BUG=chrome-os-partner:29139 TEST=Buiid an EC FW image and run on Rambi to test if key loss is improved and any side effect somes with this change. Need more test units to confirm this. Signed-off-by: Kenji Chen <kenji.chen@intel.com> Change-Id: I2399e33d2ca3defe8cd9b1f94ab0af1db7f84635 Reviewed-on: https://chromium-review.googlesource.com/226005 Reviewed-by: Mohammed Habibulla <moch@chromium.org>
* Parry: Initial EC commitKayalvizhi Dhandapani2014-10-168-0/+652
| | | | | | | | | | | BUG=None TEST=Compiled, Tested on rambi BRANCH=Rambi 5216.B Change-Id: Ie9ff81f8c9a5ed2e45473cc14106183b6850f201 Signed-off-by: Kayalvizhi Dhandapani <kayalvizhid@ami.com> Reviewed-on: https://chromium-review.googlesource.com/223131 Reviewed-by: Mohammed Habibulla <moch@chromium.org>
* cranky: Modify battery LED settings to meet cranky ID design.Grover Yen2014-10-143-22/+23
| | | | | | | | | | | | | | | Exchange PWM channel of battery LED and change battery LED green color to blue color. BUG=none BRANCH=none TEST=Confirm battery LED is violet color in normal charge case and it is blue if battery level near full. Change-Id: Ib0b945d547c4f1cba16018d9c5622d5e4d777e44 Signed-off-by: Grover Yen <Grover_Yen@wistron.com> Reviewed-on: https://chromium-review.googlesource.com/221411 Reviewed-by: Mohammed Habibulla <moch@chromium.org>
* Candy: Implement the battery LED behaviorDevin Lu2014-09-103-46/+46
| | | | | | | | | | | | | | | | | Add LED behavior for candy that will the same as wolf. BUG=None BRANCH=rambi TEST=manual Check battery LED show white when battery in charging. Check battery LED turn off when battery fully with ac mode. Check battery LED show amber and blinking every 500ms when charging error. Check battery LED show amber when battery capacity under 15%. Change-Id: Ia445f3b233aaa5d0bcf70accfdc950f1c8158c36 Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/216391 Reviewed-by: Mohammed Habibulla <moch@chromium.org>
* Candy: Add battery present function supportDevin Lu2014-09-022-0/+3
| | | | | | | | | | | | | | Add battery present pin. BUG=none BRANCH=rambi TEST=manual Check system can boot up quickly with ac only. Change-Id: I6daa4b35d904014134f88a511819e7c6602e2860 Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/215901 Reviewed-by: Marc Jones <marc.jones@se-eng.com>
* Candy: Modify adpater input current and battery configurationDevin Lu2014-09-022-7/+7
| | | | | | | | | | | | | | | | | Set input current to 3072mA for 65w adpater and config battery configuration for candy. BUG=None BRANCH=rambi TEST=manual build ec and flash to candy board, Verify input current with 'adc' console command while system charging the battery and under heavy load. verify battery works. Change-Id: I3a104ab4e29a8d055c9ee5d4713bbfef82025757 Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/215811 Reviewed-by: Marc Jones <marc.jones@se-eng.com>
* Candy: Initial boardDevin Lu2014-08-278-0/+652
| | | | | | | | | | | | | | | Copy rambi and rename for candy. BUG=None BRANCH=rambi TEST=manual Run "make -j buildall" Run "make -j BOARD=candy tests" Change-Id: Ia35c00e914f56ccf9b48298315bc93bd077aef05 Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/214160 Reviewed-by: Marc Jones <marc.jones@se-eng.com>
* winky : Change stack size in charge taskyoojin2014-08-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | System was reset by stack overflow in charger task, when battery i2c communication is failed. Winky system needs a minimum of 520 byte to use stack in charger task. So, stack size in charger task should be changed to 640 byte. BUG=chrome-os-partner:31568 TEST=emerge-winky chromeos-ec Check stack size in charger task Change-Id: I130aecbdb973f1a2e7f18a46e49625844ffc827a Reviewed-on: https://chromium-review.googlesource.com/213996 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Mohammed Habibulla <moch@chromium.org> Reviewed-by: YongBeum Ha <ybha@samsung.com> Commit-Queue: YongBeum Ha <ybha@samsung.com> Tested-by: YongBeum Ha <ybha@samsung.com>
* cranky: Implement LAN power control.Grover Yen2014-08-204-0/+18
| | | | | | | | | | | | | | | | Based on the code cloned from rambi, and 1.Apply PM6 as LAN power control pin. 2.Enable LAN power in S0 and S3. BUG=chrome-os-partner:30749 BRANCH=none TEST=make -j buildall, make -j tests Change-Id: I27031b26f595cfcb790c919aff347eb310a626d5 Signed-off-by: Grover Yen <Grover_Yen@wistron.com> Reviewed-on: https://chromium-review.googlesource.com/212598 Reviewed-by: Randall Spangler <rspangler@chromium.org> Reviewed-by: Mohammed Habibulla <moch@chromium.org>
* cranky: Disable key scan task.Grover Yen2014-08-201-2/+1
| | | | | | | | | | | | | | Base on the code cloned from rambi and disable key scan task. BUG=none BRANCH=none TEST=make -j buildall, make -j tests Change-Id: I216b66ffbc08470b6037c78bc972f2a72f02d9f8 Signed-off-by: Grover Yen <Grover_Yen@wistron.com> Reviewed-on: https://chromium-review.googlesource.com/212903 Reviewed-by: Mohammed Habibulla <moch@chromium.org> Reviewed-by: Randall Spangler <rspangler@chromium.org>
* cranky: Configure GPIO setting for VIDEO_DISABLE_L.Grover Yen2014-08-202-0/+2
| | | | | | | | | | | | | | | Based on the code cloned from rambi, and apply PH2 as VIDEO_DISABLE_L pin, keep OD high after chip init. BUG=none BRANCH=none TEST=make -j buildall, make -j tests Change-Id: I0774f64f8c4044535f34280001b24ef714beb100 Signed-off-by: Grover Yen <Grover_Yen@wistron.com> Reviewed-on: https://chromium-review.googlesource.com/212597 Reviewed-by: Mohammed Habibulla <moch@chromium.org> Reviewed-by: Randall Spangler <rspangler@chromium.org>
* cranky: Implement power LED controlGrover Yen2014-08-203-17/+89
| | | | | | | | | | | | | Based on the code cloned from rambi, and implement power LED control. BUG=chrome-os-partner:30453 BRANCH=none TEST=make -j buildall, make -j tests Change-Id: Ic1d05adcce9026678df7ae7bed05725636a7a5b3 Signed-off-by: Grover Yen <Grover_Yen@wistron.com> Reviewed-on: https://chromium-review.googlesource.com/212471 Reviewed-by: Mohammed Habibulla <moch@chromium.org>
* cranky: Implement recovery buttonGrover Yen2014-08-202-0/+4
| | | | | | | | | | | | | | Based on the code cloned from rambi and enable recovery button function. BUG=chrome-os-partner:30750 BRANCH=none TEST=make -j buildall, make -j tests Change-Id: I9a8a5efedc6a4cbf3448df517555b2050461b186 Signed-off-by: Grover Yen <Grover_Yen@wistron.com> Reviewed-on: https://chromium-review.googlesource.com/212593 Reviewed-by: Randall Spangler <rspangler@chromium.org> Reviewed-by: Mohammed Habibulla <moch@chromium.org>
* cranky: Implement volume up/down buttonGrover Yen2014-08-202-0/+16
| | | | | | | | | | | | | Based on the code cloned from rambi, implement volume up/down button. BUG=chrome-os-partner:30747 BRANCH=none TEST=make -j buildall, make -j tests Change-Id: I0097d9b6b93fd247bb1d7f4469a10db71ae959e0 Signed-off-by: Grover Yen <Grover_Yen@wistron.com> Reviewed-on: https://chromium-review.googlesource.com/212611 Reviewed-by: Mohammed Habibulla <moch@chromium.org>
* winky : Add to change charging currunt on near full charge.YB.Ha2014-08-081-1/+2
| | | | | | | | | | | | | | | | | PWR_STATE_CHARGE_NEAR_FULL also need to change charging current by FCC * 0.6 for battery safety and charging time. BUG=chrome-os-partner:31146 TEST=emerge-winky chromeos-ec Check charging current by i2c register. Change-Id: I1c0ea803c663dcc4147a31a3af33864b592bf89b Reviewed-on: https://chromium-review.googlesource.com/211554 Reviewed-by: yoojin lee <yoojin7.lee@samsung.com> Reviewed-by: Mohammed Habibulla <moch@chromium.org> Reviewed-by: YongBeum Ha <ybha@samsung.com> Commit-Queue: YongBeum Ha <ybha@samsung.com> Tested-by: YongBeum Ha <ybha@samsung.com>
* winky : Fix the method to read full battery capacityYB.Ha2014-08-081-1/+3
| | | | | | | | | | | | | | | 'struct batt_params' has no member named 'full_capacity' BUG=chrome-os-partner:31146 TEST=emerge-winky chromeos-ec Check charging current by i2c register. Change-Id: Idaeb5fcd6c322c552793fc955e64d669c0b09fa4 Reviewed-on: https://chromium-review.googlesource.com/211561 Reviewed-by: yoojin lee <yoojin7.lee@samsung.com> Reviewed-by: Mohammed Habibulla <moch@chromium.org> Commit-Queue: yoojin lee <yoojin7.lee@samsung.com> Tested-by: yoojin lee <yoojin7.lee@samsung.com>
* Winky : Generate battery error if low voltage for more than 2 hoursYB.Ha2014-08-081-0/+9
| | | | | | | | | | | | | | | | | | | | Stop to charge and enter battery error state when system keeps low voltage for more than 2hours. Battery error state by this reason is cleared only once when battery was reconnected. BUG=chrome-os-partner:30951 TEST=emerge-winky chromeos-ec Check to stop and start charging by low voltage during 2hours. Change-Id: I0bf22c165d676b3d7637dd78c01db21b6d658874 Reviewed-on: https://chromium-review.googlesource.com/211124 Reviewed-by: Mohammed Habibulla <moch@chromium.org> Reviewed-by: yoojin lee <yoojin7.lee@samsung.com> Commit-Queue: yoojin lee <yoojin7.lee@samsung.com> Tested-by: yoojin lee <yoojin7.lee@samsung.com>
* winky : Change charging currentYB.Ha2014-08-081-0/+8
| | | | | | | | | | | | | | | | Charging current should be changed by FCC * 0.6 for battery safety and charging time. BUG=chrome-os-partner:31146 TEST=emerge-winky chromeos-ec Check charging current by i2c register. Change-Id: I56bc565934f5788e169a9d345fe180623cc27226 Reviewed-on: https://chromium-review.googlesource.com/211123 Reviewed-by: Mohammed Habibulla <moch@chromium.org> Reviewed-by: yoojin lee <yoojin7.lee@samsung.com> Tested-by: yoojin lee <yoojin7.lee@samsung.com> Commit-Queue: yoojin lee <yoojin7.lee@samsung.com>
* Winky : Charging start and stop by battery overtemperatureYB.Ha2014-08-081-1/+25
| | | | | | | | | | | | | | | | | | Charging start temperature : T<0 or T≥45 Charging stop temperature : T<0 or T≥60 Start condition of charge : 0≤T<45 BUG=chrome-os-partner:30951 TEST=emerge-winky chromeos-ec Check to stop and start charging by overtemperature. Change-Id: If73df8423c3d997598a49fcbc2926b290958c829 Reviewed-on: https://chromium-review.googlesource.com/211081 Reviewed-by: yoojin lee <yoojin7.lee@samsung.com> Reviewed-by: Mohammed Habibulla <moch@chromium.org> Commit-Queue: yoojin lee <yoojin7.lee@samsung.com> Tested-by: yoojin lee <yoojin7.lee@samsung.com>
* Winky : Check battery error by overvoltageYB.Ha2014-08-084-5/+53
| | | | | | | | | | | | | | | | | | | | | | Stop to charge and enter battery error state when battery pack voltage is higher than charging voltage. Battery error state by overvoltage is cleared only once when battery was reconnected. Battery error should be checked before translate battery flags. BUG=chrome-os-partner:30951 TEST=emerge-winky chromeos-ec Check battery error state by over voltage. Change-Id: I485d3be9f75bf32e0f2769401eeab8ec887f83ae Reviewed-on: https://chromium-review.googlesource.com/210016 Reviewed-by: yoojin lee <yoojin7.lee@samsung.com> Tested-by: yoojin lee <yoojin7.lee@samsung.com> Reviewed-by: Mohammed Habibulla <moch@chromium.org> Commit-Queue: yoojin lee <yoojin7.lee@samsung.com>
* Winky : Change temperature for stop discharging to meet spec.yoojin2014-08-051-2/+2
| | | | | | | | | | | | | | | | | | Winky system needs to change over-temperature conditions on discharging state to meet spec. Spec : T <= -20 or T >= 70 BUG=chrome-os-partner:31144 TEST=emerge-winky chromeos-ec Check to stop discharging by over temperature. Change-Id: I8372f99072bccafbbfab91c2873564c15c33189d Reviewed-on: https://chromium-review.googlesource.com/211067 Reviewed-by: YongBeum Ha <ybha@samsung.com> Tested-by: YongBeum Ha <ybha@samsung.com> Reviewed-by: Mohammed Habibulla <moch@chromium.org> Commit-Queue: YongBeum Ha <ybha@samsung.com>
* Winky : Change power sequence for RSMRST# on BYT-Myoojin2014-08-051-0/+1
| | | | | | | | | | | | | | | | | | | | | RSMRST# has to come 10us after the P1.0V is stable. Before, RSMRST# was high before P1.0V_AUX and P1.8V_AUX high. So, 1.1ms Delay was added on EC code. On this, RSMRST# is high after all SUS_Rails up. (P3.3V_AUX, P1.0V_AUX and P1.8V_AUX) BUG=chrome-os-partner:31116 TEST=emerge-winky chromeos-ec Measure signal waveforms in power up sequence. Change-Id: I55af36a6f4f2e7ea44ddf6b576df54f55cd3c8b0 Reviewed-on: https://chromium-review.googlesource.com/210954 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: YongBeum Ha <ybha@samsung.com> Tested-by: YongBeum Ha <ybha@samsung.com> Commit-Queue: YongBeum Ha <ybha@samsung.com>
* Winky : Change power sequence for Core well stable on BYT-Myoojin2014-08-051-3/+3
| | | | | | | | | | | | | | | | | | | Winky included PCIe device. Intel BYT-M spec. : Core well stable to DRAM_CORE_PWROK and PMC_CORE_PWROK assertion for power rails needed by PCIe devices is minimum 99ms. BUG=chrome-os-partner:31116 TEST=emerge-winky chromeos-ec Measure signal waveforms in power up sequence. Change-Id: I2afde9f1216b360c926c254f98d64124d2dbf080 Reviewed-on: https://chromium-review.googlesource.com/210952 Reviewed-by: YongBeum Ha <ybha@samsung.com> Tested-by: YongBeum Ha <ybha@samsung.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: YongBeum Ha <ybha@samsung.com>
* Cloned from Rambi to Cranky with only string changesRoger Smith2014-07-318-0/+652
| | | | | | | | | | | | | | BUG=None TEST=Compiled BRANCH=rambi-5216.B Signed-off-by: Roger Smith <rogers@ami.com> Change-Id: I96554f67f23c528bfda50bfcd599521e9d51d809 Reviewed-on: https://chromium-review.googlesource.com/210482 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Roger Smith <rogers@ami.com> Commit-Queue: Roger Smith <rogers@ami.com> Tested-by: Roger Smith <rogers@ami.com>
* Winky : Check battery responsive during 3minyoojin2014-07-313-1/+13
| | | | | | | | | | | | | | | | | | | | | | It's too short to check battery responsive during 30sec to winky system. Samsung spec is 3min to check i2c communication is failed. So, EC checks i2c communication during setting time when battery is inserted. BUG=chrome-os-partner:30951 TEST=emerge-winky chromeos-ec Check battery responsive with defect battery. Change-Id: Id37aa5bc6d8faef330fed2f65aeb76f6df7e66f4 Reviewed-on: https://chromium-review.googlesource.com/210018 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Mohammed Habibulla <moch@chromium.org> Reviewed-by: yoojin lee <yoojin7.lee@samsung.com> Commit-Queue: yoojin lee <yoojin7.lee@samsung.com> Tested-by: yoojin lee <yoojin7.lee@samsung.com>
* Winky : Update charge voltage for NVDC to meet spec.yoojin2014-07-303-0/+13
| | | | | | | | | | | | | | | | | | | | Set the charge voltage(0x15) in non-charging state. When EC set charge voltage below 4096mA, charge voltage of charger was actually 9008mA(POR). POR can not ensure battery stability. BUG=chrome-os-partner:30194 TEST=emerge-winky chromeos-ec Check charger values was set normally by read i2c. To check the battery can be charging normally. Change-Id: Ib90bc91bad7f726b893056c9c705415f51001e00 Reviewed-on: https://chromium-review.googlesource.com/206449 Reviewed-by: YongBeum Ha <ybha@samsung.com> Tested-by: YongBeum Ha <ybha@samsung.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: YongBeum Ha <ybha@samsung.com>
* winky : Add to retry i2c by fail i2c communication.yoojin2014-07-243-2/+24
| | | | | | | | | | | | | | | | | | | | | | When battery was charging, battery current sometimes set to 256mA by fail i2c communication. So, EC should check i2c communication fail a few more times. When EC checks continual i2c fail 3 times, abnormal current was not occured. BUG=chrome-os-partner:30242 TEST=emerge-winky chromeos-ec Check battery current when battery was charging. Change-Id: Ibcff8b461a3cf0f547b2e1f7e85b7121a0fd543d Reviewed-on: https://chromium-review.googlesource.com/208921 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: yoojin lee <yoojin7.lee@samsung.com> Commit-Queue: yoojin lee <yoojin7.lee@samsung.com> Tested-by: yoojin lee <yoojin7.lee@samsung.com> Reviewed-by: YongBeum Ha <ybha@samsung.com> Tested-by: YongBeum Ha <ybha@samsung.com>
* Winky : Notify host about removed batteryyoojin2014-07-231-0/+8
| | | | | | | | | | | | | | | | | | | | | When battery was removed, battery tray icon did not change as removed battery. It just kept charging-icon. So, when battery is removed, battery present & charge & discharge flag should be clear and notified host. BUG=chrome-os-partner:30608 TEST=emerge-winky chromeos-ec Check battery tray icon when battery was removed. Change-Id: I0114839e8814194b82e11feedacf1008c22bc6f1 Reviewed-on: https://chromium-review.googlesource.com/208301 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Mohammed Habibulla <moch@chromium.org> Reviewed-by: YongBeum Ha <ybha@samsung.com> Commit-Queue: YongBeum Ha <ybha@samsung.com> Tested-by: YongBeum Ha <ybha@samsung.com>
* Winky : Update battery information to meet specyoojin2014-07-231-4/+4
| | | | | | | | | | | | | | BUG=chrome-os-partner:30194 TEST=emerge-winky chromeos-ec To check the battery can be charging normally. Change-Id: I46ee684deb52f25665aa27ffa26e3f1551b71d1a Reviewed-on: https://chromium-review.googlesource.com/209490 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Mohammed Habibulla <moch@chromium.org> Reviewed-by: YongBeum Ha <ybha@samsung.com> Commit-Queue: YongBeum Ha <ybha@samsung.com> Tested-by: YongBeum Ha <ybha@samsung.com>
* winky : Update input current to meet spec.yoojin2014-07-221-1/+1
| | | | | | | | | | | | | | | BUG=chrome-os-partner:30194 TEST=emerge-winky chromeos-ec Check input current was set normally. To check the battery can be charging normally. Change-Id: I24a622cdb71f1c18ad3985db43ccd5566ce4801f Reviewed-on: https://chromium-review.googlesource.com/208924 Reviewed-by: YongBeum Ha <ybha@samsung.com> Tested-by: YongBeum Ha <ybha@samsung.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Mohammed Habibulla <moch@chromium.org> Commit-Queue: YongBeum Ha <ybha@samsung.com>
* BayTrail: Add support for battery cutoff at-shutdownDave Parker2014-07-154-60/+146
| | | | | | | | | | | | | | | | | | | | | | | | | | This change brings over support from ToT for the 'at-shutdown' option to "ectool batterycutoff" A board wishing to use the common command should define: CONFIG_BATTERY_CUT_OFF in its board.h, implement "int board_cut_off_battery(void)" and remove any other EC_CMD_BATTERY_CUT_OFF command handlers. BUG=chrome-os-partner:28190 BRANCH=None TEST=Run the following commands and verify on the serial console that the battery is cut off at the appropriate time. Console: cutoff cutoff at-shutdown ectool (from both ToT and Rambi branch) ectool batterycutoff ectool batterycutoff at-shutdown Change-Id: I9071b0250181af5a31ff2eea71f9a142df0470d3 Signed-off-by: Dave Parker <dparker@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/207982 Reviewed-by: Vic Yang <victoryang@chromium.org>
* winky : 3 Color LEDyoojin2014-07-143-2/+130
| | | | | | | | | | | | | | | | | | | | | | | | 3 Color LED for samsung spec. * Scenario - BLUE : System on - GREEN : System off and Battery full-charged - RED : System off and Battery charging * EC only controlled green & red LED. Blue LED was controlled by HW. So, when system on, EC sould turn off green & red LED. BUG=chrome-os-partner:30089 TEST=emerge-winky chromeos-ec Check LED status as 3color LED scenario. Change-Id: Icc2375c2dd3bbbbbe73c23eb8972e9c2049e648d Reviewed-on: https://chromium-review.googlesource.com/205934 Reviewed-by: YongBeum Ha <ybha@samsung.com> Tested-by: YongBeum Ha <ybha@samsung.com> Reviewed-by: Mohammed Habibulla <moch@chromium.org> Commit-Queue: YongBeum Ha <ybha@samsung.com>
* winky : Enable battery detectyoojin2014-07-122-0/+3
| | | | | | | | | | | | | | | | | | Enable to detect battery as GPIO. And BAT_DETECT was moved to PB4 from PV1 BD'. BUG=chrome-os-partner:25417 TEST=emerge-winky chromeos-ec Check battery error when battery was removed. Change-Id: Idfe1bb955248a8515f3618d67ac08f9d973190b1 Reviewed-on: https://chromium-review.googlesource.com/206441 Reviewed-by: YongBeum Ha <ybha@samsung.com> Tested-by: YongBeum Ha <ybha@samsung.com> Reviewed-by: yoojin lee <yoojin7.lee@samsung.com> Tested-by: yoojin lee <yoojin7.lee@samsung.com> Reviewed-by: Mohammed Habibulla <moch@chromium.org> Commit-Queue: YongBeum Ha <ybha@samsung.com>
* Gnawty: Change battery LED to flash orange when battery lowJimmy Lin2014-07-102-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | BUG=chrome-os-partner:29937 BRANCH=gnawty TEST=manual Low Battery Case: To config Battery LED blinks orange during low Battery(=<13%), Check battery LED show amber directly when plugging in adpater. Critical Battery Case: To config Battery LED blinks orange during Critical Battery(=<7%), Check battery LED show amber directly when plugging in adpater. Battery full Case: To config Battery LED blinks full during Battery near full(=>95%), Check battery LED show blue directly when plugging in adpater. Change-Id: I6bcb205c48508b05f460d87511c85d3dec002dd5 Signed-off-by: Jimmy Lin <jimmy.Lin@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/207304 Reviewed-by: Dave Parker <dparker@chromium.org> Commit-Queue: Dave Parker <dparker@chromium.org> Tested-by: Dave Parker <dparker@chromium.org>
* Turn battery level thresholds into CONFIG optionsJimmy Lin2014-07-103-15/+33
| | | | | | | | | | | | | | | | | | | | | | | | Allow boards to set the almost_full, low, critical, and shutdown battery levels as CONFIG options. BUG=None BRANCH=tot,gnawty TEST=manual Add: CONFIG_BATTERY_LEVEL_NEAR_FULL CONFIG_BATTERY_LEVEL_LOW CONFIG_BATTERY_LEVEL_CRITICAL CONFIG_BATTERY_LEVEL_SHUTDOWN values in a board.h and verify notifications are sent to the host at the modified value. Change-Id: Ia4df2fb3f23602e5b84ec0d9d62ebbd3e218c7a6 Signed-off-by: Jimmy Lin <jimmy.Lin@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/207101 Reviewed-by: Dave Parker <dparker@chromium.org> Commit-Queue: Dave Parker <dparker@chromium.org> Tested-by: Dave Parker <dparker@chromium.org>
* Swanky: Supports Power LED blinking in S3 mode.Aaron Weng2014-07-081-3/+35
| | | | | | | | | | | | | | | | | | To implement the power led blinks in S3 mode when lid is open. BUG=chrome-os-partner:30107 BRANCH=rambi TEST=make buildall -j and check the power led behavior is correct on S3 and S0/S5 mode. Signed-off-by: Aaron Weng <aaron.weng@quantatw.com> Change-Id: I3a7a6d6e7e9cd11d2ecd352945c5f0f64bdbb048 Reviewed-on: https://chromium-review.googlesource.com/206084 Commit-Queue: Aaron Weng <aaron.weng@quantatw.com> Tested-by: Aaron Weng <aaron.weng@quantatw.com> Reviewed-by: Dave Parker <dparker@chromium.org>
* winky : Disabled kbd's column 2 invert to fix non-working kbd.yoojin2014-07-081-1/+0
| | | | | | | | | | | | | | | | | | | | | | KBD didn't work partly because holeless reset ic was changed. KBD's Column 2 line was inverted. So, KBD's Column 2 invert should be disable. BUG=chrome-os-partner:30086 TEST=emerge-winky chromeos-ec Check to wake up system by power button. Check function key on S0. Change-Id: I0e125362512361c5c908c74a0b139a40d018b104 Reviewed-on: https://chromium-review.googlesource.com/205913 Reviewed-by: YongBeum Ha <ybha@samsung.com> Tested-by: YongBeum Ha <ybha@samsung.com> Reviewed-by: Mohammed Habibulla <moch@chromium.org> Reviewed-by: yoojin lee <yoojin7.lee@samsung.com> Tested-by: yoojin lee <yoojin7.lee@samsung.com> Reviewed-by: Vincent Palatin <vpalatin@chromium.org> Commit-Queue: YongBeum Ha <ybha@samsung.com>
* winky : Skip to check temperature by diassert PWROKyoojin2014-07-081-0/+1
| | | | | | | | | | | | | | | | | | | | EC reset by i2c fail. EC should ignore to check temperature when PWROK was diasserted and thermal sensor was off BUG=chrome-os-partner:29907 TEST=emerge-winky chromeos-ec Check system boot on winky and temperature on S0. Change-Id: I52cab9470b1b82ea257020f95f62cc67099788f1 Reviewed-on: https://chromium-review.googlesource.com/205902 Reviewed-by: YongBeum Ha <ybha@samsung.com> Reviewed-by: yoojin lee <yoojin7.lee@samsung.com> Tested-by: YongBeum Ha <ybha@samsung.com> Reviewed-by: Randall Spangler <rspangler@chromium.org> Reviewed-by: Mohammed Habibulla <moch@chromium.org> Commit-Queue: yoojin lee <yoojin7.lee@samsung.com> Tested-by: yoojin lee <yoojin7.lee@samsung.com>
* BayTrail: Set the default USB charge mode to CDPDave Parker2014-07-0712-0/+12
| | | | | | | | | | | | | | | | This reflects the reality of what we have been doing already. The earlier default mode of SDP2 was actually CDP due to an inversion in the ILIM control line. BUG=chrome-os-partner:29053 BRANCH=None TEST=Boot a baytrail board and verify that the 'usbchargemode' command indicates CDP charging. Change-Id: Ia061d45512d1f90c68fd02b3197c414961b78a7c Signed-off-by: Dave Parker <dparker@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/205813 Reviewed-by: Randall Spangler <rspangler@chromium.org>
* USB Power: Add config option to set default charge modeDave Parker2014-07-072-2/+12
| | | | | | | | | | | | | BUG=chrome-os-partner:29053 BRANCH=ToT TEST=Set a default change mode other than SDP2 in a board config. Verify the 'usbchargemode' console command indicates the ports are operating in that mode. Signed-off-by: Dave Parker <dparker@chromium.org> Change-Id: I4a65d8b6ad14ff3d1f12b644960bbf401027f8df Reviewed-on: https://chromium-review.googlesource.com/205812 Reviewed-by: Vic Yang <victoryang@chromium.org>
* USB Power: Invert ILIM control line with 'smart simple' chargingDave Parker2014-07-071-3/+3
| | | | | | | | | | | | | | | | | The ILIM control line is inverted before reaching the USB charge controllers when they are cross-connected to allow only one port to deliver the HIGH current limit at a time. BUG=chrome-os-partner:29053 BRANCH=ToT TEST=Verify, with a multimeter, that ILIM (pin 4) on a TPS2546 is 3.3V when the chargemode is set to CDP Change-Id: Idd89dcfc117f1f3393ded1887e8d1cb27ba367ad Signed-off-by: Dave Parker <dparker@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/205811 Reviewed-by: Vic Yang <victoryang@chromium.org> Reviewed-by: Randall Spangler <rspangler@chromium.org>
* Tiny: Remove keyscan taskDave Parker2014-06-271-2/+1
| | | | | | | | | | | | | | The keyscan task is not needed on Tiny. BUG=chrome-os-partner:29504 BRANCH=None TEST=Verify power button works correctly and keyscan task isn't listed under 'taskinfo'. Change-Id: I34e8782aa4aeffe700c914826287ff1dfefcd186 Signed-off-by: Dave Parker <dparker@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/203104 Reviewed-by: Randall Spangler <rspangler@chromium.org>
* Config: Allow keyproto task to run without keyscan definedDave Parker2014-06-261-5/+0
| | | | | | | | | | | | | | | Allow devices to send power button keyboard events without having an internal keyboard defined. BUG=chrome-os-partner:29504 BRANCH=None TEST=Build and run on a peppy. Verify keyboard protocol messages are still sent for the power button using evtest. Change-Id: Ibfaa1a779552bdc5a643911703e7900bbc1d51d7 Signed-off-by: Dave Parker <dparker@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/203103 Reviewed-by: Randall Spangler <rspangler@chromium.org>
* Rambi: Increase adapter input current limit to 1894mADave Parker2014-06-201-1/+1
| | | | | | | | | | | | | | | | | This sets the adapter current limit to 90% of the rating for a 40W adapter. The earlier limit was based on a 33W adapter which was not used. BUG=chrome-os-partner:23833 BRANCH=ToT TEST=With a 20-80% charged battery run 4000 fish (search for WebGl Aquarium) with backlight at 100%. Verify ChargerCurrent is around the limit with 'adc' command on EC serial console. Change-Id: I6279d0a3502142348b79425e56cfc25bf75432b5 Signed-off-by: Dave Parker <dparker@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/204893 Reviewed-by: Todd Broch <tbroch@chromium.org>
* Expresso: Increase adapter input current limit to 1894mADave Parker2014-06-201-1/+1
| | | | | | | | | | | | | | | | | This sets the adapter current limit to 90% of the rating for a 40W adapter. The earlier limit was based on a 33W adapter which was not used. BUG=chrome-os-partner:23833 BRANCH=None TEST=With a 20-80% charged battery run 4000 fish (search for WebGl Aquarium) with backlight at 100%. Verify ChargerCurrent is around the limit with 'adc' command on EC serial console. Change-Id: I4e2270dd1cb774681383105d88869dc7022a9fb7 Signed-off-by: Dave Parker <dparker@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/204932 Reviewed-by: Todd Broch <tbroch@chromium.org>
* Kip: Modify battery LED behavior.Devin Lu2014-06-171-6/+9
| | | | | | | | | | | | | | | | | | | | | | | We won't to see the corner case when plugging in adpater. if battery want to charge, we want to see the amber led directly when plugging in adapter, not white to amber. if battery into fully charged, we want to see the white led directly when plugging in adapter, not amber to white. BUG=None BRANCH=rambi TEST=manual Check battery LED show amber directly when plugging in adpater, if battery needs to charge. Check battery LED show white directly when plugging in adpater, if battery into fully charged. Check battery LED show white directly when plugging in adpater, if battery near full. Change-Id: I08e6c9ea32dc90599a974d7b5fadaf59f549cc77 Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-by: Dave Parker <dparker@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/203932
* Enguarde: Enable PWM module in deep sleepDave Parker2014-06-141-0/+1
| | | | | | | | | | | | | | | This prevents erratic blinking of the charging LED while in G3. BUG=chrome-os-partner:29577 BRANCH=enguarde TEST=Shutdown machine and type 'dsleep 0' in the serial console to force deep sleep mode. Verify the charging LED doesn't flash erratically. Change-Id: Ibc6af84f9f35e4ba3893269d9a306e4b5e99f70a Signed-off-by: Dave Parker <dparker@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/203850
* Expresso: Enable PWM module in deep sleepDave Parker2014-06-141-0/+1
| | | | | | | | | | | | | | | This prevents erratic blinking of the charging LED while in G3. BUG=chrome-os-partner:29577 BRANCH=expresso TEST=Shutdown machine and type 'dsleep 0' in the serial console to force deep sleep mode. Verify the charging LED doesn't flash erratically. Change-Id: I4912cde058f54266a2701155d08817f648bc72de Signed-off-by: Dave Parker <dparker@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/203802
View Lorry Controller Status