summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
...
* npcx: Use compatible MPU configShawn Nematbakhsh2017-11-142-48/+7
* cortex-m: mpu: Support unaligned regions and protect code RAMShawn Nematbakhsh2017-11-144-60/+149
* nautilus: Change USB_C{0,1}_PD_RST_L to be GPIO_ODR_HIGHFurquan Shaikh2017-11-141-2/+2
* poppy/soraka: Change USB_C1_PD_RST_L to be GPIO_ODR_HIGHFurquan Shaikh2017-11-141-1/+1
* usb_updater2: Add support for touchpad debugging featureNicolas Boichat2017-11-141-16/+61
* usb_update: Add support for touchpad debugging featureNicolas Boichat2017-11-143-0/+50
* rainier: add rainier support for flash_ecEge Mihmanli2017-11-141-0/+1
* zoombini: Set default input ILIM to 128 mA.Aseda Aboagye2017-11-141-1/+1
* isl9238: Don't reread PROG pin or reload ILIM.Aseda Aboagye2017-11-142-0/+24
* isl923x: Change charger_post_init().Aseda Aboagye2017-11-141-28/+41
* isl9238: Raise min input voltage limit.Aseda Aboagye2017-11-132-1/+15
* Fizz: Switch power source to BJ at G3/S5Daisuke Nojiri2017-11-134-8/+45
* pi3usb9281: sync USB switch hardware control with switch stateRong Chang2017-11-131-0/+3
* coral: Change GPIO_USB_C1_PD_RST_ODL to be ODR_HIGHScott Collyer2017-11-111-1/+1
* ectool: Print temperature unit in ectool temps outputNicolas Boichat2017-11-111-2/+2
* keyboard_mkbp: Fix FIFO lockingShawn Nematbakhsh2017-11-101-7/+33
* glkrvp: Allow system to boot using DC JackVijay Hiremath2017-11-104-19/+103
* nds32: use coreboot-sdk as the default toolchain for local buildDino Li2017-11-101-1/+4
* npcx: fixed the assembly code of deep idle bypassCHLin2017-11-092-9/+6
* poppy/soraka: set attenuation_factor of opt3001 to 1.Marco Chen2017-11-091-2/+6
* sweetberry: save to specified directoryMengqi Guo2017-11-092-46/+105
* gru: Remove `flashinfo` command for RAM savingsShawn Nematbakhsh2017-11-093-0/+4
* it83xx: pwm: support PWM_CONFIG_DSLEEP config flagDino Li2017-11-093-7/+23
* charger: Prevent SET access to EC_CMD_CHARGE_STATE on locked systemsShawn Nematbakhsh2017-11-091-3/+3
* cleanup: Remove llama boardShawn Nematbakhsh2017-11-099-503/+0
* board: Add support for whiskers boardNicolas Boichat2017-11-094-10/+51
* rainier: initial mainboardEge Mihmanli2017-11-096-0/+1196
* Coral: Fix LED name for factory control led by ectooldavid.huang2017-11-091-5/+5
* Enable it83xx based boardsPatrick Georgi2017-11-091-1/+1
* cleanup: Remove HOOK_INIT task synchronizationShawn Nematbakhsh2017-11-093-45/+0
* it83xx: Make it build with coreboot-sdkPatrick Georgi2017-11-082-4/+0
* Fizz: Blink LED faster when requesting more powerDaisuke Nojiri2017-11-081-1/+1
* g: handle delayed processing of the 'wake' pulsesVadim Bendebury2017-11-081-2/+38
* g: sps: at initialization wait for the master to finish SPI cycleVadim Bendebury2017-11-081-0/+14
* g: sps do not invoke rx_handler unless data was receivedVadim Bendebury2017-11-081-4/+7
* coral: Ensure battery report timer can be restartedScott Collyer2017-11-071-0/+9
* cr50: fix event definition collisionVadim Bendebury2017-11-072-4/+11
* tpm: provide means of shutting down comms layer while in resetVadim Bendebury2017-11-076-17/+50
* bd9995x: Leave USB data switches closed on PD power swapShawn Nematbakhsh2017-11-072-35/+56
* fizz: Enable charge_manager safe mode and never leave itShawn Nematbakhsh2017-11-072-1/+10
* Mark reset and panic functions as noreturnPatrick Georgi2017-11-077-4/+11
* pd: Add pd_capable() to check PD capability of partner portShawn Nematbakhsh2017-11-072-4/+16
* bd9995x: Use fixed PD-port-to-VBUS/VCC mappingShawn Nematbakhsh2017-11-0715-113/+43
* flash_ec: Set NEED_SERVO according to chip name instead of board nameWai-Hong Tam2017-11-061-2/+4
* Fizz: Modify thermal tableRyan Zhang2017-11-068-33/+171
* servo_v4: remove gpio endpoint.Nick Sanders2017-11-042-58/+4
* kahlee: Don't hold pwrbtn=LOW in G3Edward Hill2017-11-031-1/+1
* coral: Increase port80 buffer sizeScott Collyer2017-11-031-0/+4
* nautilus: Enable CONFIG_BATTERY_HW_PRESENT_CUSTOMFurquan Shaikh2017-11-031-0/+1
* poppy: Enable CONFIG_BATTERY_HW_PRESENT_CUSTOMFurquan Shaikh2017-11-031-0/+1