summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* puff: Determine BJ power based on fw config.Sam McNally2020-05-142-13/+34
* volteer: Enable EFS2Daisuke Nojiri2020-05-141-0/+2
* VCONN: Request Vconn swap if power state transitions above G3madhusudanarao amara2020-05-141-0/+6
* endeavour: add pse initJeff Chase2020-05-144-2/+184
* risc-v: add comments about not needing 16-byte stack frame alignmentDino Li2020-05-133-7/+48
* test: Add rollback unit testTom Hughes2020-05-137-0/+135
* tcpmv2: hard reset AutoDischarge enable only when neededDenis Brockus2020-05-121-3/+6
* tcpmv2: Add AutoDischarge for CT connectionsDenis Brockus2020-05-121-0/+3
* Zork: Use FW_CONFIG for IOEX_HDMI_CONN_HPD_3V3_DB.Edward Hill2020-05-129-3/+48
* Zork: Use FW_CONFIG for IOEX_MST_HPD_OUT.Edward Hill2020-05-128-33/+129
* asurada: keep vbat voltage when not chargingTing Shen2020-05-121-1/+2
* asurada: enable battery cut-offTing Shen2020-05-122-2/+3
* asurada: set uart_rx gpio to hi-zTing Shen2020-05-121-2/+2
* ppc/sn5s330: set the deglitch time to 1000 us for PP2James_Chao2020-05-121-4/+8
* usb_pd_alt_mode_dfp: Move pd_set_svids_discoveryAbe Levkoy2020-05-121-9/+8
* TCPMv2: Discover cable plug modesAbe Levkoy2020-05-121-0/+6
* TCPMv2: Discover cable plug SVIDsAbe Levkoy2020-05-121-0/+10
* TCPMv2: Implement mode discovery for port partnerAbe Levkoy2020-05-123-10/+266
* strago: Disable Vivaldi keyboardAbe Levkoy2020-05-121-0/+1
* TCPMv2: Use CMD_DISCOVER_IDENT during discoveryAbe Levkoy2020-05-121-4/+4
* TCPMv2: Add new state for SVID discovery flowAbe Levkoy2020-05-121-1/+120
* TCPMv2: Define fields for SVID discovery stateAbe Levkoy2020-05-126-83/+172
* hatch: Remove the board keyscan_config definition and use the defaultWai-Hong Tam2020-05-1114-34/+0
* keyboard_scan: Update the default scan delay to compensate H1 signal delayWai-Hong Tam2020-05-111-0/+11
* util: Remove unnecessary halt in gdbinitTom Hughes2020-05-111-2/+0
* ec: fix `make coverage` code coverage reportingPaul Fagerburg2020-05-115-12/+40
* tcpmv2: warm start DBG_ACC_SNK correctlyDenis Brockus2020-05-112-3/+25
* asurada: detect subboard typeEric Yilun Lin2020-05-113-3/+60
* asurada: configure hibernate wake source.Eric Yilun Lin2020-05-112-7/+9
* damu: fix battery cutoffScott Chao2020-05-111-1/+1
* casta: Configure number of PD ports basing on SKU IDPatryk Duda2020-05-111-0/+21
* damu: modify lid accel to LIS2DWLScott Chao2020-05-112-9/+9
* cometlake-discrete: create a S0->S3 fast pathPeter Marheine2020-05-114-13/+66
* SM5803: Enable interrupts after setting thresholdsDiana Z2020-05-101-4/+6
* volteer: set H1 packet mode GPIO lowKeith Short2020-05-095-12/+9
* TCPMv2: Guard all VCONN function with CONFIG_USBC_VCONN macroSam Hurst2020-05-093-19/+45
* cleanup: rename kpbs to kbps for i2cJett Rink2020-05-092-3/+3
* uart_stress_tester: import logging instead of cros_loggingNamyoon Woo2020-05-081-1/+1
* tcpmv2: get USB CCD working on servo_v4 with trembyleDenis Brockus2020-05-087-38/+86
* servo_updater: Re-add board name's to servo_updaterBrian J. Nemec2020-05-081-1/+5
* mt8192: add MediaTek MT8192 power sequencing supportEric Yilun Lin2020-05-087-15/+503
* power: add power_wait_mask_signals_timeout()Eric Yilun Lin2020-05-082-4/+24
* zork: enable tcpci_dump console commandDenis Brockus2020-05-081-0/+1
* Add CONFIG_CMD_FPSENSOR_DEBUG to config.hDaisuke Nojiri2020-05-081-0/+1
* Rename CONFIG_ macros to CONF_*Daisuke Nojiri2020-05-081-22/+22
* Remove unused CONFIG macrosDaisuke Nojiri2020-05-083-3/+0
* PD: Skip pd_prepare_sysjump if PD tasks haven't startedDaisuke Nojiri2020-05-081-2/+6
* servo_v4: Add console commands to override the HPD pass-throughWai-Hong Tam2020-05-084-13/+68
* servo_v4: Introduce console commands to config DP alt-modeWai-Hong Tam2020-05-082-40/+144
* Mushu : correct battery parameter config.loganliao2020-05-082-20/+19
View Lorry Controller Status