summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* ectool: add servo v2 spi supportVincent Palatin2018-01-176-2/+373
* power/rk3399: Change power-off sequence for KD panelPhilip Chen2018-01-161-1/+1
* glkrvp: Enable eSPI instead of LPC including eSPI VW based SCI/SMIShamile Khan2018-01-163-3/+9
* power: introducing pwr_avg console commandRuben Rodriguez Buchillon2018-01-166-0/+85
* grunt: Enable TCPC + PPC interrupts and overcurrent GPIOsEdward Hill2018-01-162-3/+23
* grunt: Set source current limit to enable 3A outputEdward Hill2018-01-161-4/+8
* grunt: Don't return error when disabling all charge portsEdward Hill2018-01-161-8/+4
* nautilus: support BC1.2 on USB Type-A portYB.Ha2018-01-153-2/+21
* wand: Enable CONFIG_CHARGE_RAMP_HWNicolas Boichat2018-01-141-0/+2
* battery: Add support for reading base battery through host commandNicolas Boichat2018-01-142-12/+163
* grunt: Fix ENABLE_BACKLIGHT to be active lowEdward Hill2018-01-144-5/+29
* grunt: Enable BMI160 gyro interruptsEdward Hill2018-01-142-1/+8
* grunt: Add CONFIG_VBOOT_HASHEdward Hill2018-01-141-7/+4
* rainier: final fix for accel orientation.Ege Mihmanli2018-01-121-2/+2
* meowth: zoombini: Check for battery disconnect.Aseda Aboagye2018-01-122-0/+46
* grunt: Add I2C support for the BMI160Simon Glass2018-01-121-0/+2
* grunt: Enable the CPU temperature sensorSimon Glass2018-01-122-0/+6
* grunt: rename volume GPIOsEdward Hill2018-01-122-4/+2
* meowth_fp: enable the hostcmd interfaceVincent Palatin2018-01-124-2/+6
* stm32: add SPI slave support for STM32H7Vincent Palatin2018-01-122-11/+51
* gsctool: add options to control ccdVadim Bendebury2018-01-121-10/+133
* ccd: add distinct return code to indicate that password is requiredVadim Bendebury2018-01-122-2/+3
* gsctool: allow password handling function to run on different subcommandsVadim Bendebury2018-01-121-6/+15
* ccd: use async TPM reset where requiredVadim Bendebury2018-01-121-7/+27
* ccd: 'pp polling' vendor command optionVadim Bendebury2018-01-122-0/+78
* ccd: do not allow 'unlock' from console unless password is setVadim Bendebury2018-01-121-1/+6
* ccd: add 'in progress' return valueVadim Bendebury2018-01-122-7/+14
* pp: add API to show when press is expectedVadim Bendebury2018-01-122-0/+26
* pp: split fsm state in twoVadim Bendebury2018-01-121-5/+14
* ccd: refactor to allow clear indication of CCD command being in progressVadim Bendebury2018-01-121-1/+13
* Nami: Update WiFi pin defineElmo_Lan2018-01-111-1/+1
* board: rainier: fix accel orientationEge Mihmanli2018-01-111-2/+2
* cr50: pass essential ccd commands through tpm task contextVadim Bendebury2018-01-113-71/+150
* config.h: Define CONFIG_EC_EC_COMM_BATTERY_MASTER/SLAVENicolas Boichat2018-01-113-8/+14
* grunt: Lowering I2C bus speed to 400kHz for TCPC chipsJett Rink2018-01-111-2/+2
* power: Fix interrupt enable in siglog_deferredEdward Hill2018-01-111-1/+1
* nautilus: bug fix in sensor index.Jongpil Jung2018-01-102-123/+123
* chip/host: uart: Run uart_monitor_stdin() before task schedulingShawn Nematbakhsh2018-01-101-0/+12
* cr50: Don't touch EC reset for USB-EC SPI bridge.Aseda Aboagye2018-01-101-7/+18
* ec_chip_mchp: Add chip flash image generatorScott Worley2018-01-101-0/+481
* nautilus: Implement workaround for broken reset flagsFurquan Shaikh2018-01-101-0/+12
* cr50: enable deep sleep on BobMary Ruthven2018-01-101-2/+1
* cr50: configure sys_rst_l as wake on high before deep sleepMary Ruthven2018-01-101-21/+13
* ccd: Refactor routing CCD commands through TPM taskVadim Bendebury2018-01-101-17/+32
* ccd: prepare for handling crucial CCD commands through TPM task contextVadim Bendebury2018-01-104-25/+96
* stm32mon: do not write trailing empty spaceVincent Palatin2018-01-101-0/+6
* stm32mon: add STM32H7 identifierVincent Palatin2018-01-101-0/+1
* stm32mon: change erase timeoutVincent Palatin2018-01-101-3/+12
* lux: Add lux boardNicolas Boichat2018-01-108-9/+86
* EFS: Add SIG_RW_B in fmapDaisuke Nojiri2018-01-101-1/+16