summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* TDP142: Initial driverDiana Z2021-05-256-0/+100
* mancomb: Add CBI utility functionsRob Barnes2021-05-253-1/+104
* TCPMv2: Clear pending DPMs during port discovery requestDiana Z2021-05-251-1/+3
* chip/npcx/espi: Remove errata 2.22 for NPCX7+Raul E Rangel2021-05-251-0/+10
* chip/npcx/espi: Fix race condition between PLTRST# and PCHANENRaul E Rangel2021-05-251-3/+3
* usb_port_power_dumb: allow board to customize hooksTing Shen2021-05-254-1/+22
* dedede: Update cbi_fw_configTommy Chung2021-05-251-1/+4
* zephyr: npcx: Fix non-psl hibernateDawid Niedzwiecki2021-05-251-2/+11
* zephyr: hayato: Enable config to support keyboard scanRuibin Chang2021-05-255-4/+39
* Kakadu: add the support for ICM42607wen zhang2021-05-253-2/+103
* flash_fp_mcu: Add defaults for image file argCraig Hesling2021-05-251-7/+38
* guybrush: Only enable fan PWM in S0Rob Barnes2021-05-241-1/+1
* guybrush: Disable SOC_TEMP for board_version > 1Rob Barnes2021-05-243-8/+22
* brya: Skip mp2964 tuning on expected AP global resetCaveh Jalali2021-05-241-0/+6
* lindar: modify PD_MAX_POWER_MW to 45W.arthur.lin2021-05-241-1/+1
* brya: board ID 2: Move RT_RST to different pinCaveh Jalali2021-05-222-12/+16
* qcom: Deprecate QSIP_ON, a load switch enableWai-Hong Tam2021-05-221-9/+0
* dooly: fix lux overflowZick Wei2021-05-211-19/+25
* nucleo-h743zi: Check if AP is on when processing HOOK_INIT hooksPatryk Duda2021-05-211-2/+7
* nucleo-f412zg: Check if AP is on when processing HOOK_INIT hooksPatryk Duda2021-05-211-2/+7
* nucleo-dartmonkey: Check if AP is on when processing HOOK_INIT hooksPatryk Duda2021-05-211-2/+7
* brya: Enable CONFIG_LOW_POWER_IDLESooraj Govindan2021-05-211-0/+1
* brya: Move battery_hw_present to boardCaveh Jalali2021-05-212-6/+8
* brya: Add lid_open interrupt annotationCaveh Jalali2021-05-211-1/+1
* guybrush: Add CBI utility functionsRob Barnes2021-05-214-15/+105
* Cherry: change gyro snesor to ICM-42607-PSue Chen2021-05-214-21/+34
* Cherry: Add battery informationSue Chen2021-05-212-13/+70
* icm42607: Fix build code errorSue Chen2021-05-211-6/+4
* cherry: Add temp sensor for chargerSue Chen2021-05-214-1/+22
* USBC: Disallow Try.SRC when not togglingDiana Z2021-05-211-2/+2
* zephyr: add clock to support it8xxx2 cros_kb_row driverRuibin Chang2021-05-213-0/+82
* Homestar:Battery:Modify battery parameters for SMP and Sunwodatongjian2021-05-211-4/+4
* TCPMv2: Seed the charge manger in Attached.SRCstabilize-13983.B-mainWai-Hong Tam2021-05-201-0/+4
* zephyr: asurada: remove BRINGUP modeDenis Brockus2021-05-201-1/+0
* brya: signal MKBP via host events instead of GPIOBoris Mittelberg2021-05-201-1/+1
* Genesis: Fix LED behavior at initSue Chen2021-05-201-0/+7
* Genesis: LED PWM channels' IO type change to push-pullSue Chen2021-05-201-4/+2
* zephyr: drivers: add thermistor test suiteTomasz Michalec2021-05-205-1/+565
* thermistor: update Steinhart-Hart equationsTomasz Michalec2021-05-201-37/+37
* adlrvpp_mchp1521: Add code for ADL-P-DDR4 RVP using Microchip ECPoornima Tom2021-05-207-1/+605
* cleanup: mchp boards: Use standard eSPI configsPoornima Tom2021-05-203-9/+9
* mchp: Default espi configurationPoornima Tom2021-05-202-29/+38
* zephyr: shi/it8xxx2: Ensure spi chip select alt function is enabled.Dino Li2021-05-201-1/+14
* zephyr: asurada: enable 1.8v signalsDino Li2021-05-201-16/+21
* drivers/temp_sensor: add thermistor resistance table docJett Rink2021-05-192-1/+110
* charge_manager: Check extpower after charge portAseda Aboagye2021-05-191-1/+5
* dedede: Rework `extpower_is_present()`Aseda Aboagye2021-05-197-25/+31
* sm5803: Add sm5803_is_acok()Aseda Aboagye2021-05-192-4/+66
* raa489000: Add raa489000_is_acok()Aseda Aboagye2021-05-193-0/+28
* zephyr: asurada: Enable power button and sequencingDenis Brockus2021-05-1910-20/+56