summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* i2c-pseudo: Fix wrong word in ADAPTER_START documentationMatthew Blecker2020-05-021-1/+1
* servo_v4: Monitor HPD and signal DUT over PD commWai-Hong Tam2020-05-012-5/+93
* TCPMv2: Port over interrupt storm tracker from v1Diana Z2020-05-011-1/+41
* Various boards: Shrink UART Tx buffer to save spaceAbe Levkoy2020-05-015-3/+7
* it83xx tcpc: Captured received SOP message typeKeith Short2020-05-014-3/+9
* Puff: Add tcpci_dump command and ppc interrupt checkAndrew McRae2020-05-012-0/+7
* USB PD: Check supplier instead of port.Andrew McRae2020-05-011-3/+3
* tcpmv2: allow for a default PD debug levelDenis Brockus2020-05-011-0/+4
* tcpmv2: don't clobber data role on entry to TC_ATTACHED_SNKDenis Brockus2020-05-011-2/+22
* tcpmv2: SNK HardReset cleanup - fix final commentsDenis Brockus2020-05-014-47/+84
* OCPC: Add concept of active charger ICAseda Aboagye2020-05-0118-64/+188
* bc12: Limit max current to 1.5AAseda Aboagye2020-04-306-31/+53
* dedede: Add support for S0ixAseda Aboagye2020-04-301-0/+3
* usb_pd_alt_mode_dfp: Don't store too many SVIDsAbe Levkoy2020-04-301-1/+1
* charge manager: only debounce CHG_TYPE with batteryPeter Marheine2020-04-301-0/+9
* servo_v4: Support DP alt-modeWai-Hong Tam2020-04-303-6/+210
* test: Add on-device unit test for STM32 RTCTom Hughes2020-04-308-0/+67
* Bobba: Add battery AP19A5KDavid Huang2020-04-302-0/+30
* trondo: Initial EC imagestabilize-13070.B-masterDavid Wu2020-04-309-0/+1226
* ampton: change sku id 3,4 for g-sensor BMA253 in the lidJames_Chao2020-04-303-12/+43
* HACK: jinlon: Prevent system can't power onDevin Lu2020-04-301-0/+22
* berknip: Initial EC imageZick Wei2020-04-308-0/+868
* it8xxx(iteflash): Support KGD FlashDonald Huang2020-04-301-14/+255
* Wheelie: Initial EC imageTommie Lin2020-04-308-0/+1264
* jinlon: Reduce input voltage to 5V when battery fullDevin Lu2020-04-301-1/+28
* tcpci: display when we send/receive Hard ResetDenis Brockus2020-04-301-0/+12
* tcpmv2: SNK HardReset cleanupDenis Brockus2020-04-305-18/+61
* Jinlon: Select CONFIG_KEYBOARD_REFRESH_ROW3Rajat Jain2020-04-301-0/+1
* SM5803: Only enable auto charging when battery is presentDiana Z2020-04-301-3/+6
* Waddledee: Increase PDCMD task sizeDiana Z2020-04-301-1/+1
* usb_pd: Correct processing discover SVIDAyushee2020-04-291-3/+3
* raa489000: Bit 7 of control3 is to enable autonomous chargingMarco Chen2020-04-291-1/+6
* TCPMv2: Signal to TC Layer that PR Swap is complete on state exitSam Hurst2020-04-292-3/+14
* TCPMv2: Add dump pd command needed by PD_FAFTSam Hurst2020-04-296-6/+106
* ioexpander/it8801: to avoid causing cache to reset when EC is resettim2020-04-291-12/+22
* kakadu: implementation of Vconn boostScott Chao2020-04-291-2/+2
* Button: Add unit tests for simulated button presspandeyan2020-04-292-0/+135
* it83xx/adc: enabled GPIO alternate mode by default for pin into gpio.inc mark...tim2020-04-298-57/+26
* Zork: Configure GPIO86 EC_H1_PACKET_MODE lowEdward Hill2020-04-296-24/+6
* stm32: Enable more on-device unit testsTom Hughes2020-04-295-5/+45
* TCPMv2: Exit PE_VCS_Send_Ps_Rdy_Swap after Accept receivedDiana Z2020-04-291-32/+38
* TCPMv2: Set AMS start for messages in pe_attempt_port_discoveryDiana Z2020-04-291-0/+9
* Zork: Move charger I2C to match HW changeEdward Hill2020-04-299-34/+71
* SM5803: Share setting of FLOW_REG1 between tasks betterDiana Z2020-04-281-9/+20
* TCPMv1: skip cable probing when not VCONN sourceKeith Short2020-04-283-30/+15
* Ampton: assert RSMRST to PCH while force shutdownDino Li2020-04-281-0/+14
* damu: correct battery i2c portScott Chao2020-04-281-1/+1
* power/mt8183: fix power btn behavior for clamshell devicesTing Shen2020-04-281-0/+4
* sm5803: Fix interrupt enable bugAseda Aboagye2020-04-281-1/+1
* malefor: turn off USB4 and Thunderbolt supportxiong.huang2020-04-284-34/+13
View Lorry Controller Status