| Commit message (Collapse) | Author | Age | Files | Lines |
... | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously I neglected to increment the buffer pointer which would
allow double writing of same data and exclude tail if write didn't
complete in one call.
Also fixing bug with EAGAIN/EWOULDBLOCK to retry in those cases.
Previously we'd just have just failed for those errno values.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=none
BUG=chromium:371147
TEST=still compiles
Change-Id: I30dbe56b2a4c735c487464349786a9db430130a8
Reviewed-on: https://chromium-review.googlesource.com/199052
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The auto_power_on is set 1 unexpectedly while EC jumps. This has a
side effect that would turn on the AP unexpectedly after "power off".
See comment 43 of issue 28249
BUG=chrome-os-partner:28249
BRANCH=tot,nyan
TEST=on nyan:
> reboot
> sysinfo
// If EC is in RO, "sysjump RW"
> power off
// The AP keeps off.
Change-Id: I3c06e99383c06af7cd6c17dd65040e20f06d8e73
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/198941
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a follow-up for CL 197990 and 197991. See issue tracker for
more details.
BUG=chrome-os-partner:28289
BRANCH=tot,nyan
TEST=Copy from https://chromium-review.googlesource.com/#/c/197990
Going battery shipmode and plug-in AC, See booting and expect EC log:
"[... battery initialized]"
Disconnect battery, and plug-in and see booting and expect EC log:
"[... battery not responding]"
Change-Id: Ic218414c21057a971b478ec60e406f1eb69dd379
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/198412
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
FAFT expects the "AP running" shows first, then "XPSHOLD seen".
BUG=chrome-os-partner:28316
BRANCH=tot,nyan
TEST=build only
Change-Id: Ic3e9d68b7727d62d3ccc2c037e7547f0276c2eae
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/198766
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If we follow the TEST steps below, the power state machine in AP
and EC were out of sync -- due to the un-clear bit and wrong
initial power state.
BUG=chrome-os-partner:24835
BRANCH=tot,nyan
TEST=on big.
> reboot
> power off // De-assert XPSHOLD
> reboot ap-off
> sysinfo // This reset flags does NOT contain "ap-off".
> power on
% ectool reboot_ec RW // The following message is NOT observed.
// "system is on, but RESET_FLAG_AP_OFF is on".
> power // This should show the AP is "on".
// ensure everything still works.
> reboot ap-off // AP keeps off.
> reboot // AP is on.
Change-Id: I51afed7201d16ebcd889ad12a7af90026591cc2d
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/198587
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If we sysjump to EC-RW, that sets enabled=0. enabled is only set back
to 1 when the chipset resumes. But on an AP-requested sysjump, the
chipset is already on, and so the resume hook never gets called.
So, in spi init, check if the AP is already on. If it is, enable spi
transfers right away.
This probably also affects Pit/Pi. That may need an additional fix in
power/gaia.c, if it returns an incorrect chipset state after a sysjump
(I didn't test that.)
BUG=chrome-os-partner:28249
BRANCH=nyan,pit
TEST=Power+Refresh boot system with RONormal disabled, so that the AP
tells the EC to jump to EC-RW. Confirm EC communication still works
after that.
Change-Id: I588ef6d841040cf05d5527f645f122d5708b16ad
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/198869
Reviewed-by: Yung-chieh Lo <yjlou@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Yung-chieh Lo <yjlou@chromium.org>
Tested-by: Yung-chieh Lo <yjlou@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The power_request variable is not clear in apshutdown case. Thus,
the AP comes up again by the "power up" request. Clear this variable
only when apshutdown command to avoid affecting the regular power
states.
BUG=chrome-os-partner:28621
BRANCH=tot,nyan
TEST=see below
> reboot // or other methods to turn on the AP.
> power on
> apshutdown
// The AP should remain off.
Change-Id: Icfc8a50db95aba656168f5b10dabd9443d75338d
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/198770
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some battery uses clock stretching feature, and this could disturb
PMU communication before battery going stable.
AP does not know and will attempt PMU setting, and could get fail
For various battery indicates usually 1s for stable
(even if it is much less in real world 200ms~700ms)
Let's checking 'battery is ready' when first pump-up power.
BUG=chrome-os-partner:28289
TEST=Going battery shipmode and plug-in AC, See booting and EC log
Disconnect battery, and plug-in and see booting and EC log
Change-Id: I9b62266132d5322366265afe03adbe0db1f9ae75
Signed-off-by: Wonjoon Lee <woojoo.lee@samsung.com>
Reviewed-on: https://chromium-review.googlesource.com/197991
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some battery uses clock stretching feature, and this could disturb
PMU communication before battery going stable.
AP does not know and will attempt PMU setting, and could get fail
For various battery indicates usually 1s for stable
(even if it is much less in real world 200ms~700ms)
Let's checking 'battery is ready' when first pump-up power.
BRANCH=ToT
BUG=chrome-os-partner:28289
TEST=Going battery shipmode and plug-in AC, See booting and EC log
Disconnect battery, and plug-in and see booting and EC log
Change-Id: Idd8ae2ab4ec164b11fe67413bbf647cad18bc481
Signed-off-by: Wonjoon Lee <woojoo.lee@samsung.com>
Reviewed-on: https://chromium-review.googlesource.com/197990
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While debugging reboot issue, it was difficult to get POST code from failing
boards. Currently POST code is only accessible from EC console. Not all boards
are fitted with servo board.
This patch adds Port 80 history access from ectool. Reuse command code 0x48,
EC_CMD_PORT80_LAST_BOOT with version 1.
Signed-off-by: Wenkai Du <wenkai.du@intel.com>
BUG=chrome-os-partner:28514
BRANCH=rambi
TEST=manually test on rambi to confirm port 80 history match EC console
Change-Id: If204d8fb457d8d8d18055f8282a406a35c03305e
Reviewed-on: https://chromium-review.googlesource.com/198012
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Wenkai Du <wenkai.du@intel.com>
Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Tested-by: Wenkai Du <wenkai.du@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This may not contain all. I filtered out possible code by the
following command:
find . -name "*.h*" -o -name "*.c*" | xargs grep -n CPRINTF | \
grep -v "\[" | grep -v define | less
BUG=none
BRANCH=none
TEST=make buildall tuntests
Change-Id: I674f84f5966b34aeb8d4321d22629b450627a120
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/197997
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The electrical design has changed :
the output enable GPIO (PF0) has switched from being the LM5050 shutdown
pin to controlling directly the FET enabling. We need to invert the
control logic and use it in push-pull mode rather than open-drain.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28332
TEST=plug a reworked Zinger to a firefly and check the firefly LED is
displaying a solid ON (meaning the voltage is right).
Change-Id: Iee79b07f49eade1fee7cac1986bc38ba21e04b25
Reviewed-on: https://chromium-review.googlesource.com/198240
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ensure that the board will get power from VBUS by default, so it can
start-up if it's own battery is fully drained.
Also increase the console stack as the battery code footprint is growing
over time.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28311
TEST=plug a Fruitpie without battery to a Zinger.
Change-Id: I971040da9bedb7bf46363787a13220c39a78100d
Reviewed-on: https://chromium-review.googlesource.com/198557
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We found some cases where the battery can flip out and get confused
and hold the i2c lines. Since the battery is actually smbus it will
give up after 25ms. Increase our timeout to 30ms so that the next
trasaction will work OK.
BRANCH=ToT
BUG=chrome-os-partner:28425
TEST=Revert (1cd618e Wait for battery boot-up) and use a problematic
battery; see boot works OK.
Change-Id: Ife051220cbbbd49d7bc9c8607ba177cd9582fe58
Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/198212
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
See issue tracker for details.
BUG=chrome-os-partner:28518
BRANCH=tot,nyan
TEST=on big
% reboot ap-off
% powerbtn
[6.100943 power on 4]
Was power on 1 before fix.
% reboot
[0.098134 power on 2]
Was power on 1 before fix.
Change-Id: I7b2fd95234d16467edca041b1c12d63ca4b5112b
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/198070
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Detect over-current and over-voltage and trigger a fault.
The over-current threshold is 10% over 3A (3.3A).
Only currently implement the slow protection,
the fast interrupt-based one will be done later.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28331
TEST=with Zinger connected to an electronic load, adjust the current to
3.35A and see the output voltage cut.
Change-Id: I0e848192392fd73f0839d4bcb806528b2a6b9122
Reviewed-on: https://chromium-review.googlesource.com/197947
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
XPSHOLD is not always removed after chipset_force_shutdown(). This is
different to the GAIA design. So, check the RESET_FLAG_AP_OFF flag
again while check_for_power_on_event().
BUG=chrome-os-partner:28371
BRANCH=tot,nyan
TEST=verify on big.
re-flash ec: power on 2, AP is up.
AP is on, reboot@EC: power on 1, AP is up.
AP is off, reboot@EC: power on 2, AP is up.
AP is on, reboot ap-off@EC: AP keeps off (see FLAG_AP_OFF flag)
AP is off, reboot ap-off@EC: AP keeps off (see FLAG_AP_OFF flag)
reboot ap-off@EC, then 'powerbtn': AP is off at boot, then power on 4
reboot@EC: power on 2, AP is up.
re-plug AC (remove battery): power on 2
re-plug battery (without AC): power on 2 (but my battery is dead)
power off (S5), power on: power off 4, power on 5
power off (G3), power on: power off 4, power on 5
lid close / power off (S5)/ lid open: power on 3
lid close / power off (G3)/ lid open: power on 3
press power button and release: nothing happens after 15s. AP keeps in S5.
button off (S5)/ on: power off 3, power on 4
button off (G3)/ on: power off 3, power on 4
power off (S5)/ button on: power off 4, power on 4
power off (G3)/ button on: power off 4, power on 4
button off (S5)/ power on: power off 3, power on 5
button off (G3)/ power on: power off 3, power on 4
button off (S5)/ lid open: power off 3, power on 3
button off (G3)/ lid open: power off 3, power on 3
is off, long press button (60s): power on 4, too long, shutdown, stay off
is on, long press button (60s): power off 3, stay off
AP is on, apreset cold: entered to S5, power off 3, power on 5
AP is on, apreset warm: power state is not changed, but reboots to BIOS
Change-Id: I9ccd13ab4b5f38be1ad8d6c9a04724b56bc5b166
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/197604
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since we already created the firmware-nyan-5771.B branch, we can
remove this from ToT now. But for sure we are still able to
cherry-pick changes back to ToT or from ToT.
BUG=none
BRANCH=tot
TEST=make buildall
Change-Id: I637d27b9f8672c5d17b60e210a5211ab8e19b54a
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/197165
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Ensure that we finish reception if and only if we started it
whatever other events happened.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28332
TEST=Connect Zinger to Firefly, request higher voltage and ensure that
Firefly was still getting the Pings after several hours.
Change-Id: Ie99984aeb4c565be39d349457dbd2813203b3f5b
Reviewed-on: https://chromium-review.googlesource.com/197946
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Ensure that the power sink as expected by the standard or
times out if nothing happens.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28332
TEST=connect Firefly to Zinger and transition between voltages using
Firefly buttons.
Change-Id: I99e482982e4788a52bc2c1a57d672c3d71ff22e2
Reviewed-on: https://chromium-review.googlesource.com/197052
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is another patch to fix the bug which causes a HardFault exception
at the "svc" instruction in __wait_evt().
The HardFault is due to a priority escalation problem in which "svc"
is called when the PRIMASK is high, meaning interrupts are disabled.
The issue was that an interrupt can occur just before the "svc"
instruction, and when an interrupt fires that performs a context switch,
the IRQ handler disables interrupts setting the PRIMASK reg high.
The arm v6 reference manual specifies that "PRIMASK unchanged on
exception exit". So, therefore, we must clear PRIMASK by running "cpsie"
before exiting IRQ handler.
BRANCH=none
BUG=chrome-os-partner:28296
TEST=
Reproduce the problem on a fruitpie by inserting dummy for loop in
__wait_evt() before "svc" call:
asm volatile("isb");
for (i = 0; i < 250; i++) ;
__schedule(1, resched);
Then, when running pd dev, the system gets the HardFault exception
within a few minutes because there is more time for an interrupt
to occur and disable interrupts right before call to "svc".
After applying this patch, the code has run for > 3 hours without
a HardFault.
Change-Id: Ic50252b09c40c7d76975ff7f16d799c9eae2bde6
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/197839
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For targets not using the common runtime functions, the current test
content does not make much sense and fails to build properly :
de-activate the tests build in that case.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28480
TEST=USE=usbpd emerge-samus chromeos-ec
Change-Id: Ic6477861b5a86916f29a9f6bb70ed0def3661886
Reviewed-on: https://chromium-review.googlesource.com/197883
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With change b610695b61db3b3784e2a516c91f429139616100, we fixed a problem
with the number of FP regs that were being saved on the stack. That change
decreased the required stack size for non-FP tasks by 64 bytes, but
increased the size needed for FP tasks (such as the lightbar).
The lightbar task was previously using within 64 bytes of its alloted stack,
so handling the task switching correctly meant that it now overflowed.
The hooks task had the same problem, but was hidden by the lightbar task.
This CL bumps the LARGER_TASK_STACK_SIZE up a bit, and switches the lightbar
task to use it instead of the default size.
BUG=chrome-os-partner:27971, chrome-os-partner:28407
BRANCH=ToT
TEST=Try it on both Link and Samus.
Before this change, the Samus lightbar was overflowing its stack every time
the AP booted (causing the lightbar to do things). With this change, it
doesn't. Here are typical stack sizes after this CL:
Task Ready Name Events Time (s) StkUsed
0 R << idle >> 00000000 28.394913 328/512
1 HOOKS 00000000 0.534085 640/768
2 R LIGHTBAR 10000000 5.359356 520/768
3 CHARGER 00000000 0.094674 384/512
4 CHIPSET 00000000 0.003353 320/512
5 KEYPROTO 00000000 0.002814 312/512
6 HOSTCMD 00000000 0.002942 244/512
7 R CONSOLE 00000000 0.193776 340/768
8 POWERBTN 00000000 0.000392 248/512
9 KEYSCAN 00000000 0.409337 332/512
Change-Id: Ica93608c8adb225410a62ec3a0a27944c479270a
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/197733
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Column 0 is on the slave side. Fix this.
BUG=None
TEST=Press a finger at the center of the panel. See a single shape in
touch data.
BRANCH=None
Change-Id: Ic3a9a4fafc6e7ee39a1c3422905cf3b1758f335a
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/197641
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In some cases, the system will boot to S0 from the point of view of
the EC, but PLTRST# will never deassert. Work around this by waiting
50 ms for PLTRST# to deassert. If it doesn't, force the chipset all
the way down by deasserting RSMRST#, then pulse the power button to
turn it back on.
Also add a powerfail debug command to simulate this failure event, so
that the recovery process can be tested.
Add API to the LPC module to get the state of PLTRST#, and to the
power button state machine to force it released when we shut down the
chipset and and force another power button pulse as we reset the
chipset.
BUG=chrome-os-partner:28422
BRANCH=baytrail
TEST=1. Boot system. Should boot normally. Shut system down.
2. powerfail
3. Boot system. On the EC console, should see the system come up,
go back down through G3S5, then come back up. From the user's
point of view, it just boots.
1. Boot system. Should boot normally. (That is, powerfail is not sticky)
Change-Id: Ia57f196606f79b9f2fce7d9cd109ab932c3571aa
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/197523
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Most of the time we don't need to use a debugger during runtime. Let's
disable SWD ports so that we can use the two pins for touch scan.
We can still re-flash the chips as long as we hold the reset pin when
entering SWD mode.
BUG=None
TEST=Check we can still re-flash the chips
BRANCH=None
Change-Id: Ieb34406f4bc6d6a753ec840b3072f363c7b17c08
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/197196
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The current identification method uses SPI_NSS as master/slave
indication. However, if the other chip is not reset at the same time, it
would drive SPI_NSS and fails the identification.
Since the master chip is equipped with USB connection, we can identify
the chips with USB pull up pin, which doesn't suffer from this problem.
Also updates the comments on pin usage.
BUG=None
TEST=Reset the chips repeatedly.
BRANCH=None
Change-Id: Iccd7e73fca85abfa554f90dcb7e354cc4cc04626
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/197194
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This implements dual chip matrix scanning. Now the scan result is only
dumped to debug output.
BUG=None
TEST=Put a finger on the panel and see its shape.
BRANCH=None
Change-Id: I015c901b42e24fe4a6249c12c37bc5bfcb308c9f
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/196468
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The current SKU has 32kB.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=read-back the flash content from a Zinger power brick using
"stm32mon -r".
Change-Id: Id74e585f4b49b9ef5fecdec8182f3710eb0b4960
Reviewed-on: https://chromium-review.googlesource.com/196690
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Firefly is the test/burn-in board for Zinger production.
It's acting a Power Delivery sink.
The plug polarity is not managed correctly yet.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=none
Change-Id: I57f525ad04c519f2fa458635a1c6cc45a503e5ac
Reviewed-on: https://chromium-review.googlesource.com/195586
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use the plug polarity detected by the ADCs to do the PD communication on
the right CCx line.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28339
TEST=make buildall
on Firefly, plug Zinger connector in both direction and see it can
control it either way.
on Fruitpie, use CC1 or CC2 and see it can communicate on both.
Change-Id: I81cb00f164cb8194fba73b383014e81c37d975e2
Reviewed-on: https://chromium-review.googlesource.com/197520
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Slightly modify interfaces for better sink-only devices implementation
(eg Firefly)
update the host mode management and the voltage selection
and add a hook for board checks.
Simplify the reception timeout and fix other timeout detections.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=make buildall
and use with the follow-up firefly board configuration CL.
Change-Id: I0240295764c8605793dc80a2fc21357af1740744
Reviewed-on: https://chromium-review.googlesource.com/195585
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ectool gpioget - returns all GPIOs (with flag info)
ectool gpioget <GPIO_NAME> - get value of <GPIO_NAME>
ectool gpioget count - returns number of GPIOs
ectool gpioget all - returns all GPIOs (with flag info)
BUG=chromium:344969
TEST="ectool gpioget [<subcmd> <GPIO_NAME>]" returns correct information
on squawks
BRANCH=none
Change-Id: Ib6f0d8135a76501f08b084bfd7eb1f2689d5d6e0
Signed-off-by: Mohammed Habibulla <moch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/196680
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Added config option CONFIG_USB_PD_TX_USES_SPI_MASTER which switches
to use SPI master for PD transmit. The advantage of SPI master mode
is at the end of the tranmission, we don't have to send any dummy 0
bits. When the option is set, the CPU_CLOCK must be set to 38.4MHz,
so that the SPI master can generate the correct clock frequency.
BUG=chrome-os-partner:28309
BRANCH=none
TEST=Tested by connecting two fruitpies together across CC1. One
fruitpie has been modified such that the MISO and MOSI lines are
swapped and is running PD TX in SPI master mode with 38.4MHz clock,
while the other is running PD TX in SPI slave mode. On EC console
ran pd charger on one board and pd dev on other board. Verified
that communication works with no errors. Ran for 10 minutes in each
configuration.
Change-Id: Ib24030d34d95d59f4ac6c2dae98bf7adda1ada01
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/197215
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Charger V1 only. This is a clearer name for the intent of
the function to override the charging parameters requested
by the battery. This also disabmiguates this function with
a new host command to get and set arbitrary vendor
parameters in the battery.
BUG=chrome-os-partner:25145
BRANCH=ToT
TEST=`make buildall -j`.
Change-Id: I1e8762d359c0e91c5b2a539553d22c12c9850c03
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/195823
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/197164
Reviewed-by: Yung-chieh Lo <yjlou@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Also adds 'battparam' console command.
BUG=chrome-os-partner:25145
BRANCH=ToT
TEST=Run 'ectool batteryparam set 0 0x1234'
'ectool batteryparam get 0'
and on the console:
'battparam 0'
'battparam 0 0x1234'
on a board that implements parameter 0.
Change-Id: I9cc54d001631f53dd39ae64cfdeececaa1747181
Original-Change-Id: Ib2812f57f2484309d613b23dab12ad43e0417bd2
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/195824
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/197162
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the micro runtime for Zinger, wait for events with interrupt disabled
to avoid race conditions where the event interrupt happens just after we
tested it and before going to sleep.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=make BOARD=zinger, test Zinger PD communication from Firefly.
Change-Id: I10b919450a61fac7ea50e84dd73bcc568150e179
Reviewed-on: https://chromium-review.googlesource.com/197051
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When using a "non-servo" debug dongle or integrated FTDI chip to flash a STM32
microcontroller, add the option to toggle the reset of the
microcontroller if the control exists.
This was not done for the original Toad version because it cannot
control the reset line, but now Firefly, Zinger, Fruitpie debug
interfaces can do it.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=./util/flash_ec --board=zinger
Change-Id: Ia21e3b3403e56b4c0797582659d9a3a0c26bb8bb
Reviewed-on: https://chromium-review.googlesource.com/197050
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The external interrupts above 15 are not used for GPIO IRQ handling, but
for special purpose interrupts from internal peripherals (e.g. RTC,
comparator, wake-up ...). When processing the GPIO interrupts, we should
explicitly skip those interrupts, else if a GPIO interrupt happens
first followed by another EXTINT, the loop in gpio_interrupt() will try
to process it and do an out-of-bound read of the exti_events array.
This will retrieve a garbage handler triggering a memory fault.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28296
TEST=on Firefly, press the buttons to trigger GPIO interrupts while
there are a bunch of comparator interrupt on EXTIN21 (due to on-going
USB PD communication). I no longer see HardFaults.
Change-Id: Id90fab30215b0f7f8060c19de63a7ca8418b7b3c
Reviewed-on: https://chromium-review.googlesource.com/197019
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
From time to time (usually under heavy interrupt load), the runtime on
Cortex-M0 was panic'ing at the "svc" instruction with a HardFault
exception (inside the wait_event() function).
The issue was probably the following :
the wait_event() code is doing an atomic_read_clear() whose critical
section disables interrupts and re-enables them using "cpsie i",
then do __schedule() call which is essentially a "svc" instruction.
According to ARMv6-m reference manual :
"If execution of a CPS instruction:
increases the execution priority, the CPS execution serializes that
change to the instruction stream.
decreases the execution priority, the architecture guarantees only that
the new priority is visible to instructions executed after either executing
an ISB instruction, or performing an exception entry or exception
return."
So, when we are executing the "svc", PRIMASK.PM can still be seen as 1
(while it was set to 0 by "cpsie i") and in that case the software
interrupt is replaced by a HardFault.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28296
TEST=run Firefly board under load for extended periods of time.
Change-Id: Ie355c36f06e6fe2fee5cca8998a469fa096badad
Reviewed-on: https://chromium-review.googlesource.com/196659
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a shortcut in smart battery driver and i2c passthru. Once
the battery cut-off order is submitted (in the factory line),
the EC will no longer talk to battery.
BUG=chrome-os-partner:28248
BRANCH=tot,nyan
TEST=See below
> remove AC, cutoff: expect system is off.
> cutoff, then remove AC: expect system is off.
> cutoff, wait for 1 min, then remove AC: expect system is off.
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Change-Id: Ied963c19d17d581ce99e4543469cf2fa165f0439
Reviewed-on: https://chromium-review.googlesource.com/196657
Tested-by: Yung-chieh Lo <yjlou@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Queue: Yung-chieh Lo <yjlou@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The CL fcf26a4 enabled periodically charge_request(). However, that
could fail and generates lots of error message in the EC console if
the AC is not on and charger refuses the request (even it is 0v/0mA).
BUG=none
BRANCH=tot,nyan
TEST=make runtests. Tested on big. Expect NO below annoying error message
[1.353104 charge_request(0mV, 0mA)]
[1.453170 charge_request(0mV, 0mA)]
[1.553281 charge_request(0mV, 0mA)]
[1.653317 charge_request(0mV, 0mA)]
in the follwing cases:
AC on, battery attached, power on, then remove/plug in AC.
AC on, battery attached, power on, then remove/plug in battery.
AC on, battery removed, power on, then plug in and remove battery.
AC off, battery attached, power on, then plug in and remove AC.
'chgstate' also shows good state. At final, charge for 10 mins.
Change-Id: Icc729c52246df1ecfb7f289b5078dbc122b20a74
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/196678
Reviewed-by: Lin Cloud <cloud_lin@compal.com>
Tested-by: Lin Cloud <cloud_lin@compal.com>
Reviewed-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We are running a minimal runtime with less overhead. This allows us to
run UART at 38400 bps. Let's update the config for easier debugging.
Also fix a potential underflow bug.
BUG=None
TEST=See debug output at 38400 bps
BRANCH=None
Change-Id: Ic9e4f9d545f5dbc4a0816a843b0f01a4cf219666
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/196190
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This implements a simple SPI driver for the two chips to exchange
packets.
There are both sync interface and async interface. Sync interface is
easier to use, and async interface frees the CPU while the DMA takes
care of the communication.
BUG=None
TEST=Hello test passed
BRANCH=None
Change-Id: I9823bad5cae6d1fa8f3658d17af4b998d3735a3e
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/195533
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The two chips work together, so let's teach them how to tell master from
slave. After identification, the two chips shake hands through the two
sync signals.
BUG=None
TEST=Disable handshake on master. See slave fail. Vice versa.
BRANCH=None
Change-Id: Idb6a56128f608dd2ee5c453f75abea475fe1779f
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/195395
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add bq24735 driver and move to here for further developing
BRANCH=big
BUG=None
TEST=test basic charing/discharging function
Change-Id: I66c22a29cf94383cec86c5cf53db82494504fa77
Reviewed-on: https://chromium-review.googlesource.com/196541
Reviewed-by: Yung-chieh Lo <yjlou@chromium.org>
Tested-by: Lin Cloud <cloud_lin@compal.com>
Commit-Queue: Lin Cloud <cloud_lin@compal.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
So that host and EC commands will be defined in common/battery.c.
The board-specific battery.c can focus on the proprietary method.
BUG=chrome-os-partner:28248
BRANCH=tot,nyan
TEST=make buildall runtest
Tested "cutoff" in EC console on big.
Change-Id: I213c0d601d0241c8dea309d6ac60c72452d2d100
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/196621
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some chargers support a timeout mechanism that it would stop charging
if no voltage/current setting comes from battery or EC. This is designed
for safety.
In charger v1, it always updates charger periodically. But in v2, old code
only updates charger when needed. New code updates the charger periodically.
Also keep the ability for debugging. A manual mode is introduced so that
any requested volt/curr from host and force idle mode request would trigger
this mode. To leave this mode, just disable the force idle mode.
BUG=chrome-os-partner:28201,chrome-os-partner:28208
BRANCH=nyan
TEST=See below.
Plug AC and battery. Wait for 10 mins and the battery is charged normally.
'chgstate idle on': the charger doesn't charge the battery.
'chgstate idle off': charge again.
Plug in AC and remove battery: No annoying repeated message and works fine.
Plug in battery and remove AC: No annoying repeated message and works fine.
Power up machine with battery only: No annoying repeated message and works fine.
Power up machine with AC only: No annoying repeated message and works fine.
Change-Id: I00d62f8afa2fe2627ea9259f11679ced02af897a
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/196385
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This adds the basics for the accelerometer potion only of the ST
lsm6ds0 accel/gyro. Still need to add the acceleration interrupt
functionality, and all of the gyro portion of the chip.
BUG=none
BRANCH=none
TEST=Tested on a samus prototype hacked up to have the lsm6ds0 connected
to the EC i2c bus. Added motion sense task to the samus tasklist, added
accelerometer information to the samus board file, and tested console
functions interacting with accelerometer. The data seems reasonable,
and can successfully change data rate and range.
Change-Id: I7949d9c20642a40ede82dc291b2c80f01b0a7d8b
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/196426
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Charger v2 assumes the battery_get_info() always returns non-NULL even
if the battery is not detected, for example, in the over-drained
situation. Thus, add a new struct so that we know what the conservative
setting is to pre-charge the unknown battery.
BUG=chrome-os-partner:28112
BRANCH=nyan,big,blaze
TEST=See issue tracker for the test procedure.
Change-Id: Ica4fe75d154e2f195eb1da19ba045346da383b6c
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/195596
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Devin Lu <Devin.Lu@quantatw.com>
Tested-by: Devin Lu <Devin.Lu@quantatw.com>
|