| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The board init should ensure that tablet_mode is always set so the rest
of the subsystems can rely on this. We assume notebook mode if we don't
have any input from the GSR 360 hall sensor. That matches the default up
in AP firmware as well.
BRANCH=none
BUG=b:141494453,chromium:1010343
TEST=put arcada at 200 degrees and see that tablet mode it initialized
correctly.
Change-Id: I4e23d3ba149f9add84f9667a5af676803cf50da5
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1845779
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
(cherry picked from commit 9a133025d89a04a9f5afd6e57373f48564b40ed3)
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1893315
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
According to the battery spec in b/142097561#comment15, EoC current
should be 140mA.
BUG=b:142097561
TEST=make
BRANCH=kukui
Change-Id: I913a1abecd2fc6ac28ba16513c3f0cc145afc38c
Signed-off-by: Ting Shen <phoenixshen@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1866212
Reviewed-by: Eric Yilun Lin <yllin@chromium.org>
Commit-Queue: Ting Shen <phoenixshen@chromium.org>
Tested-by: Ting Shen <phoenixshen@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On-pack battery gauges should have better knowledge about battery life, so
maybe we can trust SoC value reported from gauge and don't need this
hack.
BUG=b:142097561
TEST=confirm battery SoC won't jump to 97% unexpectedly
BRANCH=kukui
Change-Id: Ie3efdcbfa6d6525040e68b5abe0345a4b6c1fcde
Signed-off-by: Ting Shen <phoenixshen@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1866210
Reviewed-by: Eric Yilun Lin <yllin@chromium.org>
Commit-Queue: Ting Shen <phoenixshen@chromium.org>
Tested-by: Ting Shen <phoenixshen@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix the dimensions, and also the size, and make sure that updating
the FW actually works (it seems like increasing the timeout to
2000ms is needed).
BRANCH=kukui
BUG=b:140596094
TEST=Flash masterball, no warning in console on start
TEST=
Host:
make TOUCHPAD_FW=S8648A-15H0_FW01.bin BOARD=masterball -j
USE=updater_utils emerge-kukui -av ec-utils
cros deploy $IP ec-utils
DUT:
usb_updater2 -d 18d1:503c -r; sleep 0.5; \
usb_updater2 -d 18d1:503c -s; usb_updater2 -d 18d1:503c ec.bin
usb_updater2 -d 18d1:503c -p S8648A-15H0_FW01.bin
Change-Id: Ia473ac420b42f52ad1639f950a3f08ff5d32df09
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1847512
Reviewed-by: Eric Yilun Lin <yllin@chromium.org>
Reviewed-by: Joel Kitching <kitching@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Based on the Lenovo requirement,modify the Charging and
Fully charged LED color as white
BUG=b:137618886
BRANCH=kukui
TEST=Do a charge test
Change-Id: I75a3e9f24c98a67cb6b9dda8294c73926c20d4d7
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1706248
Reviewed-by: Eric Yilun Lin <yllin@chromium.org>
Tested-by: Leo Zhou <zhoubo@huaqin.corp-partner.google.com>
Commit-Queue: Nicolas Boichat <drinkcat@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
panic.h uses types from stdint.h, so it should really include it by
default. also, order standard header files ahead of project specific
header files.
BRANCH=none
BUG=b:142031466
TEST=make buildall passes
Change-Id: I8ac6d42f1da412bd3ce20df2838b8e420ad25e52
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1855643
Tested-by: Caveh Jalali <caveh@google.com>
Commit-Queue: Caveh Jalali <caveh@google.com>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Modify EC fan control table by Thermal request. (#21)
BUG=b:136565336
BRANCH=none
TEST=Manual
Verify fan behavior by thermal team.
Remove DPTF and check fan speed with temperature.
When temperature over 65 degree, the fan start working.
When temperature over 85 degree, the fan full run.
And check system shutdown when temperature over 90 degree.
Change-Id: I0d4633e9ba93ba12f28d4d069a9ae2a7a82fcedd
Signed-off-by: Michael5 Chen <michael5_chen@pegatroncorp.com>
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1833944
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=none
BRANCH=none
TEST=When device is laying on a table, lid angle at 180, both sensors
report gravity along Z axis:
localhost ~ # ectool motionsense
Motion sensing active
Sensor 0: -1040 4336 15408
Sensor 1: 760 -291 17127
Sensor 2: 0 0 0
When on the base bottom edge, report gravity along Y axis:
localhost ~ # ectool motionsense
Motion sensing active
Sensor 0: -960 14112 -5952
Sensor 1: 453 16136 -373
Sensor 2: 0 0 0
When on its left side, report gravity along X axis:
localhost ~ # ectool motionsense
Motion sensing active
Sensor 0: 16352 -432 64
Sensor 1: 16802 -338 192
Sensor 2: 0 0 0
and check the screen rotation was normally.
Change-Id: Idbe7184d5c14eb31d7823f9e17648d9bf3df4443
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1866209
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
FIPS ACVP tests require that on an empty input, the result is the
hash of the empty string. In the current implementation, an empty
result is returned. Change the implementation so it matches FIPS
expectations.
Also added two test cases in hash crypto test to check the corner
case of the empty input.
BUG=None
BRANCH=cr50
TEST=test/tpm_test/tpmtest.py
Change-Id: I9f5c3f71e4b10cbce2ea204eeb52e57ef26ad0e7
Signed-off-by: Gurleen Grewal <gurleengrewal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1866444
Reviewed-by: Andrey Pronin <apronin@chromium.org>
Tested-by: Gurleen Grewal <gurleengrewal@google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Initialize the local struct so that the test is not flaky. Also
extract helper function and add more asserts to make the logic more
explicit to readers.
BUG=none
BRANCH=nocturne
TEST=make -j buildall
Change-Id: I84ccd097b64c3ff304f4af228121b2cb989e6ab7
Signed-off-by: Yicheng Li <yichengli@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1865956
Reviewed-by: Craig Hesling <hesling@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Configure power sequencing interrupts and power-enable lines. Leave
SLP_S4_L, which will be virtual, unimplemented for now.
BUG=b:139553375
TEST=make buildall
BRANCH=none
Change-Id: Idf11290c84deb9ea2a71f5498a4a0db5363d2a3b
Signed-off-by: Abe Levkoy <alevkoy@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1865481
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add usb_tcpm_v2_fuzz, a TCPMv2 version of usb_pd_fuzz.
This gives some fuzz test coverage of:
common/usbc/usb_pe_drp_sm.c
common/usbc/usb_prl_sm.c
common/usbc/usb_sm.c
common/usbc/usb_tc_drp_acc_trysrc_sm.c
common/usbc/usbc_task.c
BRANCH=none
BUG=none
TEST=make run-usb_tcpm_v2_fuzz
Change-Id: Ic129d9ebbe9bb37c2ca2674106e2a6652d08ee2a
Signed-off-by: Edward Hill <ecgh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1865017
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Commit-Queue: Denis Brockus <dbrockus@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The compile time IF_ENABLED(CONFIG_USB_MUX_XXX) does not work on kukui,
change this to runtime selection.
BUG=b:135079572
TEST=On Krane Rev5/Kodama, verify the mux switch to dp + usb mode
(i2cxfer r 0 0x48 0x11 returns 0x03 or 0x13)
BRANCH=kukui
Change-Id: Ib44f0c383ed5f9156e3dd3bf6faa3daebb22e146
Signed-off-by: Ting Shen <phoenixshen@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1864493
Tested-by: Ting Shen <phoenixshen@chromium.org>
Commit-Queue: Ting Shen <phoenixshen@chromium.org>
Reviewed-by: Eric Yilun Lin <yllin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Changing PLL and standby instruction didn't work on AX have been
fixed on this version, so we can remove patches dedicated for AX.
- Enable more chip config option.
- Disable IT83XX_INTC_GROUP_21_22_SUPPORT option:
Because IT8xxx2 series has its own interrupt group 21 and 22,
so we will create another CL to support them.
- System triggers a soft reset by default if IT83XX_ETWD_HW_RESET_SUPPORT
option is enabled.
BUG=b:134542199; b:133460224; b:142029177
BRANCH=none
TEST=boots on BX version.
console command reboot:
reboot hard
Hard-Rebooting!
[Reset cause: power-on hard]
reboot
Rebooting!
[Reset cause: soft]
Change-Id: I06e57952cd758b4f344ada0f87729c961b1e747b
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1835884
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The READY_HOLD_OFF_US was set to 200 msec for both SNK and SRC
connections. However, in the case of SRC, there can be a race
condition with charge through hubs that initiate a power swap request
and the SRC port sending the VDM discover idenity message.
This CL makes the holdoff timer delay longer for SRC connections and
prefixes READY_HOLD_OFF_US with SNK/SRC to differentiate the two timer
values.
BUG=b:140092163
BRANCH=None
TEST=Tested with the AA-AM1N95W charge through hub. Verfied
that this can be attached to Kohaku with external power already
connected and successfully power role swap into source to charge the
kohaku port. Tested 20-25 connections with no failures. Prior to this
change the failure rate was 1 out of 3 attempts.
Change-Id: I375415fec96baf44ecd4592033e8b44ed4616011
Signed-off-by: Scott Collyer <scollyer@google.com>
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1776844
Tested-by: Scott Collyer <scollyer@chromium.org>
Tested-by: Jongpil Jung <jongpil19.jung@samsung.corp-partner.google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1. Recent change https://crrev/1730605 introduced syntax error which is only
affecting build with CRYPTO_TEST=1. This patch fixes it.
2. -Wformat which was turned on for /platform/ec caught another issue with
CPRINTF() not receiving right number of parameters.
BUG=none
BRANCH=cr50
TEST=make BOARD=cr50 CRYPTO_TEST=1
Change-Id: Id5e61f7633d6e93aff761771c22b888aebd87265
Signed-off-by: Vadim Sukhomlinov <sukhomlinov@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1863813
Tested-by: Andrey Pronin <apronin@chromium.org>
Commit-Queue: Andrey Pronin <apronin@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-by: Andrey Pronin <apronin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This CL adds a check in pd_transmit to prevent sending tx messages if
there are pending rx messages to be processed. This fixes an issue
where a power role swap request is received, but before the accept
reply can be sent a VDM discover identity message is sent which
confuses the other side of the connection.
BUG=b:140092163
BRANCH=None
TEST=Tested with the AA-AM1N95W charge through hub. Verfied
that this can be attached to Kohaku with external power already
connected and successfully power role swap into source to charge the
kohaku port. Tested 20-25 connections with no failures. Prior to this
change the failure rate was 1 out of 3 attempts.
Change-Id: Iebe53e0fc52bf817b709d58ef3e0ee7b226b0aa9
Signed-off-by: Scott Collyer <scollyer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1799288
Reviewed-by: Jett Rink <jettrink@chromium.org>
Tested-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: Scott Collyer <scollyer@chromium.org>
Commit-Queue: Scott Collyer <scollyer@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change CHARGE_MAX_SLEEP_USEC to 10 seconds.
BUG=b:133375756
BRANCH=octopus
TEST=Verify access battery once per 10 seconds by ec console.
Change-Id: I273ec13381d131866c536b879f5a912a63a53ecb
Signed-off-by: elthanhuang <elthan_huang@compal.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1852864
Reviewed-by: Jett Rink <jettrink@chromium.org>
Commit-Queue: Jett Rink <jettrink@chromium.org>
Tested-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some designs need to keep their battery from going to sleep.
Allow boards to specify their max delay for polling the
battery.
BUG=b:133375756
BRANCH=octopus
TEST=Verify access battery once per 10 seconds by ec console.
Change-Id: I7e70a45fe643af567434f8187344e0e0d18d733c
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1865253
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change moves the motion_sense_fifo_commit_data call
outside of the do...while loop in irq_handler. This is
needed to allow for 1 commit per last_interrupt_timestamp
which makes the commit more efficient and accurate.
BUG=b:137758297,b:140157960
TEST=Ran CTS on Kohaku (this doesn't fix all the issues but
improves the state)
BRANCH=None
Change-Id: Ifd680fb8d6eb47383928e25858898ac828fe4e92
Signed-off-by: Yuval Peress <peress@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1856829
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Refactor motion_sense_process to include less repeated code.
TEST=buildall and run on Kohaku
BUG=None
BRANCH=None
Change-Id: I2e5af84f20cc7e50d3ddfb39d661238643aa99b3
Signed-off-by: Yuval Peress <peress@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1856828
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change fixes #ifdef gaurds around CONFIG_USB_PD_TCPC_LOW_POWER
and CONFIG_USB_PE_SM by replacing it with IS_ENABLED condition
BUG=b:141971044
BRANCH=None
TEST=make buildall -j
Change-Id: I889752a8c4cdd8e22c97ede99643945fe2db868a
Signed-off-by: Ayushee <ayushee.shah@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1863823
Reviewed-by: Keith Short <keithshort@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=none
BRANCH=none
TEST=make buildall -j
Change-Id: I55453ddf1d1da0fdee902a33e14357716fb12c4a
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1859826
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=none
BRANCH=none
TEST=make buildall -j
Change-Id: I12fbeb0a85d45bce8173c0c3831f663f5b618cc8
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1862621
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The base attached switch is not exposed to userspace via /dev/input,
so provide an alternative way to read it on boot.
BRANCH=none
BUG=b:109839180
TEST=ectool mkbpget buttons/switches prints correct states
Change-Id: Id0314c7f15149ec8d863e43bd4a05a0f7bed9f02
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1844655
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org>
Reviewed-by: Joel Kitching <kitching@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=b:140610519
BRANCH=none
TEST=make sure ectool inventory has shown keyboard backlight support
with dratini/dragonair kbbacklit SKU.
Change-Id: I8fceebc417d4b5b319dbc6126d8311346f09bdcf
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1859234
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This allows it to be used by private host binaries (such as the one in
https://crrev.com/i/1914158), which may wish to follow the same pattern
as `ectool`. While we're at it, add some documentation comments.
BRANCH=none
BUG=chromium:1008568
TEST=Check `ectool` builds and runs.
Change-Id: I94b02f9b734f65b1344a79d6ac8752c40ecf1f04
Signed-off-by: Harry Cutts <hcutts@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1861075
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=none
BRANCH=none
TEST=buildall
Change-Id: I7f9089ce8028f12a94d8e73dd58a5bb36ebc614f
Signed-off-by: Edward Hill <ecgh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1862090
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Commit-Queue: Denis Brockus <dbrockus@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
pe_init() is called via pe_run(), so make it static.
BRANCH=none
BUG=none
TEST=build
Change-Id: I56928369e50a2022fc7e2aee2f68f09ebe7c06b6
Signed-off-by: Edward Hill <ecgh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1850191
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Just a simple rename. run_state() seems more readable to me,
and "run" is used in many of the related functions and comments.
exe_state used to be called sm_run_state_machine before the great
refactoring of CL:1733744.
BRANCH=none
BUG=none
TEST=build
Change-Id: I5fe9e5b98042d7a5b9b9e9bde48ebecbda420458
Signed-off-by: Edward Hill <ecgh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1848970
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Simplify the pd_task loop timeout by making it a fixed 5 milliseconds.
If there is nothing to do then it shouldn't take long to realize this.
This allows removal of evt_timeout, tc_set_timeout, tc_get_timeout.
BRANCH=none
BUG=none
TEST=usbc unit tests (make -j runhosttests)
Change-Id: I067309b191e5118fbe9e89a92a650fa837fb75fa
Signed-off-by: Edward Hill <ecgh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1857216
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When testing "Host Port VBUS Removed" at the end of
test_vpd_host_src_detection_vbus(), we go to TC_UNATTACHED_SNK but
then quickly move to TC_ATTACH_WAIT_SNK.
Reduce the task_wait_event() timeout in wait_for_state_change() to
make checking this transition more reliable.
BRANCH=none
BUG=none
TEST=usb_typec_ctvpd test still passes
Change-Id: I11a927fabbcff4a7adc50f5495fab796129b04ab
Signed-off-by: Edward Hill <ecgh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1857215
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add enable and reset IO expander signal definitions for USB-A PS8811
retimers.
BUG=b:138600008
BRANCH=none
TEST=none
Change-Id: I48731c143c08f450047a920c090c6abc6b30af4f
Signed-off-by: Edward Hill <ecgh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1854373
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change GPIO_EC_PCH_DSW_PWROK to GPIO_PCH_DSW_PWROK to match convention
for EC to PCH signals used by other Intel processors (specifically
cannonlake already used GPIO_PCH_DSW_PWROK).
BUG=none
BRANCH=none
TEST=buildall -j
Change-Id: I59fb8d3ee3867c70dde74c186ba3974490c3cd27
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1848252
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Commit-Queue: Denis Brockus <dbrockus@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change GPIO_EC_PCH_SYS_PWROK to GPIO_PCH_SYS_PWROK on cometlake to
conform with naming convention used on other Intel processors.
Leave gpio.inc files unchanged and add a mapping from
GPIO_EC_PCH_SYS_PWROK to GPIO_PCH_SYS_PWROK in the board files.
BUG=none
BRANCH=none
TEST=make buildall -j
TEST=boot kohaku
Change-Id: I722cb06dd90ee5d7e426664508f54a5cbe19de4a
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1848251
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Commit-Queue: Denis Brockus <dbrockus@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Replaced references of GPIO_EC_PCH_RSMRST_L with GPIO_PCH_RSMRST_L in
to match convention used in common Intel power sequencing. Boards
still use GPIO_EC_PCH_RSMRST_L in their gpio.inc files to match
schematic net names.
BUG=none
BRANCH=none
TEST=buildall -j
TEST=boot kohaku (cometlake device)
TEST=run "apshutdown" on kohaku
Change-Id: Ic9fa13dbf2d4e6c8953b82a9dd20f48a6cf8d2c8
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1846690
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Commit-Queue: Denis Brockus <dbrockus@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix sub function state_machine PWRBTN_STATE_INIT_ON case, should be
first check charge_prevent_power_on until POWER Button Time out.
BUG=b:141260790
BRANCH=Master
TEST=check PB task timing with power on timing be sure the same time.
Change-Id: I15a599773afe94e0730755dd60674cb4c4ea27d6
Signed-off-by: Ben Chen <ben.chen2@quanta.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1847571
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The default USB TYPE C connector facing receiver equalization
setting is 0x90, compensate for channel loss up to 15.4dB
It's high for some dongles. Apply lower USB EQ to 8.7dB
BUG=b:140472120
BRANCH=none
TEST=build and boot on, read back registers to verify
> ectool i2cread 8 2 0x16 0xe7
0x40
Signed-off-by: Lu Zhang <lu.zhang@bitland.corp-partner.google.com>
Change-Id: I1fce255d0dbe8c5a12cf8c8ff5b3c506e8d19475
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1830538
Reviewed-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Paul Ma <magf@bitland.corp-partner.google.com>
Tested-by: Paul Ma <magf@bitland.corp-partner.google.com>
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=b:142410208
BRANCH=none
TEST=buildall
Change-Id: I8eb8d2b8ef35572f50cc3dfd1a56b7503fadb1e1
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1859828
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
BRANCH=None
BUG=chromium:1011870
TEST=make -j buildall
Change-Id: Ifa0241cf9ea02ecf989fc7257f37c24efb17c3a7
Signed-off-by: Allen Webb <allenwebb@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1860720
Reviewed-by: LaMont Jones <lamontjones@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Corrects the spelling of "functions".
This is more text than the actual diff.
BRANCH=none
TEST=none
BUG=none
Change-Id: Id911bf020d8db9b1d6ad7bfb62d431c5114a64d8
Signed-off-by: Craig Hesling <hesling@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1854659
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If we use -1 instead of 0 for disabling timers, then we don't need to
check for the 0 value when evaluating the timer.
BRANCH=none
BUG=none
TEST=builds
Change-Id: Ie1e68579728d23d645d1f17f31210fc275c38e36
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1837999
Tested-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Instead of relying on the host's clock, we need to monotonically
increase a timestamp. This gives tests predictability.
BRANCH=none
BUG=chromium:1013701
TEST=ran usb_prl over 100 times without failure
Change-Id: Id4a1e9a8cbd9dd44509747916c9073444d71af5c
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1860474
Tested-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We were returning early within pe_src_discovery state and not giving
other conditions a chance to evaluate and transition states.
BRANCH=none
BUG=none
TEST=builds
Change-Id: If438479b5a8bf2a703760f84a85c48bc7db72507
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1837998
Tested-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We should transition to the hard reset state after the noResponseTimer
expires without getting a single PD response from a port partner until
we reach the hard reset count.
BRANCH=none
BUG=none
TEST=builds
Change-Id: Iaee53369dec863ed8220b9f4ffed5f252cf08c4d
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1837997
Tested-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=b:141723737
BRANCH=Master
TEST=Manual
Check tablet mode behavior for board version 1 and 2.
Change-Id: Iea992b726d9c5a8e4562362dbd24aec8460742c4
Signed-off-by: Michael5 Chen <michael5_chen@pegatroncorp.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1831933
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If PPC have CC OVP protection, check VBUS_GOOD.
If VBUS_GOOD is ok, release CC OVP.
BUG=b:141587322
BRANCH=Master
TEST=Manual
Do ESD test to trigger CC1/CC2 OVP.
Using EC console command PPC_DUMP to check ppc regiset is correct.
Change-Id: I3b817cc1dcec4c14ed4e2098b7ad7582b938f613
Signed-off-by: Michael5 Chen <michael5_chen@pegatroncorp.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1826098
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Has a set lid sensors place change.The rotation of lid
matrices need to be fixed.
BUG=b:142029194
BRANCH=Master
TEST=Using ec console 'accelinfo on' verified lid angle now goes
from 0 to 360 and swtiches to tablet mode after crossing 180 threshold.
Change-Id: I0cc5ef07368366f9a645fa44fa29cceec5181539
Signed-off-by: Ben Chen <ben.chen2@quanta.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1839712
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Philip Chen <philipchen@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add <, <=, >, >= tests to test_util.h
BUG=None
BRANCH=None
TEST=buildall
Change-Id: I5d8ddfc3eda59f0193707c77d52d97962ef1a325
Signed-off-by: Yuval Peress <peress@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1853694
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Due to a refactoring of bit shifts (BIT macro), LPTIM_PERIOD_US changed
from int to unsigned int, which in turn changed behavior of
set_lptim_event. This causes a watchdog reset during a long suspend. In
particular, this caused the stm32h7 FPMCU to reboot during long suspend
and fingerprint unlock to not work.
BUG=b:140538084
BRANCH=none
TEST=verified that FPMCU no longer reboots during deep sleep, fingerprint
unlock works after deep sleeping for a whole night.
Change-Id: If2ed9cb94aad4216012e28ffec530bc4ce858093
Signed-off-by: Yicheng Li <yichengli@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1854785
Reviewed-by: Nicolas Norvez <norvez@chromium.org>
|