summaryrefslogtreecommitdiff
path: root/baseboard/hatch
Commit message (Expand)AuthorAgeFilesLines
...
* hatch: Enable CONFIG_USBC_PPC_DEDICATED_INTTim Wawrzynczak2019-07-232-0/+9
* Remove __7b, __8b and __7bfDenis Brockus2019-07-202-3/+3
* Use 7bit I2C/SPI slave addresses in ECDenis Brockus2019-07-192-3/+3
* baseboard/hatch: Allow hatch variant to provide battery present infoFurquan Shaikh2019-07-162-0/+14
* hatch/helios/kindred/kohaku: Enable EC-based display backlight controlPhilip Chen2019-07-021-0/+4
* hatch: move forward led_states to common/led_onoff_statesDevin Lu2019-06-154-203/+1
* hatch: Make MST support optional for subboardsPhilip Chen2019-06-142-6/+8
* intel_x86/power: Consolidate chipset specific power signals arrayVijay Hiremath2019-06-132-37/+0
* baseboard: hatch: Limit printf on serial consoleGwendal Grignou2019-05-141-0/+8
* hatch: Enable CONFIG_CMD_CHARGER_DUMPScott Collyer2019-05-091-0/+3
* hatch/kohaku: Account for TCPC reset polarity in ALERT handlerScott Collyer2019-05-081-5/+9
* hatch/kohaku: Account for different bc1.2 chipsScott Collyer2019-04-202-14/+0
* hatch/kohaku: Move HDMI support to board-specific.Tim Wawrzynczak2019-04-191-3/+0
* hatch/kohaku: Remove Type A USB support for Kohaku.Tim Wawrzynczak2019-04-192-13/+0
* hatch/kohaku: Move TCPC definitions to board from baseboardScott Collyer2019-04-172-59/+31
* tcpm: Refactor tcpc_config to include a flags fieldScott Collyer2019-04-171-2/+4
* hatch: Enable CONFIG_POWER_S0IX_FAILURE_DETECTIONEvan Green2019-04-031-0/+1
* hatch: Enabling tablet modezack_yang2019-03-191-0/+3
* hatch: Enable PP5000_CONTROL for BC1.2 to work in G3Scott Collyer2019-03-161-0/+1
* hatch: Enable sensors sync via dedicated IRQ pinPhilip Chen2019-03-141-5/+1
* hatch: Add CONFIG_DPTFScott Collyer2019-03-131-0/+1
* hatch: Disable HW_RAMP until bq25710 ICO mode is changedScott Collyer2019-03-131-1/+0
* hatch: Remove CONFIG_USB_PD_VBUS_MEASURE_NOT_PRESENTPhilip Chen2019-03-011-1/+0
* hatch: Add support for BMA253 lid accel sensor and lid angle detectionScott Collyer2019-02-271-0/+11
* hatch: Add support for base accelgyro bmi160 sensorScott Collyer2019-02-271-0/+20
* hatch: Enable CONFIG_CPU_PROCHOT_ACTIVE_LOWPhilip Chen2019-02-191-0/+1
* hatch: Enable bc1.2 supportScott Collyer2019-02-192-1/+22
* hatch: Enable S0IX config optionsScott Collyer2019-02-131-3/+2
* hatch: Define host battery full factor as 100%Philip Chen2019-02-131-0/+2
* hatch: Add support for MST (multi stream transport) enableScott Collyer2019-02-123-0/+34
* hatch: Support CBIPhilip Chen2019-02-061-0/+3
* hatch: Add support for PSL wake sourcesScott Collyer2019-01-312-0/+12
* hatch: Add support for fan and temperature sensorsScott Collyer2019-01-301-0/+1
* hatch: Add support for keyboard backlightScott Collyer2019-01-302-0/+5
* hatch: Add support for keyboard scanScott Collyer2019-01-302-0/+30
* hatch: Add smart control for USB-A portsScott Collyer2019-01-302-1/+12
* hatch: Add vboot config options to baseboard.hScott Collyer2019-01-291-0/+5
* hatch: Add support for 2 color LEDScott Collyer2019-01-293-0/+203
* hatch: Add support for charging and USB type CScott Collyer2019-01-295-0/+745
* hatch: Add support for power sequencingScott Collyer2019-01-242-1/+103
* hatch: Initial skeleton for hatchScott Collyer2019-01-243-0/+60
View Lorry Controller Status